Peugeot 307 SW 2004 Owner's Manual

146
15-03-2004
147
15-03-2004
Direction indicator side repeaters
(WY 5 W amber).
F Push the repeater forwards and
release the assembly.
F Hold the connector and turn the
lens a quarter turn.
F Change the bulb.
PRACTICAL INFORMATION
Amber coloured bulbs
(direction indicators and
side repeaters), must be
replaced with bulbs of
identical speciication and
colour.

148
15-03-2004
149
15-03-2004
PRACTICAL INFORMATIONThird brake light:
4
W 5 W bulbs.
F Remove the tailgate upper trim
carefully by unclipping it on either
side, perpendicular to its direction
of engagement.
F Insert a screwdriver into the two
outer holes B to press on the two
tabs C.
F Push the light unit outwards while
maintaining the pressure on the
tabs.
F Pull the light unit outwards while
tilting it.
F Change the faulty bulb.
F When reitting, ensure that the
light unit tabs are engaged cor-
rectly and that the tailgate upper
trim has been put back in place
correctly.
Rear lights
1 - Brake lights (P 21 W).
2 - Side lights (R 5 W).
3 - Direction indicators (P 21 W).
4 - Reversing light (P 21 W), left
side.
Fog lamp (P 21 W), right side.
These 5 bulbs are changed by re-
moving the light:
F Remove the respective boot side
trim to access the light.
F Remove the mounting nut for the
light inside the boot.
F Remove the mounting nut for the
light outside the boot.
F Remove the light.
F Unclip the harness. F
Press the tab A and remove the
bulb holder.
F Change the faulty bulb.
Note: if necessary use the wheel-
brace to remove the bolts.
When reitting, take care to position
the bulb holder and the bulb cor-
rectly.
Number plate lights (W 5 W)
F Insert a small screwdriver in one
of the external holes of the lens.
F Push the lens outwards to unclip
it.
F Remove the lens.
F Change the faulty bulb.

150
15-03-2004
151
15-03-2004
CHANGING A FUSE
The fuse boxes are located under
the fascia (left-hand side) and in the
engine compartment.
The spare fuses and special pliers A
are ixed to the inside of the lid of the
instrument panel fuse box.
Removing and changing a
fuse
Before changing a fuse you must
establish the cause of the fault and
have it corrected. The fuse numbers
are indicated on the fuse box.
F Use the special pliers A.
Always change a faulty fuse for
one of the same rating.
Correct Incorrect Pliers AInstrument panel fuses
F Unscrew the bolt a quarter of a
turn with a coin, then pull the han-
dle to open the cover and access
the fuses.
PRACTICAL INFORMATION
Fuse no. Rating Functions
1 10 A Rear fog lamp.
2 15 A Rear screen wiper.
4 15 A Front electric windows.
5 15 A Left brake light including trailer.
7 30 A Rear courtesy light, front courtesy light, map
readers - 12 V front socket - Glove box lighting -
Sunroof shutter.

152
15-03-2004
153
15-03-2004
PRACTICAL INFORMATIONEngine compartment fuses
Fuse box
To access the fuse box in the engine
compartment (next to the battery):
F unclip the cover.
Carefully close the cover and re-
it the style cover when you have
inished.
Fuse N° Rating Functions
1* 50 A
460 W fan unit.
30 A 200 W fan unit.
2* 30 A ESP/ABS pump motor.
3* 30 A ESP/ABS solenoid valves.
4* 70 A Built-in Systems Interface supply.
5* 70 A Built-in Systems Interface supply.
6* - Not used.
7* 30 A Ignition switch, power.
8* 70 A Power steering electro-pump unit. The electrical system of
your vehicle is designed
to operate with standard
or optional equipment.
Before installing other electri-
cal equipment or accessories on
your vehicle, contact a PEUGEOT
dealer.
PEUGEOT will not accept respon-
sibility for the cost incurred in re-
pairing your vehicle or for rectify-
ing the malfunctions resulting from
the installation of accessories not
supplied and not recommended
by PEUGEOT and not installed in
accordance with its instructions, in
particular where the equipment in
question consumes more than 10
milliamperes.
* The maxi-fuses provide addi- tional protection for the electrical
systems. All work on the maxi-
fuses must be carried out by a
PEUGEOT dealer.

152
15-03-2004
153
15-03-2004
PRACTICAL INFORMATION
Fuse N° RatingFunctions
1 10 A Automatic gearbox reversing lights switch - Automatic gearbox starting
inhibitor relay control -
Manual gearbox reversing lights switch - Vehicle speed sensor - Wate r in diesel sensor.
2 15 A Canister solenoid valve - Fuel pump.
3 10 A Power steering control unit - ABS or ESP control unit.
4 10 A Injection control unit - Fan unit relay control - Additional
heating relay control - Automatic
gearbox control unit - Automatic gearbox sequential control - Auto matic gearbox shiftlock relay.
5 15 A Particulate emission ilter control unit.
6 15 A Front fog lamps.
7 - Not used.
8 20 A Fan unit relay control - Engine control unit supply - Injection pump (Diesel).
9 15 A Left dipped beam.
10 15 A Right dipped beam.
11 10 A Right main beam.
12 10 A Left main beam.
13 15 A Horn.
14 10 A Front and rear windscreen wash pumps.
15 30 A Oxygen sensors - Exhaust gas recirculation solenoid valve - Ignition co
il - Diesel high
pressure regulator - Injectors supply (petrol) - Pre-heat unit - Air low se nsor (Diesel) - Engine
control unit (Diesel) - Injection pump (Diesel) - Diesel heater.
16 30 A Petrol engine air pump with automatic gearbox.
17 30 A Low/high speed front wiper.
18 40 A Air conditioning blower.

150
15-03-2004
151
15-03-2004
CHANGING A FUSE
The fuse boxes are located under
the fascia (left-hand side) and in the
engine compartment.
The spare fuses and special pliers A
are ixed to the inside of the lid of the
instrument panel fuse box.
Removing and changing a
fuse
Before changing a fuse you must
establish the cause of the fault and
have it corrected. The fuse numbers
are indicated on the fuse box.
F Use the special pliers A.
Always change a faulty fuse for
one of the same rating.
Correct Incorrect Pliers AInstrument panel fuses
F Unscrew the bolt a quarter of a
turn with a coin, then pull the han-
dle to open the cover and access
the fuses.
PRACTICAL INFORMATION
Fuse no. Rating Functions
1 10 A Rear fog lamp.
2 15 A Rear screen wiper.
4 15 A Front electric windows.
5 15 A Left brake light including trailer.
7 30 A Rear courtesy light, front courtesy light, map
readers - 12 V front socket - Glove box lighting -
Sunroof shutter.

150
15-03-2004
151
15-03-2004
PRACTICAL INFORMATION
Fuse no. RatingFunctions
9 30 A Front electric windows - Automatic electric windows - Sunroof shutte r.
10 15 A Diagnostic plug - 12 volts rear socket - trailer.
11 20 A Audio equipment - Multifunction displays - Steering wheel contro ls - Automatic gearbox.
12 10 A Front right side light, rear right side light - Number plate
and trailer lighting - Central locking/
alarm//hazard warning lights/ESP switch lights - Air conditioning/ ashtray light - Automatic
gearbox switch lights - Lighter.
14 30 A Door opening/closing controls - Deadlocking controls.
15 30 A Press operation electric rear windows.
16 10 A Engine fuse box - Alarm - Particulate emission ilter - Steering wheel controls - Air bags.
17 10 A Rear right brake light, 3rd brake light.
18 10 A Diagnostic plug - Steering wheel controls - Electrochromatic interio
r mirror - Brake pedal
(stop) and clutch switches - Coolant level switch - Second brake swit ch.
19 30 A PARC shunt.
22 10 A Front left side light, rear left side light - Number plate and trailer lighting.
23 15 A Alarm siren - Interior alarm control unit.
24 15 A Instrument panel - Audio equipment - Multifunction displays - Air
conditioning -
Rear parking assistance - Rain/brightness sensor.
26 30 A Heated rear screen.
27* 10 A Air bags.
* Fuse located on the ceiling of the fuse box.

154
15-03-2004
155
15-03-2004
PRACTICAL INFORMATION
CHANGING A WINDSCREEN
WIPER BLADE
Special front windscreen wiper
position
F Within one minute of switching off
the ignition, operate the wipers
stalk to position the wiper blades
in the centre of the windscreen
(maintenance position).
Changing a wiper blade
F Lift the wiper arm, then unclip the
blade and remove it.
F Fit the new blade and push back
the arm.
Note: the shortest blade is itted on
the vehicle's right-hand windscreen
wiper arm.
To return the windscreen wipers
to their normal position, switch on
the ignition and operate the wiper
stalk.
ECONOMY MODE FUNCTION
After the engine has stopped, with
the key in the accessories position,
certain functions (windscreen wiper,
electric windows, courtesy lights,
audio equipment etc.) can only be
used for a cumulative duration of
thirty minutes, to prevent discharging
the battery.
Once the thirty minutes are over, the
message "Economy mode active"
appears on the multifunction display
and the active functions are put on
standby.
To resume the use of these functions
immediately, start the engine and let
it run for a few seconds.
A lat battery will prevent
the engine from starting
.
LOAD REDUCTION
FUNCTION
When driving, certain functions (air
conditioning, heated rear screen,
heating system for passenger com-
partment of diesel vehicles, etc.) may
be switched off temporarily, depend-
ing on the level of battery charge.
Reactivation of these functions is
automatic, once the battery charge
is suficient.
Note: at the risk of discharging the
battery, the functions that have been
switched off may be reactivated
manually.

154
15-03-2004
155
15-03-2004
PRACTICAL INFORMATION
BATTERY
To charge the battery using a
battery charger:
- Disconnect the battery.
- Follow the instructions for use given by the battery charger manu-
facturer.
- Reconnect starting with the nega- tive (-) terminal.
- Check that the terminals and connectors are clean. If they are
covered with sulphate (white or
greenish deposit), disconnect them
and clean them.
To start the vehicle from
another battery:
- Connect the red cable to the positive (+) terminals of the two batteries.
- Connect one end of the green or black cable to the negative (-) ter-
minal of the slave battery.
- Connect the other end of the green or black cable to an earth point on
the broken down vehicle as far as
possible from the battery.
Operate the starter, let the engine run.
Wait for the engine to return to idle,
then disconnect the cables.
- Before disconnecting
the battery, you must
wait for 2 minutes after
switching off the igni-
tion.
- Never disconnect a terminal
when the engine is running.
- Never charge a battery without irst disconnecting the terminals.
- Close the windows and the roof concealing shutter before
disconnecting the battery. If the
windows and the shutter do not
operate normally following re-
connection of the battery, they
must be reinitialised (see section
"Reinitialisation of the electric
windows" and "Panoramic roof").
- After every reconnection of the battery, switch on the ignition and
wait 1 minute before starting to
allow the electronic systems to
be initialised. If slight dificulties
are experienced after this, please
contact a PEUGEOT dealer.
It is advisable to disconnect the
battery if the vehicle is not to be
used for a period of more than
one month.

156
15-03-2004
157
15-03-2004
PRACTICAL INFORMATION
Without lifting
(4 wheels on the road)
You should always use a tow bar.
The removable towing eye is inside
the boot right-hand trim.
From the front:
F Unclip the cover, by pressing the
bottom part.
F Screw in the removable towing
eye as far as it will go. From the rear:
F
Unclip the top of the cover using a
coin.
F Screw in the removable towing
eye as far as it will go.
Lifting (2 wheels only on the road)
It is preferable to raise the vehicle
with a professional lifting device. Special features of the automatic
gearbox
When towing with four wheels on the
ground, the following rules must be
obeyed:
- lever in position
N,
- tow the vehicle at less than 30 mph (50 km/h) over a maximum dis-
tance of 30 miles (50 km).
- do not add oil to the gearbox.
When towing with the
engine switched off, there
is no braking or steering
assistance.
TOWING YOUR
VEHICLE