Peugeot 308 2007.5 Service Manual

43
Warnings log
This summarises the active warning messages, displaying them in succes-sion on the multifunction display.
"Vehicle diagnostics" menu
 Press the "MENU" button to gain ac-cess to the general menu.
 Turn the navigator and press it to select the "Vehicle diagnostics"menu.
 On the "Vehicle diagnostics"menu, select one of the following ap-plications:
Status of the functions
This summarises the active or inactive status of the functions present on the vehicle.

44
TRIP COMPUTER
 Press the button, located at the end of the wipers stalk, to display the various items of trip computer data in succession.
The trip computer data is the following:
System which provides current infor-mation concerning the route travelled (range, consumption, ...).
 Press the control for more than two seconds to reset the distance trav-elled, the average consumption and the average speed to zero.
Monochrome screen A
Zero reset
Data displaysData displays
- the range,
- the current consumption,- the current consumption,
- the distance travelled,
- the average consumption,
- the average speed.
 The next press then returns you to the normal display.

!
i
i
46
A few definitions…
When the range falls below 20 miles (30 km), dashes are displayed. After fill-ing with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).
Range
(km or miles)
This indicates the distance which can still be travelled with the fuel remaining in the tank in relation to the average consumption over the last few miles (kilometres) trav-elled.
Current consumption
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed during the last few seconds.
Average consumption
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed since the last trip computer zero re-set.
Distance travelled
(km or miles)
This indicates the distance travelled since the last trip computer zero reset.
Average speed
(km/h or mph)
This is the average speed cal-culated since the last trip com-puter zero reset (ignition on).
Distance remaining to destination
(km or miles)
This is the distance remaining to be travelled to the final destination. It is either calculated instantly by the navi-gation system, if guidance is activated, or entered by the user.
If the distance is not entered, dashes are displayed in place of the digits.

i
45
- the current information tab with:• the range,• the current consump-tion,• the distance remaining to be travelled,
Route zero reset
Monochrome screen C and colour screen C
 Press the button, located at the end of the wipers stalk, to display the various trip computer tabs in succes-sion:
Data displays
 When the route required is displayed, press the control for more than two seconds.- the route "1" tab with:• the distance travelled,• the average consumption,• the average speed,for the first route.
- the route "2" tab with:• the distance travelled,• the average consump-tion,• the average speed,for the second route.
Routes "1" and "2" are independent but their use is identical.
Route "1" permits, for example, daily calculations, and route "2" monthly cal-culations.
TRIP COMPUTER
System which provides current infor-mation concerning the route travelled (range, consumption, …).
Instrument panel large display
 Pressing the button again returns you to the normal display.

!
i
i
46
A few definitions…
When the range falls below 20 miles (30 km), dashes are displayed. After fill-ing with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).
Range
(km or miles)
This indicates the distance which can still be travelled with the fuel remaining in the tank in relation to the average consumption over the last few miles (kilometres) trav-elled.
Current consumption
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed during the last few seconds.
Average consumption
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed since the last trip computer zero re-set.
Distance travelled
(km or miles)
This indicates the distance travelled since the last trip computer zero reset.
Average speed
(km/h or mph)
This is the average speed cal-culated since the last trip com-puter zero reset (ignition on).
Distance remaining to destination
(km or miles)
This is the distance remaining to be travelled to the final destination. It is either calculated instantly by the navi-gation system, if guidance is activated, or entered by the user.
If the distance is not entered, dashes are displayed in place of the digits.

47
VENTILATION
System which creates and maintains comfortable conditions in the vehicle’s passenger compartment.
Air treatment
The incoming air follows various routes depending on the controls selected by the driver:
- direct arrival in the passenger com-partment (air intake),- passage through a heating circuit (heating),- passage through a cooling circuit (air conditioning).The temperature control enables you to obtain the level of comfort required by mixing the air of the various circuits.
The air distribution control enables you to diffuse the air in the passenger com-partment combining several air vents.
The air flow control enables you to increase or reduce the speed of the ventilation blower.
Air intake
The air circulating in the passenger com-partment is filtered and originates either from the outside via the grille located at the base of the windscreen or from the inside in air recirculation mode.
Control panel
The controls of this system are grouped together on control panel A on the cen-tre console. Depending on the model, the functions offered are:
- the level of comfort required,- the air flow,- the air distribution,- the de-icing and demisting,- the manual or automatic air conditioning controls.
Air diffusion
1. Windscreen de-icing or demisting vents.
2. Front side window de-icing or demisting vents.
3. Side adjustable and closing vents.
4. Central adjustable and closing vents.
5. Air outlets to the front footwells.
6. Adjustable and closing vents for the rear passengers.
7. Air outlets to the rear footwells.

i
48
RECOMMENDATIONS FOR VENTILATION AND AIR
CONDITIONING

i
49
2. Air flow adjustment
 Turn the dial from position 1 to position 5 to obtain a comfortable air flow.
Windscreen, side windows and footwells.
Footwells.(vents closed)
Central and side vents.
 Turn the dial from blue (cold) to red (hot) to adjust the temperature to your re-quirements.
Windscreen and side windows.
1. Temperature adjustment
The air distribution can be adapted by placing the dial in an intermediate position.
The heating/ventilation or air conditioning systems can only operate with the engine running.
4. Air intake/Air recirculation
The intake of exterior air prevents misting of the windscreen and side windows.
The recirculation of interior air insulates the passenger compartment from exte-rior odours and smoke.
Return to exterior air intake as soon as possible to prevent deterioration of the the air quality and avoid misting.
3. Air distribution adjustment
 Press the button to recir-culate the interior air. The indicator light comes on to confirm this.
 Press the button again to permit the intake of exterior air. The indicator light switches off to confirm this.
HEATING/VENTILATION
MANUAL AIR CONDITIONING

i
50
De-icing - Demisting
To quickly de-ice or demist the wind-screen and side windows:
 place the air intake control 4 in the "Exterior air intake" position,
 place the air distribution dial 3 in the "Windscreen position",
 place the temperature 1 and air flow 2 dials at maximum,
 close the central vents,
The control button is located on the heating or air conditioning system control panel.
REAR SCREEN DE-ICING
Switching on
The rear screen de-icing can only oper-ate when the engine is running.
 Press this button to de-ice the rear screen and the exterior mirrors. The indicator light associated with the button comes on.
Switching off
The de-icing switches off automatically to prevent an excessive consumption of current.
 It is possible to stop the de-icing operation before it is switched off automatically by pressing the button again. The indicator light associated with the button switches off.
5. Air conditioning On/Off
The air conditioning is de-signed to operate effectively in all seasons, with the windows closed.
It enables you to:
- lower the temperature, in summer,- increase the effectiveness of the demisting in winter, above 0 °C.
Switching on
 Press the "A/C" button, the associ-ated indicator light comes on.
The air conditioning does not op-erate when the air flow adjustment control 2 is in position "0".
Switching off
 Press the "A/C" button again, the as-sociated indicator light switches off.
 above 0 °C, switch on the air condi-tioning by pressing the "A/C" button.

i
50
De-icing - Demisting
To quickly de-ice or demist the wind-screen and side windows:
 place the air intake control 4 in the "Exterior air intake" position,
 place the air distribution dial 3 in the "Windscreen position",
 place the temperature 1 and air flow 2 dials at maximum,
 close the central vents,
The control button is located on the heating or air conditioning system control panel.
REAR SCREEN DE-ICING
Switching on
The rear screen de-icing can only oper-ate when the engine is running.
 Press this button to de-ice the rear screen and the exterior mirrors. The indicator light associated with the button comes on.
Switching off
The de-icing switches off automatically to prevent an excessive consumption of current.
 It is possible to stop the de-icing operation before it is switched off automatically by pressing the button again. The indicator light associated with the button switches off.
5. Air conditioning On/Off
The air conditioning is de-signed to operate effectively in all seasons, with the windows closed.
It enables you to:
- lower the temperature, in summer,- increase the effectiveness of the demisting in winter, above 0 °C.
Switching on
 Press the "A/C" button, the associ-ated indicator light comes on.
The air conditioning does not op-erate when the air flow adjustment control 2 is in position "0".
Switching off
 Press the "A/C" button again, the as-sociated indicator light switches off.
 above 0 °C, switch on the air condi-tioning by pressing the "A/C" button.