clock setting PEUGEOT 4007 2010.5 Owners Manual
Page 21 of 215
1
INSTRUMENTS and CONTROLS
MONOCHROME SCREEN MONOCHROME SCREEN
This provides the following information:
- t h e t i m e ,
- audio system information (refer to the "Audio and Telematics" section). Setting the time
The digital clock can be set in
auto-
matic mode or in manual mode . Selecting the Setting
Select the
automatic mode or the
manual mode as follows:
Press button A "PWR" to switch on
the audio system.
Access the setting mode by pressing
button B "TUNE" for approximately
2 seconds.
Press button B "TUNE" several
times to scroll through the various
menus and select the CT menu
(clock time).
The order of the menus is the
following: AF/CT/REG/TP-S/PTY
display language/SCV/PHONE/
Functions setting mode OFF.
Automatic mode
This mode permits automatic setting
of the local time using the signal from
RDS stations.
The symbol
"CT" appears on the
screen.
Manual mode
This mode permits manual setting of
t h e t i m e u s i n g t h e a u d i o e q u i p m e n t
buttons.
It can also be used when the "Automatic
m o d e " d i s p l a y s a n i n a c c u r a t e t i m e , w h e n
the local RDS stations are broadcasting
from a different time zone.
Page 22 of 215
1
INSTRUMENTS and CONTROLS
Set the time using the buttons as
indicated below:
with the ignition on or in the ACC
( A c c e s s o r i e s ) p o s i t i o n , p r e s s a n d
hold the CLOCK button until the
t i m e d i s p l a y fl a s h e s .
Press the appropriate button to set
the time:
Button
H: to set the hours
The hours digits scroll when you press
this button.
Button M: to set the minutes
The minutes digits scroll when you
press this button.
Button 00: to reset the minutes to
zero.
- from 1 to 29 min
: rounded down to
t h e p r e v i o u s h o u r ,
- from 30 to 59 min: rounded up to
the next hour.
A f t e r s e t t i n g t h e t i m e , p r e s s t h e
DISP button; the time display stops
fl a s h i n g .
Manual mode
Automatic mode
I n t h i s m o d e , s e t t i n g i s a u t o m a t i c u s i n g
the signal from the RDS radio stations. The digital clock does not display
seconds.
When the "minutes" display is
s e t o r r e s e t t o z e r o , t h e c l o c k
starts at the zero second of the
minute selected.
The time setting is lost if the
battery is disconnected.
Turn button B "TUNE" to the left or
to the right to select "CT ON" (auto-
matic mode) or "CT OFF" (manual
mode).
A f t e r s e l e c t i n g t h e m o d e , y o u c a n
exit the "Functions setting mode"
menu by pressing button B "TUNE"
for approximately 2 seconds.
If no action is carried out within
1 0 s e c o n d s , t h e s y s t e m w i l l e x i t
the "Functions setting mode"
menu automatically.
Page 24 of 215
1
INSTRUMENTS and CONTROLS
Setting the time
The digital clock is set a u t o m a t i c a l l y .
This mode enables the system to set
the local time automatically using the
signal from the RDS stations.
O n t h e c o n t r o l p a n e l , p r e s s b u t t o n
B
(SET) to access the "Settings"
menu.
O n t h e t o u c h s c r e e n , p r e s s b u t t o n B
to access the " S y s t e m " menu.
The system settings screen is
displayed.
" I n f o " m e n u
O n t h e c o n t r o l p a n e l , p r e s s b u t t o n
D
(INFO) to access the " I n f o " screen and
consult:
- " S u p p o r t i n f o " to display the soft-
w a r e a n d d a t a v e r s i o n s ,
- "Vehicle position" to display the
G P S l o c a t i o n o f t h e v e h i c l e ,
- "Calendar" to make a note of
e v e n t s , b i r t h d a y s , e t c . ,
- " J o u r n e y " to display the average
s p e e d , f u e l c o n s u m p t i o n , d i s t a n c e s
a n d d r i v i n g t i m e ,
- "Environment" to display the alti-
t u d e , t h e a t m o s p h e r i c p r e s s u r e , t h e
exterior temperature (the ice symbol
i s d i s p l a y e d i f t h e r e i s a r i s k o f i c e ) ,
- "Air conditioning" to display the
information relating to the air condi-
t i o n i n g ,
- "Mobile
phone
" t o e n t e r a n u m b e r ,
d e l e t e a c h a r a c t e r , m a k e o r r e c e i v e
a call. "Route" menu
O n t h e c o n t r o l p a n e l , p r e s s b u t t o n
E
(NAVI) to access the "Route Menu"
screen and select:
- "Detour" to make a detour through
a s p e c i fi e d r e g i o n ,
- "
I t i n e r a r y
" t o c h a n g e t h e r o u t e ,
- "
V i e w
route" to display a route in
d i f f e r e n t w a y s ,
- "Delete
route" t o d e l e t e a r o u t e ,
- "
N e a r b y
POI" to search for the
POIs in the surrounding area.
Page 26 of 215
1
INSTRUMENTS and CONTROLS
Setting the time
The digital clock is set a u t o m a t i c a l l y .
This mode enables the system to set
the local time automatically using the
signal from the RDS stations.
O n t h e c o n t r o l p a n e l , p r e s s b u t t o n
B
(SET) to access the "Settings"
menu.
O n t h e t o u c h s c r e e n , p r e s s b u t t o n B
to access the " S y s t e m " menu.
The system settings screen is
displayed.
" I n f o " m e n u
O n t h e c o n t r o l p a n e l , p r e s s b u t t o n
D
(INFO) to access the " I n f o " screen and
consult:
- " S u p p o r t i n f o " to display the soft-
w a r e a n d d a t a v e r s i o n s ,
- "Vehicle position" to display the
G P S l o c a t i o n o f t h e v e h i c l e ,
- "Calendar" to make a note of
e v e n t s , b i r t h d a y s , e t c . ,
- " J o u r n e y " to display the average
s p e e d , f u e l c o n s u m p t i o n , d i s t a n c e s
a n d d r i v i n g t i m e ,
- "Environment" to display the alti-
t u d e , t h e a t m o s p h e r i c p r e s s u r e , t h e
exterior temperature (the ice symbol
i s d i s p l a y e d i f t h e r e i s a r i s k o f i c e ) ,
- "Air conditioning" to display the
information relating to the air condi-
t i o n i n g ,
- "Mobile
phone
" t o e n t e r a n u m b e r ,
d e l e t e a c h a r a c t e r , m a k e o r r e c e i v e
a call. "Route" menu
O n t h e c o n t r o l p a n e l , p r e s s b u t t o n
E
(NAVI) to access the "Route Menu"
screen and select:
- "Detour" to make a detour through
a s p e c i fi e d r e g i o n ,
- "
I t i n e r a r y
" t o c h a n g e t h e r o u t e ,
- "
V i e w
route" to display a route in
d i f f e r e n t w a y s ,
- "Delete
route" t o d e l e t e a r o u t e ,
- "
N e a r b y
POI" to search for the
POIs in the surrounding area.