technical data PEUGEOT 308 DAG 2007 Owners Manual

12
!
i
170
TECHNICAL DATA
IDENTIFICATION
FEATURES
Various visible marking elements for the
identifi cation and tracking of your vehi-
cle.Wheels which are fi tted with 225/45
R17 and 225/40 R18 tyres cannot be
fi tted with snow chains. For further
information, contact a PEUGEOT
dealer.
If the infl ation pressure is too low,
this increases fuel consumption.
The infl ation pressure must be
checked when the tyres are cold,
at least once a month.
A. Chassis number under
the bonnet.
This number is etched on the bodywork
near the damper support.
To gain access to it, raise the plastic
cover. B. Chassis number on the
windscreen lower crossmember.
This number is indicated on a gummed
label which is visible through the wind-
screen.
C. Manufacturer’s plate.
This plate is riveted onto the engine
mounting.
or
D. Manufacturer’s label.
This number is indicated on a self-de-
stroying label affi xed to the centre pillar,
on the passenger side. E. Tyre/paint label.
This label is affi xed to the front pillar, on
the driver’s side.
It bears the following information:
- the tyre infl ation pressures with and
without load,
- the wheel rim and tyre sizes,
- the brands of tyre recommended by the manufacturer,
- the infl ation pressure of the spare wheel,
- the paint colour reference.