ESP Peugeot 308 SW BL 2013 User Guide

2
51
MULTIFUNCTION SCREENS

For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.



"Telephone" menu


Display confi guration
Once this menu has been selected, you
can gain access to the following set-
tings:


- brightness-video setting,

- date and time setting,

- choice of units.


Choice of language
Once this menu has been selected,
you can change the language used by
the display (Deutsch, English, Espanol,
Français, Italiano, Nederlands, Portugues,
Portugues-Brasil, Russe, Türkçe * ).
Example: setting of the duration of the
"guide-me-home" lighting


)
Press the " 
" or " 
" buttons, then
the "OK"
button to select the menu
required.


)
Press the " 
" or " 
" buttons,
then the "OK"
button to select the
"Guide-me-home headlamps" line.


)
Press the " 
" or " 
" buttons to set
the value required (15, 30 or 60 sec-
onds), then press the "OK"
button
to confi rm.

)
Press the " 
" or " 
" buttons, then
the "OK"
button to select the "OK"

box and confi rm or press the "ESC"

button to cancel.
With the Peugeot Connect Sound
(RD5) switched on, once this menu has
been selected you can confi gure your
Bluetooth system (pairing), consult the
various telephone directories (calls log,
services...) and manage your communi-
cations (pick up, hang up, call waiting,
secret mode...).
For more information on the "Tele-
phone" application, refer to the Peugeot
Connect Sound (RD5) section.

*
According to country.

2MULTIFUNCTION SCREENS

For operation of the retractable
screen (opening, closing, adjust-
ment of the position, etc.), refer
to the "Access to the retractable
screen" section.



Displays in the screen

Displays according to context:


- time,

- date,

- altitude,

- ambient temperature (the value dis-
played fl ashes if there is a risk of
ice),

- parking sensor information,

- audio functions,

- telephone and contacts information,

- satellite navigation system informa-
tion,

- alert messages,

- menus for settings of the screen,
navigation system and vehicle
equipment.
From the navigation system control
panel, to select one of the applications:


)
press the dedicated "RADIO"
,
"MUSIC"
, "NAV"
, "TRAFFIC"
,
"PHONE"
or "SETUP"
button for
access to the corresponding menu,

)
turn dial A
to select a function, an
item in a list,

)
press button B
to confi rm the selec-
tion,
or

)
press the "ESC"
button to abandon
the current operation and return to
the previous display.
RETRACTABLE COLOUR
SCREEN (WITH PEUGEOT
CONNECT NAVIGATION (RT6))

Controls

For more information on these applica-
tions, refer to the "Audio and Telematics"
section.

2
54
MULTIFUNCTION SCREENS

For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.

RETRACTABLE COLOUR SCREEN (WITH PEUGEOT CONNECT
MEDIA NAVIGATION (NG4 3D))

Displays in the screen

Displays according to context:


- time,

- date,

- altitude,

- ambient temperature (the value dis-
played fl ashes if there is a risk of
ice),

- parking sensor information,

- audio functions,

- telephone and address book infor-
mation,

- satellite navigation system informa-
tion,

- display screen or navigation system
parameter settings menus.
From the Peugeot Connect Media Navi-
gation (NG4 3D) control panel, to select
one of the applications:


)
press the dedicated "RADIO"
, "ME-
DIA"
, "NAV"
, "TRAFFIC"
, "ADDR
BOOK"
or "SETUP"
button for ac-
cess to the corresponding menu,

)
turn dial A
to select a function, an
item in a list,

)
press button B
to confi rm the selec-
tion,
or

)
press the "ESC"
button to abandon
the current operation and return to
the previous display.
For operation of the retractable
screen (opening, closing, adjust-
ment of the position, etc.), refer
to the "Access to the retractable
screen" section.
For more information on these applica-
tions, refer to the Peugeot Connect Media Navigation (NG4 3D) section.


Controls

2
55
MULTIFUNCTION SCREENS

"SETUP" menu


Language and speech
This menu allows you to:


- select the language used by the
display (Deutsch, English, Espanol,
Français, Italiano, Nederlands,
Polski, Portugues, Portugues-Brasil,
Türkçe * ),

- select the voice recognition parame-
ters (activation/deactivation, advice
on use, personal voice program-
ming, etc.),

- set the volume of the voice synthe-
siser.

Date and time
This menu allows you to set the date
and time, the format of the date and the
format of the time.

Principle of GPS (GMT) synchronisation:


1.
Confi rm the selection "Synchronise
with GPS", the time is then aligned
with GMT universal time, the date is
updated as well.

2.
Using the 4-direction navigator, move
the cursor onto the hours fi eld and
press on OK
.

3.
Using the rotating ring, you can then
adjust the time to the time zone of your
choice.
Note that in the case of a summer/win-
ter time change, the time zone must be
set again manually.


Display
This menu allows you to set the bright-
ness of the screen, the screen colour
scheme and the colour of the map (day/
night or auto mode).

Units
This menu allows you to select the
units: temperature (°C or °F) and dis-
tance (miles or km).



)
Press the "SETUP"
button to gain
access to the "SETUP"
menu. This
allows you to select from the follow-
ing functions:


- "Language and speech",

- "Date and time",

- "Display",

- "Units",

- "System".

System
This menu allows you to restore the fac-
tory confi guration, display the software
version and activate scrolling text.

For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.


*
According to country.

2
56
MULTIFUNCTION SCREENS
This screen is opened and stored auto-
matically.
However, you can also open it, store it
and adjust it using the various manual
controls:


- opening or storing by means of con-
trol A
,

- angle adjustments by means of con-
trol B
.
It is also fi tted with safety auto-reverse
protection.

Opening the screen


)
With the screen stored, press con-
trol A
to open it.
The screen opens automatically when
the ignition is switched on, when the au-
dio and telematics system is switched
on, when an outgoing telephone call is
made, when a voice command is given
and when a warning message linked with
the STOP warning lamp is received.
Closing the screen


)
With the screen open, press con-
trol A
to store it.
The screen is stored automatically
when the ignition is switched off, after
approximately three seconds, if the au-
dio and telematics system is off.
If you wish the screen to open or
close automatically when the audio
and telematics system is switched
on or off, the screen must not be
closed when the audio and tele-
matics system is operating. When the screen is open, you can ad-
just it precisely in different ways:


)
press the corresponding part of con-
trol B
to move the screen towards
you or towards the windscreen,
or


)
push or pull the screen gently by
hand.

Adjusting the position of the screen

Safety auto-reverse
If the screen meets an obstacle as it
opens or closes, the movement stops
immediately and is reversed by a few
millimetres.
After clearing the obstacle, issue the
command required again.
Storing the position of the screen
The system has four pre-set positions
in its memory.
Each time the screen is closed, the
system stores the last position of the
screen.
Each time the screen is re-opened, the
system returns the screen to the pre-set
position closest to that stored.
If you close the screen during op-
eration of the audio and telematics
system, it will re-open automatically
when an outgoing telephone call is
made, when a voice command is
given or when a warning message
linked with the STOP warning lamp
is received.


















Access to the retractable screen

3
66
COMFORT
When the engine is cold, to prevent
too great a distribution of cold air,
the air fl ow will reach its optimum
level gradually.
In cold weather, it favours the distri-
bution of warm air to the windscreen,
side windows and footwells only. On entering the vehicle, if the in-
terior temperature is much colder
or warmer than the comfort value,
there is no need to change the val-
ue displayed in order to obtain the
comfort required. The system cor-
rects the difference in temperature
automatically and as quickly as
possible.
The air conditioning only operates when
the engine is running. The driver and front passenger
can each adjust the tempera-
ture to their requirements.


)
Turn control 2
or 3
to the left or to
the right respectively to decrease or
increase this value.
A setting around the value 21 provides
optimum comfort. However, depend-
ing on your requirements, a setting be-
tween 18 and 24 is normal.
You are advised to avoid a left / right
setting difference of more than 3.
4. Automatic visibility programme
The automatic comfort pro-
gramme may not be suffi cient
to quickly demist or defrost the
windscreen and side windows
(humidity, several passengers,
ice, etc.).

Automatic operation



)
Press the "AUTO"
button.
The indicator lamp in the
button comes on.
2. Driver's side adjustment
DUAL-ZONE DIGITAL
AIR CONDITIONING
We recommend the use of this mode:
it permits automatic and optimised ad-
justment of all of the functions, passen-
ger compartment temperature, air fl ow,
air distribution and air recirculation, in
accordance with the comfort value that
you have chosen.
This system is designed to operate ef-
fectively in all seasons, with the windows
closed. The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit.


)
To switch it off, press the "visibility"

button again or press the "AUTO"

button, the indicator lamp in the but-
ton goes off and the indicator lamp
in the "AUTO"
button comes on.


1. Automatic comfort programme
3. Passenger side adjustment


)
In this case, select the automatic
visibility programme.
The system automatically controls the
air conditioning, the air fl ow and the air
intake and provides optimum distribu-
tion of the ventilation to the windscreen
and side windows.






With Stop & Start, when demist-
ing has been activated, the STOP
mode is not available.

3
71
COMFORT












Storing driving positions

System which registers the electrical
settings of the driver's seat and door
mirrors. It enables you to store and re-
call two positions using the buttons on
the side of the driver's seat.

Ignition on or engine running


)
Press button 1
or 2
to recall the cor-
responding position.
An audible signal confi rms that ad-
justment is complete.

Storing a position Storing a new position cancels the
previous position.

Recalling a stored position

Using buttons M / 1 / 2


)
Switch on the ignition.

)
Adjust your seat and the door mirrors.

)
Press button M
, then press button 1

or 2
within four seconds.
An audible signal indicates that the
position has been stored. You can interrupt the current move-
ment by pressing button M
, 1
or 2
or
by using one of the seat controls.
A stored position cannot be re-
called while driving.
Recalling stored positions is deac-
tivated 45 seconds after switching
off the ignition.










Heated seats control
With the engine running, the front seats
can be heated separately.


)
Use the adjustment dial, placed on
the side of each front seat, to switch
on and select the level of heating re-
quired:

0
:
Off.

1
:
Low.

2
:
Medium.

3
:
High.

3
72
COMFORT
REAR SEATS
Never drive with the head restraints
removed; they must be in place
and in the high position when pas-
sengers are seated in the rear.


Rear head restraints

These have a high position (comfort
and safety) and a low position (rear vis-
ibility).
They can also be removed.
To remove a head restraint:


)
pull the head restraint fully forwards
and upwards at the same time,

)
then, press the lug A
.


Removing the seat cushion



)
Move the corresponding front seat
forwards if necessary.

)
Raise the seat cushion 1
lifting it
with a hand from the rear.

)
Tilt the seat cushion 1
fully against
the front seat.

)
Remove the seat cushion 1
from its
fi xings by pulling upwards.



Refitting the seat cushion



)
Position the seat cushion 1
vertically
in its fi xings.

)
Fold down the seat cushion 1
.

)
Press on the seat cushion to secure it.
Bench seat, the left-hand (2/3) or right-
hand (1/3) section of which can be folded
to adapt the boot load space.

3
73
COMFORT

Folding the seat

In order to fold a rear seat without any risk
of damage, always start with the seat
cushion,
never with the seat back:


)
move the corresponding front seat
forwards if necessary,

)
raise the seat cushion 1
lifting it with
a hand from the rear,

)
tilt the seat cushion 1
fully against
the front seat,

Returning the seat back to its
original position
When returning the rear seat back to its
original position:


)
put the seat back 3
in the upright po-
sition and secure it,

)
fold the seat cushion 1
,

)
refi t the head restraints or put them
back in place.
)
check that the seat belt is positioned
correctly on the side of the seat
back,

)
lower or remove the head restraints
if necessary,

)
pull the control 2
forwards to release
the seat back 3
,

)
tilt the seat back 3
.
When returning the rear seat back
to its original position, take care not
to trap the seat belts and ensure
that their buckles are positioned
correctly. The seat cushion 1
can be removed
to increase the loading volume.

3
75
COMFORT

Removal
Installation

Once the seat has been folded, carry
out the following operations:


)
pull the red strap D
to release the
front feet of the seat,

)
lift the seat and carry it using the
carrying handle E
.
Never use the adjustment straps
to remove, install or carry a seat;
use the carrying handle E
provided
for this purpose (weight of the seat:
approximately 18 kg).
Once the seat has been removed,
in order to protect its electronic
systems, it must be stored in a
clean, dry location sheltered from
bad weather. Locked

Released


)
Tilt the folded seat rearwards; the
front and rear feet lock automatically.

)
Pull one of the straps B
to release
the seat back, then raise it.


)
Check that no object is obstructing
the anchorages on the fl oor, so pre-
venting correct locking seat's feet.

)
Carry the seat using the carrying
handle E
.

)
Put the front feet of the seat in place
in the corresponding anchorages.

)
Raise the lever C
to check that the
rear feet are released.