Peugeot 307 SW Dag 2005 Manual Online

76 -
28-02-2005
77
-
28-02-2005
GPS details Selecting a destination stored in
the directory Selection of one of the previous
destinations
The most recent destinations are
shown.
There are three possible methods
of deining the location to which you
wish to travel:
- accept the last details input by
means of the "OK" function,
- input the details of your destination,
- automatically input the details of your current location by means of
the "Curr. loc." function. Select the
''Directory'' function to
access the ile in which the address
you are looking for is archived.
Select a description by scrolling down
the list by means of the navigator, then
conirm by pressing the navigator. The
directory ile is then displayed.
Select the "OK" function, then press
the navigator to access the guidance
activation function.
Follow the directions given by the
system. Select the
"Previous destinations"
function to access one of the last
twenty addresses stored.
Select a description by scrolling
down the list by means of the navi-
gator, then conirm it by pressing the
navigator. The complete address is
then displayed.
Select the "OK" function, then press
the navigator to access the guidance
activation function.
Follow the instructions given by
the system.
Audio equipment and telematics

76 -
28-02-2005
77
-
28-02-2005
Changing the initial route Guidance options
Activate the function
''Divert route'',
then input the distance involved in
the change required.
Select the ''OK'' function then vali-
date by pressing the navigator.
The system calculates the change
which is closest to the value input
and gives you the option of whether
or not to use this change. The menu
''Guidance options'' pro-
vides access to the following functions:
- changing of the route calculation criteria,
- voice synthesis adjustment of guid- ance messages,
- description of the information relat- ing to the navigation CD-Rom,
-
management of the addresses stored
in the directory.
Calculation criteria
The last criterion used is displayed.
Select a criterion from the list, then
validate by pressing the navigator.
When the criterion of your choice
has been selected, select the "OK"
function then conirm by pressing the
navigator.
Adjusting the voice synthesiser
Select the type of voice "male" or
"female" , after inserting the conigu-
ration CD-Rom.
Adjust the volume of the voice syn-
thesis by turning the navigator, then
validate by pressing the navigator.
Note: the volume can also be ad-
justed during a message, using the
audio/telephone button or the steer-
ing wheel control.
Details of the route
You can consult or change the destina-
tion address at any time by activating
the
"Chosen destination" function on
the "Navigation - Guidance" menu.
Audio equipment and telematics

78 -
28-02-2005
79
-
28-02-2005
Management of the directory
This function enables you to rename
an address stored in the directory.
Select the description correspond-
ing to the stored address to be
changed.
Select the
"Rename" function, then
conirm by pressing the navigator.
Select the "OK" function, then con-
irm by pressing the navigator to
record the changes made.
Stopping/Resuming guidance
- "Stop guidance"
• During guidance, select this
function then validate.
- "Resume guidance" • In the absence of guidance,
select this function then validate
to activate guidance to the last
destination programmed.
Note: after re-starting the engine,
a screen appears enabling you to
resume the guidance activated be-
fore the ignition was switched off. "Navigation - Guidance"
contextual menu
TMC (Trafic Message Channel)
RDS Trafic Information
The RT3 GPS audio/telephone per-
mits access to the TMC RDS trafic
information, broadcast free on the
FM waveband.
This function enables you to re-
ceive messages regarding the trafic
conditions (accidents, trafic jams,
weather, ...).
They may appear temporarily as a
superimposed display or be read by
the voice synthesiser, if it is active.
The contextual menu associated with
the
"Navigation - Guidance" applica-
tion appears as a superimposed display,
when this is the application currently in
use in the main screen window.
This menu is limited to the following
functions:
- changing of the initial route,
- switching to "Selection-Movement on map" mode*,
- storing of the current location (post- al address if available or, if it is not,
the GPS co-ordinates),
- changing of the route calculation criteria,
- stopping or resuming of guidance (displaying of the message which
changes depending on the previ-
ous status),
- displaying of the map, full screen or reduced size on the right (display-
ing of the message which varies
depending on the previous status)*.
* DT colour screen only.
Audio equipment and telematics

78 -
28-02-2005
79
-
28-02-2005
You can read the messages trans-
mitted by the TMC station, while
listening to another station*.
In map mode
**, special TMC sym-
bols are displayed depending on
the type of information.
Select the "TMC Trafic Informa-
tion" function on the "Telematics"
menu, you can choose:
- "Consult the messages" to display the list of TMC messages available,
- "Filter the TMC information" to se- lect one or more types of message
and initialise the TMC station,
- "Voice synthesiser" to listen to the TMC messages received,
- "Activate/Deactivate trafic infor-mation" to display or not display
the TMC messages received.
Initialising the TMC station
To initialise this function, you must
select an FM station which can trans-
mit these messages.
Select the "Choice of the TMC sta-
tion" function from the "Trafic Infor-
mation TMC" menu, one of the follow-
ing will then appear on the screen:
- the name of the station that you are currently listening to,
- "No TMC station available" if no station has been selected or if the
station selected does not transmit
TMC messages,
- "Searching" if you have activated the search for the next station. Filtering the TMC messages General notes on the "Map"
application*
The "Map" application has three dis-
play modes:
- one "Vehicle following on map"
mode, representing active guid-
ance on the map on the right and
a large-scale view of the next inter-
section on the left,
-
two "Selection-Movement on map"
modes, representing consultation of
the map at full screen size or reduced
size on the right with a compass on
the left.
To switch from one mode to the oth-
er, press the navigator briely, then
select the "Move the map" or "Exit
the map mode" function.
You can see symbols, representing
the various types of services which
exist, sorted by category:
- "Administration and safety" symbol on a grey background,
- "Hotels, bars and restaurants" sym- bol on a yellow background,
- "Other businesses" symbol on a purple background,
- "Culture, tourism and entertain- ment" symbol on a white back-
ground,
- "Sports centres and open air centres" symbol on a green back-
ground,
- "Transportation and automobiles" symbol on a blue background.
To ilter these messages, select the
"Filter the TMC information"
func-
tion from the "Trafic Information
TMC" menu, you then obtain:
- "Route information ilter" to obtain the messages relating to the cur-
rent guidance outline,
- "Filter by event" to display the mes- sages speciic only to accidents, or
trafic jams, ...,
- "Geographic ilter" to take into ac- count the messages within a radius
of action to be deined around the
vehicle and/or a location.
You can ilter these messages using
one or more ilters simultaneously.
* Only with DT colour screen.
Audio equipment and telematics

80 -
28-02-2005
81
-
28-02-2005
"Vehicle following on map" mode
This mode permits:
- displaying of the vehicle on the
map with the route proposed by the
navigation if the guidance is active,
- zooming in on the map in accord- ance with the thirteen preset levels,
- displaying of the "Navigation -
Guidance" contextual menu. Map
From the
general menu , the main
"Map" menu offers various options
for guidance management:
- switching to "Selection-Movement on map" mode,
-
direction of the map towards the North
or in the direction of the vehicle,
- recentering of the map around the vehicle,
- opening of the services selection window visible on the map, such as
hotels, service stations, etc.
- displaying of the window for enter- ing the description for recording the
current position of the vehicle in a
directory ile.
A
"Zoom" function enables you to
enlarge the map, in accordance with
the thirteen preset levels relating to
the following scales:
- 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
- 1 km/cm, 2 km/cm, 5 km/cm,
- 10 km/cm, 20 km/cm, 50 km/cm,
- 100 km/cm, 200 km/cm.
This is achieved by turning the navi-
gator.
Audio equipment and telematics

80 -
28-02-2005
81
-
28-02-2005
"Selection-Movement on map"
modes
These modes permit:
- selection of any point on the map
to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS coordinates),
- movement on the map by means of the four directional arrows, rep-
resenting the four cardinal points
(North, East, South, West),
- zooming in on the map in accord- ance with the thirteen preset levels,
- displaying of the "Map" contextual
menu. "Map" contextual menu
The contextual menu associated
with the
"Map" application and with
the "Selection-Movement on map"
mode appears as a superimposed
display, when these are in use in the
main screen window.
This menu is limited to the following
functions:
- displaying of the information on the location selected on the map,
- selection of a location on the map as a destination,
- storing of the location selected (postal address if available or, if it is
not, GPS co-ordinates, so that they
can be recorded in a directory ile),
- switching to "Vehicle following on map" mode.
Audio equipment and telematics

Comfort82 -
28-02-2005
83Comfort-
28-02-2005

Comfort82 -
28-02-2005
83Comfort-
28-02-2005
VENTILATION
1. Windscreen de-icing or
demisting vents.
2. Front window de-icing or
demisting vents.
3. Side vents.
4. Centre vents.
5. Air outlet to front footwells.
6. Air outlet to rear footwells.
Advice on operation
F If, when the vehicle has been
parked in the sun for a long time,
the interior temperature remains
very high, do not hesitate to ven-
tilate the passenger compartment
for a few minutes.
Place the air low control at a level suficient to ensure a good
renewal of air in the passenger
compartment.
When the air low control is in position 0 (deactivation of the
system), temperature related
comfort is no longer guaranteed
but a slight low of air, due to the
movement of the vehicle, can still
be felt.
F For perfectly even air distribution,
take care not to obstruct the exte-
rior air intake grilles, the vents and
the air ducts under the front seats,
as well as the air extractor located
in the boot.
Check that the passenger com- partment ilter is in good condition.

Comfort84 -
28-02-2005
85Comfort-
28-02-2005
AIR CONDITIONING
The air conditioning only operates
when the engine is running.2. Temperature adjustment
1. Air conditioning On/Off
Turn the control from blue
(cold) to red (warm) to ad-
just the temperature to your
requirements.4. Air distribution adjustment
Windscreen and side
windows.
Windscreen, side windows
and footwells.
Footwells.
(vents closed)
The air conditioning is
designed to operate ef-
fectively in all seasons,
with the windows closed.
In summer, it enables the
temperature to be lowered and in
winter, above 0 °C, it increases the
effectiveness of the demisting.
Press the switch, the indicator light
comes on.
The air conditioning does not op-
erate while the air low adjustment
control 3 is in position "0". Centre and side vents.
3. Air low adjustment
Turn the control from posi-
tion 1 to position 4 to obtain
an air low suficient to en-
sure your comfort. To quickly de-ice or demist the wind-
screen and side windows:
- Place the temperature
2 and air
low 3 controls to maximum,
- Close the centre vents,
- Switch air intake button 5 to the
"Outside Air Intake" position (but-
ton 5 indicator light off),
- Start the air conditioning by press- ing button 1.
The air distribution can be adjusted
by placing the control in an interme-
diate position, marked "l ".

Comfort84 -
28-02-2005
85Comfort-
28-02-2005
6. Demisting the rear screen and the mirrors
Pressing the button once
demists the rear screen
and the exterior mirrors.
This switches off automati-
cally to prevent an exces-
sive consumption of current.
Pressing again reactivates demisting.
It is possible to stop demisting before
it is switched off automatically by
pressing the button again. Operate the air conditioning
system for 5 to 10 minutes,
once or twice a month, to
keep it in perfect working
order.
In order to ensure that the air con-
ditioning system operates correctly,
regular checks are also recom-
mended.
If the system does not produce
cold air, do not use it and contact a
PEUGEOT dealer.
It is quite normal that the condensa-
tion created by the air conditioning
results in a low of water under the
vehicle when it is stationary.
5. Air intake/Air recirculation
Pressing button 5 permits
recirculation of the interior
air. This is indicated by il-
lumination of the indicator
light.
As soon as possible, press button 5
again to permit the intake of outside
air, to prevent deterioration of the
air quality. This is indicated by the
switching off of the indicator light.
The interior air recirculation enables
you to isolate the passenger com-
partment from exterior odours and
smoke.
The outside air intake enables you to
prevent and eliminate misting of the
windscreen and side windows.
Used simultaneously with the air
conditioning, air recirculation ena-
bles performance to be improved.
Used in a humid climate, air recir-
culation may result in misting of the
windows.