Peugeot 307 CC Dag 2006 Owner's Guide

2MULTIFUNCTION DISPLAYS
29
MONOCHROME DISPLAY C
(without RD4 audio equipment)
Presentation
Three buttons and a navigator ena-
ble you to control the display:
- "MENU" to display the general
menu,
- "MODE" to change the permanent
application (trip computer, date, ...),
- "ESC" to abandon the operation in
progress,
- Rotation of the navigator: move-
ment on the display or changing of
a setting,
- Press on the navigator: confirma-
tion of the selection.
It displays the following information:
- the time,
- the date,
- the exterior temperature (the value
displayed flashes if there is a risk of
ice),
- the accesses check (doors, boot, ...),
- the warning messages (e.g.: "Depollution system faulty") or infor-
mation messages (e.g.: "Automatic
headlamp lighting activated"), dis-
played temporarily, can be cleared
by pressing the "ESC" button,
- the trip computer (see correspond- ing section). Press the
"MENU" button to access
the general menu:
- trip computer (see corresponding section),
- personalisation-configuration.
Turn the navigator to select the menu
required, then confirm by pressing
the navigator.
Once this menu has been selected,
you can access the following func-
tions:
- define the vehicle parameters,
- display configuration,
- selection of the language.
Parameter configuration General menu
"Personalisation-
Configuration" menu

2MULTIFUNCTION DISPLAYS
30
Define the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the fol-
lowing equipment:
- automatic switching on of the lights,
- "follow-me-home" lighting and duration,
- parking assistance. Selection of the language
Once this menu has been selected,
you can change the language
used on the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
Display configuration
Once this menu has been selected,
you can access the following set-
tings:
- brightness-video setting,
- date and time setting,
- selection of the units.
Once you have selected a setting,
press the navigator.
Turn the navigator to change the
value of the setting selected.
Press the navigator to record the
change and move on to the next set-
ting or press the
"ESC" key to can-
cel.Example: "Duration of the "follow-
me-home" lighting"
For safety reasons, configu-
ration of the multifunction
displays by the driver must
take place when stationary.

2MULTIFUNCTION DISPLAYS
31
MONOCHROME SCREEN C
Press the "MENU" button to gain
access to the general menu:
- audio functions,
- trip computer (see corresponding section),
- personalisation-configuration,
- telephone (hands-free kit).
Press the " " or " " buttons to
select the menu required, then con-
firm by pressing the "OK" button.
Presentation
This displays the following informa-
tion, via the RD4 audio equipment
control keypad:
- the time,
- the date,
- the outside temperature (this
flashes if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Depollution system faulty") or infor-
mation messages (e.g.: "Automatic
headlamp lighting activated"), dis-
played temporarily, can be cleared
by pressing the "ESC" button,
- the trip computer (see correspond- ing section).
"Audio functions" menu
With the RD4 audio equipment
switched on, once this menu has been
selected, you can activate or deacti-
vate the functions linked with the use
of the radio (RDS, REG, RadioText),
the CD or the CD changer (introscan,
random play, CD repeat). Once this menu has been selected,
you can gain access to the following
functions:
- define the vehicle parameters,
- display configuration,
- selection of the language.
General menu "Personalisation-
Configuration" menu

2MULTIFUNCTION DISPLAYS
32
Define the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the fol-
llowing equipment:
- automatic switching on of the lights,
- "follow-me-home lighting" and duration,
- parking assistance. Selection of the language
Once this menu has been selected,
you can change the language
used by the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
Display configuration
Once this menu has been selected,
you can gain access to the following
settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
When you have selected a setting,
press the
"OK" button, then press
the " " or " " buttons to change its
value.
Press the "OK" button to record the
change and move on to the next set-
ting or press the "ESC" button to
cancel.Example: "duration of follow-me-
home lighting"
For safety reasons, configu-
ration of the multifunction
displays by the driver must
take place when stationary.

2MULTIFUNCTION DISPLAYS
33
MONOCHROME SCREEN CT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control keypad:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (telephone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Fuel level low") and vehicle function
status messages (e.g.: "Automatic
headlamp lighting activated") dis-
played temporarily,
- the trip computer display,
- the satellite navigation system dis- plays. In order to enable you to use all of
your system's functions, you have
two CD-Roms:
- one, "Configuration", contains the
software and the various display
languages and spoken informa-
tion,
- the other, "Navigation", contains the satellite navigation system map
data. Press the
"MENU" button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- configuration.
For further details regarding these
functions, refer to the corresponding
section.
General menu

2MULTIFUNCTION DISPLAYS
34
The "Display configuration" menu
provides access to the following
parameters:
• "Brightness setting": setting of the brightness of the display,
• "Sound": setting of the voice syn- thesiser (for the male/female voice
parameter: insert the configuration
CD-Rom); setting of the voice com-
mands,
• "International parameters": set- ting of the date and time (12 or 24
hour mode, adjustment of the min-
utes on GPS); selection of the units
(l/100 - °C or mpg - °F),
• "Selection of the language": selec- tion of the language of the dis-
play, information and voice com-
mands (Français, English, Italiano,
Portugues, Espanol, Deutsch,
Nederlands: insert the configura-
tion CD-rom ).
For safety reasons, configu-
ration of the multifunction
displays by the driver must
take place when stationary.
This provides access to successive
confirmation windows.
Example: "duration of follow-me-
home lighting"
Define the vehicle parameters
This enables you to activate or deac-
tivate certain driving and comfort
functions:
- automatic switching on of the
lights,
- "follow-me-home" lighting and duration,
- parking assistance.
"Configuration" menuDisplay configuration

2MULTIFUNCTION DISPLAYS
35
COLOUR SCREEN DT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control panel:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (tel- ephone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Fuel level low") and vehicle function
status messages (e.g.: "Automatic
headlamp lighting activated") dis-
played temporarily,
- the trip computer display,
- the satellite navigation system dis- plays. In order to enable you to use all of
your system's functions, you have
two CD-Roms:
- one, "Configuration", contains the
software and the various display
languages and spoken informa-
tion,
- the other, "Navigation", contains the satellite navigation system map
data.
Press the "MENU" button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- configuration,
- map,
- video.
For further details regarding these
functions, refer to the corresponding
section.
General menu

2MULTIFUNCTION DISPLAYS
36
The "Display configuration" menu
provides access to the following
parameters:
• "Select the colours": selection from the palette of colours available for
the display,
• "Brightness and intensity": setting of the brightness and intensity of
the display,
• "Sound": setting of the voice syn- thesiser (for the male/female voice
parameter: insert the configuration
CD-Rom); setting of the voice com-
mands,
• "International parameters": set- ting of the date and time (12 or 24
hour mode, adjustment of the min-
utes on GPS); selection of the units
(l/100 - °C or mpg - °F),
• "Selection of the language": selec- tion of the language of the dis-
play, information and voice com-
mands (Français, English, Italiano,
Portugues, Espanol, Deutsch,
Nederlands: insert the configura-
tion CD-rom).
This provides access to successive
confirmation windows.
Define the vehicle parameters
This enables you to activate or deac-
tivate certain driving and comfort
functions:
- automatic switching on of the
lights,
- "follow-me-home" lighting and duration,
- parking assistance. Example: "Automatic switching on of
the lights"
"Configuration" menuDisplay configuration

2MULTIFUNCTION DISPLAYS
37
A FEW DEFINITIONS...
Superimposed display
This is a window which appears tem-
porarily over the current application
to announce a change of status of
another application.
Permanent application
This is the main application currently
in use, displayed as the main screen
window.
Contextual menu
This is a menu, limited to the main
functions of the main application cur-
rently in use, displayed as the main
screen window.
You can connect video equipment
(camcorder, digital camera, DVD
player, ...) to the three audio/video
sockets, located in the glove box.
Videos can only be displayed
when stationary. Select the
"Video" menu from the
general menu :
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
contrast and the colours.
Pressing the "MODE" or "DARK"
button disconnects the display from
the video.
Successive presses on the
"SOURCE" button permit the selec-
tion of an audio source other than
that of the video.
For safety reasons, configu-
ration of the multifunction
displays by the driver must
take place when stationary.
"Video" menu

3COMFORT
38