ignition PEUGEOT 4007 2010.5 User Guide
Page 25 of 215
1
INSTRUMENTS and CONTROLS
1. RDS Auto
Correct
:
Activate/deactivate automatic ad- justment.
2. GMT/GMT+1/GMT+2
Select the time zone.
3. Summer Time:
Summer time On/Off.
Press button D t o c o n fi r m a n d r e -
turn to the previous menu.
Press button C to access the "Time"
menu .
You must deactivate automatic
adjustment (RDS Auto Correct)
to change the time zone and
summer time settings.
O n e a c h s c r e e n , y o u c a n r e t u r n
to the previous screen by
pressing button D "Return" .
O n c e t h i s m e n u h a s b e e n s e l e c t e d , y o u
can access the following functions: LIGHTING RHEOSTAT
W i t h t h e l i g h t i n g o n o r o f f , p r e s s t h e
button to change the intensity of the
lighting of the instruments and controls
in "day" or "night" mode.
When the lighting reaches the maximum
s e t t i n g , p r e s s a g a i n t o c h a n g e t o t h e
minimum setting.
W h e n t h e l i g h t i n g r e a c h e s t h e r e q u i r e d
i n t e n s i t y , r e l e a s e t h e b u t t o n .
The setting is saved when the ignition
switch is turned to OFF. An audible signal is heard and
the intensity of the lighting
increases each time the button
is pressed.
System for manual adjustment of the
brightness of the instruments and
controls in relation to the exterior
brightness.
Page 27 of 215
1
INSTRUMENTS and CONTROLS
1. RDS Auto
Correct
:
Activate/deactivate automatic ad- justment.
2. GMT/GMT+1/GMT+2
Select the time zone.
3. Summer Time:
Summer time On/Off.
Press button D t o c o n fi r m a n d r e -
turn to the previous menu.
Press button C to access the "Time"
menu .
You must deactivate automatic
adjustment (RDS Auto Correct)
to change the time zone and
summer time settings.
O n e a c h s c r e e n , y o u c a n r e t u r n
to the previous screen by
pressing button D "Return" .
O n c e t h i s m e n u h a s b e e n s e l e c t e d , y o u
can access the following functions: LIGHTING RHEOSTAT
W i t h t h e l i g h t i n g o n o r o f f , p r e s s t h e
button to change the intensity of the
lighting of the instruments and controls
in "day" or "night" mode.
When the lighting reaches the maximum
s e t t i n g , p r e s s a g a i n t o c h a n g e t o t h e
minimum setting.
W h e n t h e l i g h t i n g r e a c h e s t h e r e q u i r e d
i n t e n s i t y , r e l e a s e t h e b u t t o n .
The setting is saved when the ignition
switch is turned to OFF. An audible signal is heard and
the intensity of the lighting
increases each time the button
is pressed.
System for manual adjustment of the
brightness of the instruments and
controls in relation to the exterior
brightness.
Page 28 of 215
1
INSTRUMENTS and CONTROLS
1. RDS Auto
Correct
:
Activate/deactivate automatic ad- justment.
2. GMT/GMT+1/GMT+2
Select the time zone.
3. Summer Time:
Summer time On/Off.
Press button D t o c o n fi r m a n d r e -
turn to the previous menu.
Press button C to access the "Time"
menu .
You must deactivate automatic
adjustment (RDS Auto Correct)
to change the time zone and
summer time settings.
O n e a c h s c r e e n , y o u c a n r e t u r n
to the previous screen by
pressing button D "Return" .
O n c e t h i s m e n u h a s b e e n s e l e c t e d , y o u
can access the following functions: LIGHTING RHEOSTAT
W i t h t h e l i g h t i n g o n o r o f f , p r e s s t h e
button to change the intensity of the
lighting of the instruments and controls
in "day" or "night" mode.
When the lighting reaches the maximum
s e t t i n g , p r e s s a g a i n t o c h a n g e t o t h e
minimum setting.
W h e n t h e l i g h t i n g r e a c h e s t h e r e q u i r e d
i n t e n s i t y , r e l e a s e t h e b u t t o n .
The setting is saved when the ignition
switch is turned to OFF. An audible signal is heard and
the intensity of the lighting
increases each time the button
is pressed.
System for manual adjustment of the
brightness of the instruments and
controls in relation to the exterior
brightness.
Page 47 of 215
2
COMFORT
DOOR MIRRORS DOOR MIRRORS
Electric folding/unfolding
- from inside, with the ignition switch i n t h e " O N " o r " A C C " p o s i t i o n :
b y p r e s s i n g t h e c o n t r o l C .
- from inside, with the ignition switch i n t h e " L O C K " p o s i t i o n :
b y p r e s s i n g t h e c o n t r o l C, w i t h i n
30 seconds.
- from outside using the remote control:
b y p r e s s i n g t h e " c l o s e d p a d -
l o c k b u t t o n b r i e fl y 3 t i m e s t o f o l d
them,
b y p r e s s i n g t h e " o p e n p a d l o c k "
b u t t o n b r i e fl y 3 t i m e s t o u n f o l d
t h e m .
Adjustment
The mirrors can be adjusted when the
i g n i t i o n s w i t c h i s i n t h e " O N " o r " A C C "
p o s i t i o n .
Move control A to the right or to the left
t o s e l e c t t h e c o r r e s p o n d i n g m i r r o r .
Direct control B in all four directions
t o a d j u s t t h e m i r r o r .
W h e n a d j u s t m e n t i s c o m p l e t e , r e t u r n
control A t o t h e c e n t r a l p o s i t i o n . If you switch the engine off then
re-start it with the mirrors fol-
ded, they will unfold automati-
cally when the vehicle reaches
2 0 m p h ( 3 0 k m / h ) .
If the mirrors have been folded
manually or electrically after
starting the engine, they are not
u n f o l d e d a u t o m a t i c a l l y .
In this case:
Press the control C to unfold
t h e m .
If you have folded the mirrors
using the control
C , you must
use this control to unfold them,
otherwise the mirrors will not be
l o c k i n p l a c e c o r r e c t l y .
The folding and unfolding of
the door mirrors can be con-
fi g u r e d v i a t h e c o l o u r s c r e e n
" E q u i p m e n t " m e n u o r d e a c t i v a t -
e d b y a P E U G E O T d e a l e r .
T h e m i r r o r s c a n a l s o b e f o l d e d m a n u a l l y .
Page 60 of 215
3
ACCESS
The vehicle will relock automati-
cally after thirty seconds unless
a door or the tailgate is opened.
This function prevents inadvert-
ent unlocking.
The duration which precedes
the automatic relocking of the
v e h i c l e c a n b e c o n fi g u r e d v i a
the colour screen "Equipment"
menu.
Folding the key
First press button A to fold the key. Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the igni-
tion is switched on, this code must be
recognised to permit starting.
This electronic engine immobiliser locks
the engine management system a few
moments after the ignition is switched
off and prevents starting of the engine
by anyone who does not have the key.
Anti-theft protection
In the event of a malfunction and if
your vehicle does not start; contact a
PEUGEOT dealer as soon as possible.
Page 61 of 215
3
ACCESS
Starting the vehicle
Insert the key in the ignition switch.
Operate the starter by turning the
key to position 4 (START) .
When the engine turns over, release
the key. The ignition switch is placed
in position 3 (ON) automatically. Switching the vehicle off
Park the vehicle.
While pressing the key, turn it to-
wards you to position 1 (LOCK) .
Remove the key from the ignition
switch. Changing the battery
Battery reference: CR1616/3 volts.
Unclip the casing using a coin at the
notch.
S l i d e t h e fl a t b a t t e r y o u t o f i t s h o u s i n g .
Slide the new battery into its housing
observing the original direction.
Clip the casing.
Key in ignition
A buzzer sounds on opening the
driver's door, if the key has been
left in the ignition.
Page 62 of 215
3
ACCESS
Keys
Make a careful note of the number of each key. This number is coded on the label attached to the key.
If the keys are lost, a PEUGEOT dealer can supply you with new keys.
Do not throw the remote control batteries away, t hey contain metals which are harmful to the environment.
Take them to an approved collection point.
Remote control
The high frequency remote control is a sensitive system; do not o
perate it while it is in your pocket as there is a
possibility that it may unlock the vehicle, without you being aware of it.
Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the
risk of stopping it from working.
The remote control does not operate when the key is in the ignition, even when the ignition is switched off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compart ment by the emergency services more
d i f fi c u l t i n a n e m e r g e n c y .
As a safety precaution (with children on board), r emove the key from the ignition when you leave the vehicle, even for a short time.
Anti-theft protection
D o n o t m a k e a n y m o d i fi c a t i o n s t o t h e e l e c t r o n i c e n g i n e i m m o b i l i s e r s y s t e m , t h i s c o u l d c a u s e m a l f u n c t i o n s .
When purchasing a second-hand vehicle
Have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones
which can start the vehicle.
Page 63 of 215
3
ACCESS
The vehicle will relock automati-
cally after thirty seconds unless
a door or the tailgate is opened.
This function prevents inadvert-
ent unlocking.
The duration which precedes
the automatic relocking of the
v e h i c l e c a n b e c o n fi g u r e d v i a
the colour screen "Equipment"
menu.
Folding the key
First press button A to fold the key. Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the igni-
tion is switched on, this code must be
recognised to permit starting.
This electronic engine immobiliser locks
the engine management system a few
moments after the ignition is switched
off and prevents starting of the engine
by anyone who does not have the key.
Anti-theft protection
In the event of a malfunction and if
your vehicle does not start; contact a
PEUGEOT dealer as soon as possible.
Page 64 of 215
3
ACCESS
Keys
Make a careful note of the number of each key. This number is coded on the label attached to the key.
If the keys are lost, a PEUGEOT dealer can supply you with new keys.
Do not throw the remote control batteries away, t hey contain metals which are harmful to the environment.
Take them to an approved collection point.
Remote control
The high frequency remote control is a sensitive system; do not o
perate it while it is in your pocket as there is a
possibility that it may unlock the vehicle, without you being aware of it.
Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the
risk of stopping it from working.
The remote control does not operate when the key is in the ignition, even when the ignition is switched off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compart ment by the emergency services more
d i f fi c u l t i n a n e m e r g e n c y .
As a safety precaution (with children on board), r emove the key from the ignition when you leave the vehicle, even for a short time.
Anti-theft protection
D o n o t m a k e a n y m o d i fi c a t i o n s t o t h e e l e c t r o n i c e n g i n e i m m o b i l i s e r s y s t e m , t h i s c o u l d c a u s e m a l f u n c t i o n s .
When purchasing a second-hand vehicle
Have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones
which can start the vehicle.
Page 65 of 215
3
ACCESS
Starting the vehicle
Insert the key in the ignition switch.
Operate the starter by turning the
key to position 4 (START) .
When the engine turns over, release
the key. The ignition switch is placed
in position 3 (ON) automatically. Switching the vehicle off
Park the vehicle.
While pressing the key, turn it to-
wards you to position 1 (LOCK) .
Remove the key from the ignition
switch. Changing the battery
Battery reference: CR1616/3 volts.
Unclip the casing using a coin at the
notch.
S l i d e t h e fl a t b a t t e r y o u t o f i t s h o u s i n g .
Slide the new battery into its housing
observing the original direction.
Clip the casing.
Key in ignition
A buzzer sounds on opening the
driver's door, if the key has been
left in the ignition.