Peugeot 307 SW Dag 2005 Service Manual

Multifunction displays38 -
28-02-2005
39Multifunction displays-
28-02-2005
A FEW DEFINITIONS...
Superimposed display
This is a window which appears tem-
porarily over the current application
to announce a change of status of
another application.
Permanent application
This is the main application currently
in use, displayed as the main screen
window.
Contextual menu
This is a menu, limited to the main
functions of the main application cur-
rently in use, displayed as the main
screen window.
"Video" menu
You can connect video equipment
(camcorder, digital camera, DVD
player, ...) to the three audio/video
sockets, located in the glove box.
Videos can only be displayed
when stationary.Select the
"Video" menu from the
general menu :
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
contrast and the colours.
Pressing the "MODE" or "DARK"
button disconnects the display from
the video.
Successive presses on the
"SOURCE" button permit the selec-
tion of an audio source other than
that of the video.
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

40 -
28-02-2005
41
-
28-02-2005
Audio equipment and telematics
The RD4 is a radio, power 4x15 W,
with a single CD player on the front
panel.
It is itted with:
- a special socket for connection of
the CD changer,
- an analogue input which can be ac- tivated by the PEUGEOT network
(Aux 1) for MP3 players, hands-
free kits or navigation systems (ac-
cessories),
- 6 speakers (2 tweeters, 2 woofers and two broad band),
- a Radio/CD/CD changer/Trip Com- puter control panel,
- a tuner with 18 FM memories (3 wavebands) and 6 AM memories,
- a processor for digital processing of the sound, "DSP" (Digital Sound
Processor).
THE CONTROL PANEL AND
FUNCTIONS LINKED WITH
THE RD4
Anti-theft system
The audio equipment is coded in
such a way that it can only work in
your vehicle. If you wish to install
it in another vehicle, contact your
PEUGEOT dealer for coniguration
of the system.
The anti-theft system is automatic.
No action on your part is required.
Radio
With RDS/REG/EON/TA/PTY func-
tions.
Radio Text compatible.
CD player
CD Text  compatible.
If the TA (Trafic Announcement)
function is active, interruption by
Trafic Information is possible.
5 disc CD changer
With random play and playing of the
beginning of tracks functions.
If the TA (Trafic Announcement)
function is active, interruption by
Trafic Information is possible.

40 -
28-02-2005
41
-
28-02-2005
Audio equipment and telematics
Control pad
Button (A)
ON/OFF and volume adjustment. Keypad (2)
SOURCE: switching of the source
between the radio, CD, CD changer
and Aux 1 (if conigured).
BAND AST: selection of the frequen-
cy wavebands FM1, FM2, FMast
(Autostore function) and AM. ¯
: access to the musical ambience,
automatic volume adjustment, left/
right sound distribution, rear/front
sound distribution, loudness, treble
and bass settings.
LIST REFRESH: displaying and up-
dating of the list of stations received,
of the tracks on the CD.
Button (B)
CD eject.
Keypad (1)
MODE: changing of the display of the
permanent application (audio equip-
ment, trip computer, ...).
DARK: 1st press: black screen under
the banner - 2nd press: completely
black screen - 3rd press: return to
the display. Keypad (3) (numeric block)
Storing of the radio station.
Selection of the stored station, or of
the CD in relation to the position in
the CD changer.
Keypad (4)
ESC (Escape): cancellation of the
operation in progress.
MENU: displaying of the general
menu.
Keypad (5)
The navigator.
Button (C)
TA: function on/off (trafic information
priority).
PTY: access to the function (search
by type of programme, if the coding
is activated by the broadcasting sta-
tions).

Audio equipment and telematics42 -
28-02-2005
43Audio equipment and telematics-
28-02-2005
Navigator
Located on the RD4 audio equip-
ment control keypad, this enables
you to select and conirm the func-
tions, commands and parameters
displayed.
It incorporates:
- the up 5, down 6, left 7, right 8
arrows which enable you to move
the cursor on the screen,
- the central conirmation button.
All selections can be cancelled
prior to conirmation by pressing the
"ESC" button or automatically after a
few seconds without any action.
Details of each of the keypad con-
trols are indicated on the following
pages.
Audio equipment steering
wheel control
Volume adjustment
1. Increase by pressing the back
2. Decrease by pressing the back
1+2. Cutting off/Restoring of the
sound
Search/Selection by pressing
3. Higher radio frequency - CD/CD
changer: next track
4. Lower radio frequency - CD/CD
changer: previous track Sound sources
5.
Change of sound source
Selection of stations/CD changer
CD by rotation
6. Higher stored station - Next CD
7. Lower stored station - Previous
CD
This allows you direct and easy ac-
cess to most of the audio functions
which are also available on the audio
equipment control panel.

Audio equipment and telematics42 -
28-02-2005
43Audio equipment and telematics-
28-02-2005
Navigator
Located on the RD4 audio equip-
ment control keypad, this enables
you to select and conirm the func-
tions, commands and parameters
displayed.
It incorporates:
- the up 5, down 6, left 7, right 8
arrows which enable you to move
the cursor on the screen,
- the central conirmation button.
All selections can be cancelled
prior to conirmation by pressing the
"ESC" button or automatically after a
few seconds without any action.
Details of each of the keypad con-
trols are indicated on the following
pages.
Audio equipment steering
wheel control
Volume adjustment
1. Increase by pressing the back
2. Decrease by pressing the back
1+2. Cutting off/Restoring of the
sound
Search/Selection by pressing
3. Higher radio frequency - CD/CD
changer: next track
4. Lower radio frequency - CD/CD
changer: previous track Sound sources
5.
Change of sound source
Selection of stations/CD changer
CD by rotation
6. Higher stored station - Next CD
7. Lower stored station - Previous
CD
This allows you direct and easy ac-
cess to most of the audio functions
which are also available on the audio
equipment control panel.

Audio equipment and telematics42 -
28-02-2005
43Audio equipment and telematics-
28-02-2005
General functions
On/off
Press the button to
switch the set on or
off.
The RD4 audio equip-
ment can operate for approximately
30 minutes without the vehicle's igni-
tion being switched on, under normal
conditions of use and maintenance
of the battery.
Adjusting the volume
Turn the button clockwise to increase
the audio equipment volume or anti-
clockwise to decrease it.
Audio settings
Press the ¯ but-
ton several times to
access the musical
ambience, automatic
volume correction,
left/right sound distribution, rear/front
sound distribution, loudness, treble
and bass setting windows.
Exit from audio mode is by pressing
the "ESC" button or is automatic after
a few seconds without pressing any
button.
The bass, treble, loudness and mu-
sical ambience settings are speciic
to each source. It is possible to set
them differently for the AM radio, FM
radio, CD, CD changer or auxiliary
equipment. Musical ambience
This function permits the selection of
a musical ambience: "None", "Classi-
cal", "Jazz-Blues", "Pop-Rock", "Vo-
cal" or "Techno".
Press the
7 and 8 navigator
buttons to select the ambience re-
quired.
Adjusting the bass
When "Bass" is displayed, press the 7 and 8 navigator buttons to vary
the setting.
- "-9" for a minimum bass setting,
- mid-way for a normal setting,
- "+9" for a maximum bass setting.
Adjusting the treble
When "Treble" is displayed, press
the 7 and 8 navigator buttons to
vary the setting.
- "-9" for a minimum treble setting,
- mid-way for a normal setting,
- "+9" for a maximum treble setting. Adjusting the loudness
The loudness automatically empha-
sises bass and treble tones.
Press the
7 and 8 navigator but-
tons to switch the function on or off.
Adjusting the front/rear sound
distribution
When "Rear - Front Balance" is dis-
played, press the navigator buttons.
Button 8 increases the volume at
the front.
Button 7 increases the volume at
the rear.
Adjusting the right/left sound
distribution
When "Left - Right Balance" is dis-
played, press the navigator buttons.
Button 8 increases the volume on
the right-hand side.
Button 7 increases the volume on
the left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press the 7 and 8 navigator but-
tons to switch the function on or off.

Audio equipment and telematics44 -
28-02-2005
45Audio equipment and telematics-
28-02-2005
Radio
Notes on radio reception
The quality of the audio reception is
subject to external phenomena, due
to the nature of the signals and the
way in which they are transmitted.
Both AM and FM reception are sub-
ject to various forms of interference.
This is no relection on the quality of
the equipment.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
mitter, delection of the signals by
obstacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.Selecting radio mode
Press the "SOURCE"
button several times
until the radio source
is obtained.
Selecting a waveband Press the "BAND
AST" button briely
to select wavebands
FM1, FM2, FMast and
AM.
The stored stations
for each waveband are displayed. Automatic station search
Briely press button
8 or 7 to search
for the station immediately above or
below.
The search stops at the irst station
found.
Searching for a station occurs irst in
"LO" sensitivity (selection of the most
powerful transmitters), then in "DX"
sensitivity (selection of the weakest
and most distant transmitters).
Manual station search
Briely press button 5 or 6 to de-
crease or increase the frequency
displayed.
By continuing to press the button
in the direction selected, you will
obtain continuous scrolling of the
frequency.
The scrolling stops as soon as the
button is released.

Audio equipment and telematics44 -
28-02-2005
45Audio equipment and telematics-
28-02-2005
Manual storing of stations in the
memory
Select the station required.
Press one of the buttons "1" to "6" for
more than one second.
The sound stops then becomes audi-
ble again, conirming that the station
has been stored in the memory.
Automatic storing of FM stations
in the memory (autostore)For greater listening
pleasure, it is prefer-
able to activate the
RDS function.
Press the "BAND
AST" button for more
than one second.
Your radio automatically stores the
6 stations with the strongest signal in
FM. These stations are stored in the
FMast waveband.
If it is not possible to ind 6 stations,
the remaining memories are empty. Recalling stations stored in the
memory
For each waveband, briely press
one of the buttons "1" to "6" to select
the corresponding station.
A superimposed display listing the
stored stations appears, the station
selected being identiied.
Displaying the stations available
You can display
the list of stations
received locally by
pressing the "LIST
REFRESH" button.
This list can include
up to 30 stations.
To update this list during your jour-
ney, press the "LIST REFRESH" but-
ton for more than one second.
To search for an available station:
- press the "LIST REFRESH" button,
- when the list of available stations is displayed, press button 5 or 6
to select a station, then conirm the
selection using the "OK" button.
Note: stations which permit the
broadcasting of trafic information
are indicated by the display TA. Trafic information programme
(TA)
Press the "TA/PTY"
button to switch the
function on or off.
The multifunction dis-
play will show:
- TA if the function is selected, - TA crossed out if the function is se-
lected but not available.
Any trafic information lash will
be given priority, whatever source
you are listening to (radio, CD, CD
changer or auxiliary equipment).
If you wish to interrupt a message,
press the audio equipment "ESC"
or "TA" button to return to the source
which was in use prior to the inter-
ruption.
Note: the trafic information volume
is independent of the normal audio
equipment volume.
You can adjust it, during the broad-
casting of a message, using the
volume dial or the steering wheel
control. The setting is stored and will
be used when the next messages
are broadcast.

Audio equipment and telematics46 -
28-02-2005
47Audio equipment and telematics-
28-02-2005
Search by type of programme
(PTY)
This is a search by type of pro-
gramme, if the coding is activated by
the broadcasting stations.
It allows you to listen to stations
broadcasting a speciic type of pro-
gramme (news, culture, sport, rock,
weather, etc.)."RADIO" menu
Press the "MENU"
button to access the
general menu and
select the "Audio
functions" menu then
"FM waveband pref-
erences" or press the
"OK" button in radio
mode to select the fol-
lowing functions:
- Activate/Deactivate frequency fol- lowing (RDS),
- Activate/Deactivate regional mode (REG),
- Activate/Deactivate displaying of the radio text (RDTXT).
Press the "TA/PTY"
button to access this
function. To search for a type of PTY pro-
gramme:
- press the "TA/PTY" but-ton,
- press button 5 or 6 to
scroll down the list of
the various types of pro-
grammes offered, then
conirm the selection
using the "OK" button.
The list of stations is available after a period
during which the FM
waveband is searched.
- when the list of stations corre- sponding to the type of programme
is displayed, press button 5 or 6
to select a station, then conirm the
selection using the "OK" button.
To switch the PTY function off, select
"Deactivate PTY" from the list of the
various types of programme offered.
EON system
This system connects stations which
are part of the same network. It
enables the broadcasting of TA trafic
information by a station that is part
of the same network as the station to
which you are listening.
This service is available when you
have selected the TA trafic informa-
tion programme.

Audio equipment and telematics46 -
28-02-2005
47Audio equipment and telematics-
28-02-2005
RDSRegional following mode (REG)
When they are part of a network, cer-
tain stations broadcast regional pro-
grammes in the various areas which
they serve. The regional following
mode enables you to continue listen-
ing to the same programme.
To access the function, press the
"MENU" button, select the "Audio
functions" menu then "FM waveband
preferences" or press the "OK" but-
ton in radio mode.
The "RADIO" contextual menu ap-
pears.
Select "Activate regional mode
(REG)" or "Deactivate regional mode
(REG)" depending on the status
of the function on the multifunction
display.
The multifunction display will show:
- REG if the function is selected,
- REG crossed out if the function is
selected but not available.
Using the RDS (Radio Data
System) function on FM
The RDS allows you to continue lis-
tening to the same station whatever
frequency it is using in the region
you are going through. The display
indicates the name of the station
selected.
However, poor coverage of the net-
work or particular environmental
conditions may interfere with the
transmission.
The radio is continually searching for
the transmitter which is transmitting
the same programme with the best
reception.
To access the function, press the
"MENU" button, select the "Audio
functions" menu then "FM waveband
preferences" or press the "OK" but-
ton in radio mode.
The "RADIO" contextual menu ap-
pears.
Select "Activate frequency following
(RDS)" or "Deactivate frequency
following (RDS)" depending on the
status of the function on the multi-
function display.
The multifunction display will show:
- RDS if the function is selected,
- RDS crossed out if the function is
selected but not available.