Peugeot 307 SW 2007 Workshop Manual

49
This automatically and gradually changes between the day and night positions. To prevent dazzling, the glass of the mirror darkens auto-matically depending on the intensity of the light from behind. It clears as the light (headlamps of following ve-hicles, sunlight) decreases, ensuring maximum visibility.
Manual interior mirror
The interior mirror has two positions:
- day (normal),- night (anti-dazzle).To change from one to the other, push or pull the lever on the lower edge of the mirror.
Operation
Switch on the ignition and press switch 1:
- Indicator light 2 lit (switch pressed): automatic operation.- Indicator light 2 off: automatic system off. The mirror remains at its most clear.
Special feature
To ensure maximum visibility dur-ing manoeuvres, the mirror clears automatically when reverse gear is engaged.
When the vehicle is stationary, un-lock the steering wheel by pulling handle A.
Adjust the height and depth of the steering wheel.
Lock it by pushing handle A down fully.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENTAutomatic day/night interior mirror

49
This automatically and gradually changes between the day and night positions. To prevent dazzling, the glass of the mirror darkens auto-matically depending on the intensity of the light from behind. It clears as the light (headlamps of following ve-hicles, sunlight) decreases, ensuring maximum visibility.
Manual interior mirror
The interior mirror has two positions:
- day (normal),- night (anti-dazzle).To change from one to the other, push or pull the lever on the lower edge of the mirror.
Operation
Switch on the ignition and press switch 1:
- Indicator light 2 lit (switch pressed): automatic operation.- Indicator light 2 off: automatic system off. The mirror remains at its most clear.
Special feature
To ensure maximum visibility dur-ing manoeuvres, the mirror clears automatically when reverse gear is engaged.
When the vehicle is stationary, un-lock the steering wheel by pulling handle A.
Adjust the height and depth of the steering wheel.
Lock it by pushing handle A down fully.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENTAutomatic day/night interior mirror

50
FRONT SEATS
1. Forwards/backwards adjustment
Lift the control and slide the seat forwards or backwards.
2. Driver’s or passenger’s seat height adjustment
Pull the handle upwards or push it downwards as many times as neces-sary to obtain the required position.
3.Seatback angle adjustment
Push the handle towards the rear.
4. "Aircraft" style table
There is an "aircraft" style table, fitted with a can holder, at the rear of each front seat.

51
5. Head restraint heightand angle adjustment
To raise the head restraint, pull it upwards.
To remove the head restraint, press the lug A and pull the head restraint upwards.AA
To put the head restraint back in po-sition, locate the stems of the head restraint in the holes, taking care to keep them in line with the seat back.
To lower the head restraint, press the lug A and the head restraint at the same time.
The head restraint frame has a catch which prevents it from lowering; this safety device provides protection in the event of an impact.
REAR HEAD RESTRAINTS
These have a high position for when they are in use and a low position for when they are stored.
The head restraints arealso remov-able.
To remove them, pull upwards as far as the stop, then press the lug (side seat) or the two lugs (centre seat).
Never drive with the head restraints removed; they should be in place and cor-rectly adjusted.
6. Armrests
These can be folded down and are removable.
To remove them, press the button located between the armrest and the side of the seat and pull it.
7. Storage drawers
There is a storage drawer under each front seat*.
- To open it, lift it and pull.- To take it out, open it to its full extent, press the ends of the slides and lift it, then remove it completely.- To put it back in place, at the end of its travel, press the top of the drawer to secure it.Under the front passenger seat, the layout of the floor allows for storage of a first aid kit and a warning triangle (small version).
The adjustment is correct when the upper edge of the head restraint is level with the top of the head.
To tilt the head restraint, tilt the lower part forwards or backwards.
Do not place heavy objects in the drawers.
* According to version.

52
Exit from the 3rd row or folding from the boot
Place the head restraint in the low position.
Fold the seat back onto the cushion using the strap B.
Note: you can lock the seat back in this position (for removal) by press-ing down on it.
Pull the strap C upwards to release the rear feet.
Place the seat in the folded position.
Forwards-backwards adjustment*
Lift the bar A and slide the seat forwards or backwards.
* Except additional seat.
Seat back angle adjustment
Pull the strap B, at the front of the seat on the right or on the left, then adjust to the required angle.
Release the strap to lock.
To adjust the angle of the seat back from the 3rd row or the boot, pull the strap B at the rear of the seat.
Note: the additional seat can be angled and folded by means of the strap B at the rear of the seat on the right or on the left.
Access to the 3rd row
Place the head restraint in the low position.
If necessary, push the seat backusing bar A.
Fold the seat back onto the cushion using the strap B.
Note: you can lock the seat back in this position (e.g. for removal) by pressing down on it.
Pull the strap C upwards to release the rear feet.
Place the seat in the "folded" position.
Folding a side seatREAR SEATS

53
Place the head restraint in the low position.
Fold the seat back onto the cushion using the strap B.
You now have a small table with four can holders, two pen holders and a document holder.
Folding the centre seat
Place the head restraint in the low position.
Fold the seat back onto the cushion using the strap B.
Note: you can lock the seat back in this position (for removal) by press-ing down on it.
Pull the strap C upwards to release the rear feet.
Place the seat in the folded position.
While driving, attach the retain-ing strap (contained in the storage pocket of one of the front seats) on one side to the carrying handle F and on the other side, to one of the stems of a front head restraint.
Place the head restraint in the low position.
Pull the strap B (at the rear of the seat to the right or to the left) back-wards then press on the seat back to release it, while continuing to pull the strap.
Fold the seat back onto the seat cushion.
Note: you can lock the seat back in this position (for removal) by press-ing down on it.
Push the two levers D upwards to unlock the rear feet.
Place the seat in the folded position.
While driving, attach the retain-ing strap (contained in the storage pocket of the additional seat) on one side to the carrying handle F and on the other side, to the rear armrest grab handle.
Centre seat tablepositionFolding an additionalseat

54
Fold the corresponding seat.
Tilt the two red levers E under the seat to release the front feet.
Lift it and carry it using the carrying handle F.
In the 3rd row, position the fixing point closers to obtain a flat boot floor.
Refitting a seat
In the 3rd row, first remove the floor fixing point closers using a thin screwdriver.
Before positioning the 3rd row seats, move those of the 2nd row forward if necessary.
Check that nothing is obstructing the floor fixing points thus prevent-ing correct locking of the seat feet.
Carry the seat using the carrying handle F.
Position the front feet in the securing points and lock them by means of the two red levers E.
Locked
Pull the strap C upwards to check that the rear feet are free.
Tilt the folded seat backwards.
The rear feet lock automatically.
Check that the seat is locked correctly.
Lift the seat back, first releasing it by pulling the strap B.
To lock the additional seats, press the two levers D.
Only lock the seat back on the cushion occasionally, to avoid undue wear of the seat covers.
Avoid placing luggage on folded seats.
Never use the adjusting straps to remove, refit or carry a seat, use the carrying handle provided for this purpose.
Free
Removing a seat

55
SEAT MODULARITY AND DIFFERENT CONFIGURATIONS
The design of your vehicle and of its seats offers multiple seat configurations.
There are side seats which can be installed in the 2nd or 3rd row, on the right or on the left.
Once the centre seat has been removed from the 2nd row, you can recentre the side seats for more comfort.
There is also a centre seat, fitted in the central position of the 2nd row, which can also be installed in the left position in the 3rd row.
In this case, you must use the 3rd row rear left seat belt without passing it through the strap guide.
You can add up to two additional seats in the 3rd row, on the right or on the left.
The various operations resulting in modifica-tion of the existing configuration must be carried out when the vehicle is stationary (see "Seats" section).
Examples of varied arrangements combining comfort and practicality:
5 seats
4 seats with table position

56
5 seats with centre seat in the 3rd row
Transportation of long objects
4 seats with side seat in the 3rd row
Loading of a large volume

57
6 seats with an additional seat and the centre seat in the 3rd row
5 seats with table position and one additional seat
7 seats with two additional seats
5 seats with two folded additional seats