Peugeot 308 2007.5 Workshop Manual

ii
51
The air conditioning only operates when the engine is running.
The driver and his front pas-senger can each adjust the temperature to their require-ments.
 Turn control 2 or 3 to the left or to the right respectively to decrease or increase this value.
A setting around the value 21provides optimum comfort. However, depend-ing on your requirements, a setting be-tween 18 and 24 is normal.
You are advised to avoid a left/right set-ting difference of more than 3.
4. Automatic visibility programme
The automatic comfort pro-gramme may not be sufficient to quickly demist or de-ice the windscreen and side windows (humidity, several passen-gers, ice, etc.).
 In this case, select the automatic vis-ibility programme.
The system automatically controls the air conditioning, the air flow and the air intake and provides optimum distribu-tion of the ventilation to the windscreen and side windows.
Automatic operation
1. Automatic comfort programme
 Press the "AUTO" button. The indicator light on the button comes on.
2. Driver’s side adjustment
3. Passenger side adjustment
DUAL ZONE AUTOMATIC AIR
CONDITIONING
We recommend the use of this mode: it permits automatic and optimised ad-justment of all of the functions, passen-ger compartment temperature, air flow, air distribution and air recirculation, in accordance with the comfort value that you have chosen.
This system is designed to operate ef-fectively in all seasons, with the win-dows closed.
The value indicated on the display corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit.
 To switch it off, press the "visibility" button again or press the "AUTO"button, the indicator light on the but-ton switches off and the indicator light on the "AUTO" button comes on.

!
!
i
52
Manual operation
If you wish, you can make a different choice from that offered by the system by changing a setting. The other func-tions will still be controlled automati-cally.
 Pressing the "AUTO" button returns the system to completely automatic operation.
 Press this button to switch off the air conditioning.
6. Air distribution adjustment
 Press one or more buttons to direct the air flow to-wards:
7. Air flow adjustment
 Turn this control to the left to decrease the air flow or to the right to increase the air flow.
8. Air intake/Air recirculation
Switching the system off
 Turn the air flow control to the left until all of the indicator lights switch off.
This action switches off all of the func-tions of the system.
Temperature related comfort is no lon-ger guaranteed but a slight flow of air, due to the movement of the vehicle, can still be felt.
 Turn the air flow dial to the right or press the "AUTO" button to reacti-vate the system with the values set before it was switched off.
 Press this button for recir-culation of the interior air. The indicator light on the button comes on.
5. Air conditioning On/Off
- the windscreen and side windows (de-icing or demisting),- the windscreen, the side windows and the vents,- the windscreen, the side windows, the vents and the footwells,- the vents and the footwells,- the vents,- the footwells,- the windscreen, the side windows and the footwells.
The air flow indicator lights, between the two fans, come on progressively in relation to the value requested.
 As soon as possible, press this but-ton again to permit the intake of outside air and prevent condensa-tion. The indicator light on the button switches off.
9. Mono zone/Dual zone
Press this button to equalise the comfort value on the passenger side with that on the driver's side (mono zone). The indicator light on the button comes on.
Air recirculation enables the passenger compartment to be isolated from exte-rior odours and smoke.
Switching the system off could result in discomfort (humidity, condensation).
 Press this button again to return to automatic operation of the air con-ditioning. The indicator light on the "A/C" button comes on.

!
i
i
53
FRAGRANCE DIFFUSER
System permitting the diffusion of a fra-grance in the passenger compartment in accordance with your requirements, by means of the adjustment dial and the various fragrance cartridges available.
Fitting the cartridge
Remove the cartridge from the sealing case.
 Install the cartridge in the fascia (flower at top right).
 Press the dial and turn it a quarter of a turn to the right.
Adjustment dial
This dial permits adjustment of the in-tensity of diffusion of the fragrance.
 Turn the dial to the right to permit diffusion of the fragrance (horizontal position).
 Turn the dial to the left to stop diffu-sion of the fragrance (vertical posi-tion).
Fragrance cartridge
This cartridge can be removed easily.
You can change it at any time and store it in the sealed case which keeps it closed once it has been opened.
You can obtain different fragrance cartridges from PEUGEOT dealers.
Removing the cartridge
 Turn the dial a quarter of a turn fully to the left.
Remove the cartridge from the fascia.
 Refit its sealing case.

54
FRONT SEATS
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.
Forwards-backwards adjustment
 Raise the control and slide the seat forwards or backwards.
Driver’s or passenger’s seat height adjustment
 Pull the control upwards to raise or push it downwards to lower, as many times as necessary, to obtain the po-sition required.
Seat back angle adjustment
 Push the control rearwards.
Manual adjustments

i
55
FRONT SEATS
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.
Forwards-backwards adjustment
 Push the control forwards or rear-wards to slide the seat.
Seat cushion height and angle adjustment
 Tilt the rear part of the control up-wards or downwards to obtain the required height.
 Tilt the front part of the control up-wards or downwards to obtain the required angle.
Seat back angle adjustment
 Tilt the control forwards or rearwards to adjust the angle of the seat back.
Driver’s seat electric adjustments

!
!
56
Access to the rear seats (3-door)
Pull the control upwards to fold the seat back and move the seat forward.
When put back in place, the seat re-turns to its initial position.
Head restraint height and angle adjustment
 To raise the head restraint, pull it forwards and upwards at the same time.
 To remove the head restraint, press the lug A and pull the head restraint upwards.
 To put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back.
 To lower the head restraint, press the lug A and the head restraint at the same time.
 To adjust the angle of the head re-straint, tilt its lower part forwards or rearwards.
Lumbar adjustment
 Turn the dial to obtain the correct lumbar position.
Additional adjustments
 Lower the support B incorporated in the control to rest the seat belt on it. It enables you to retrieve the seat belt more easily when you need to put it back on.

i
!
57
Storing driving positions
System which takes into account the electrical settings of the driver’s seat and exterior mirrors. It enables you to store up to two positions using the but-tons on the side of the driver’s seat and two further driving positions using the two remote control keys.
Recalling a stored position
When the vehicle is unlocked, the driver’s seat and the exterior mirrors re-turn to the position stored by the remote control key.
Storing a position
Using buttons M/1/2
 Switch on the ignition.
 Adjust your seat and your exterior mirrors.
 Press button M, then press button 1or 2 within four seconds.
An audible signal is heard indicating that the storing has been taken into account.
Using the remote control keys
When the vehicle is locked, the remote control key stores the position of the driver’s seat and exterior mirrors.
Each remote control key can store one specific setting.
Ignition on
 Briefly press button 1 or 2 to recall the corresponding position.
An audible signal is heard indicating the end of the adjustment.
Vehicle moving
Press and hold button 1 or 2 until the audible signal is heard indicating the end of the adjustment.

!
58
REAR SEATS
Bench seat the left-hand (2/3) or right-hand (1/3) section of which can be folded to adapt the boot load space.
Rear head restraints
These have a high position (comfort and safety) and a low position (rear visibility).
They can also be removed; to remove them:
 pull the head restraint fully forwards and upwards at the same time,
 then, press the lug A.
Removing the seat cushion
 Move the corresponding front seat forwards.
 Pull the handle 1 forwards to raise the seat cushion 2.
 Tilt the seat cushion 2 fully against the front seat.
 Remove the seat cushion 2 from its fixings by pulling upwards.
Refitting the seat cushion
 Position the seat cushion 2 vertically in its fixings.
 Fold down the seat cushion 2.
 Press on the seat cushion to secure it.

!
i
59
Folding the seat
In order to fold a rear seat without any risk of damage, always start with the seat cushion, never with the seat back:
 move the corresponding front seat forwards if necessary,
 pull the handle 1 forwards to raise the seat cushion 2,
 tilt the seat cushion 2 fully against the front seat,
Returning the seat back to its original position
When returning the rear seat back to its original position:
 put the seat back 4 in the upright position and secure it,
 fold the seat cushion 2,
 put the head restraints back in place.
 check that the seat belt is positioned correctly on the side of the seat back,
 remove the head restraints,
 pull the control 3 forwards to release the seat back 4,
 tilt the seat back 4.

!
i
i
60
MIRRORS
Exterior mirrors
Each fitted with an adjustable mirror permitting the lateral rearward vision necessary for overtaking or parking. They can also be folded for parking in confined spaces.
Folding
 from outside; lock the vehicle using the remote control or the key.
 from inside; with the ignition on, pull control A rearwards.
Adjustment
Unfolding
 from outside; unlock the vehicle us-ing the remote control or the key.
 from inside; with the ignition on, pull control A rearwards.
 Move control A to the right or to the left to select the corresponding mirror.
 Move control B in all four directions to adjust.
Return control A to the central position.