bonnet PEUGEOT 308 CC 2010 Owners Manual

9
i
!
127
CHECKS
BONNET

 Push the exterior safety catch B to
the left and raise the bonnet.

 Unclip the stay C from its housing.

 Fix the stay in the notch to hold the
bonnet open. Closing

 Take the stay out of the support
notch.

 Clip the stay in its housing.

 Lower the bonnet and release it at
the end of its travel.

 Pull on the bonnet to check that it is
secured correctly.
Opening

 Open the front left door.

 Pull the interior bonnet release
lever A , located at the bottom of the
door frame. The location of the interior bonnet
release lever prevents opening of
the bonnet while the front left door
is closed.
When the engine is hot, handle the
exterior safety catch and the bon-
net stay with care (risk of burns).

11
!
i
168
TECHNICAL DATA
IDENTIFICATION MARKINGS
Various visible markings for the identifi -
cation and tracking of your vehicle. Wheels which are fi tted with
225/40 R18 tyres cannot be fi t-
ted with snow chains. For further
information, contact a PEUGEOT
dealer.
If the infl ation pressures are too low,
this increases fuel consumption.
The infl ation pressures must be
checked when the tyres are cold,
at least once a month.

A. Vehicle identifi cation number (VIN)
under the bonnet.
This number is engraved on the bodywork near the damper support.

For access to it, raise the plastic cover.

B. VIN on the windscreen lower cross-
member.
This number is indicated on a self- adhesive label which is visible
through the windscreen.

C. Manufacturer's label.
This number is indicated on a self- destroying label affi xed to the door
aperture, below the door striker, on
the right-hand side.
D. Tyre/paint label.
This label is affi xed to the door aper- ture, on the driver's side.
It bears the following information:
- the tyre infl ation pressures, laden and unladen,
- the wheel rim and tyre sizes,
- the brands of tyre recommended by the manufacturer,
- the infl ation pressure of the spare wheel,
- the paint colour code.