ECO mode PEUGEOT 4007 2012 Owners Manual

1
Thank you for choosing a 4007, a sound
investment and a symbol of confi dence,
passion and inspiration.
Each model may only be fi tted with
some of the equipment mentioned in
this handbook, depending on the speci-
fi cation, the models, the versions and
the characteristics particular to the
country in which it is sold.

Page reference: this symbol accompanies advice
relating to protection of the envi-
ronment.
this symbol invites you to refer
to the pages which provide de-
tails of the function.
Warning:
this symbol marks warnings which
it is essential to observe for your
own safety, for the safety of others
or to avoid any risk of damaging
your vehicle.
this symbol draws your attention
to additional information for better
use of your vehicle.


Key


Protection of the environment:
Information: This handbook has been designed to en-
able you to make the most of your 4007.
On the fi rst few pages, you will fi nd a
detailed summary, followed by a quick
reference guide intended to make it
easier for you to become familiar with
your vehicle.
All of the details specifi c to your 4007,
comfort, safety, driving, are then pre-
sented in this handbook so as to in-
crease your appreciation of the vehicle
and to help you benefi t from it in full.

FAMILIARISATION
18

Cruise control

This maintains a constant vehicle speed
programmed by the driver.


1.
"ON/OFF"
button: activation/deacti-
vation of cruise control mode.

2.
"COAST SET"
button: storing a
driving speed then decreasing the
cruising speed.

3.
"ACC RES"
button: increasing the
cruising speed and recalling the
stored speed.

4.
"CANCEL"
button: switching off the
cruise control.
In order to be programmed or activated,
the vehicle speed must be higher than
25 mph (40 km/h) with at least second
gear engaged. This detects obstacles (person, vehicle,
tree, gate, ...) located behind the vehicle.
The vehicle is fi tted with four sensors:

D.
two side sensors.

E.
two central sensors.


Audible rear parking sensors




121



123



DRIVING SAFELY

Four wheel drive system

Three transmission modes are avail-
able and can be selected manually by
the driver to suit the circumstances:

A. Two wheel drive (2WD),


B. Four wheel drive
(4WD AUTO),


C. Four wheel drive
(4WD LOCK).




119


Also...
You can change transmission
mode when stationary or when
driving at a speed below 60 mph
(100 km/h).

1
INSTRUMENTS and CONTROLS
INSTRUMENT PANEINSTRUMENT PANEL

3.
Instrument panel screen:


- Warning and status displays.

- Total and trip distance recorders.

- Service indicator.

- Coolant temperature.

- Trip computer information.

- Cruise control setting.

-
Dashboard lighting and parameter
settings.

- Fuel level.

- Ambient temperature.

- Transmission mode.

Panel grouping together the dials and
warning/indicator lamps. These inform
the driver of the activation/deactivation
of a system or of the occurrence of a
fault.
Screen type 1
Screen type 2


1.
Rev counter.

2.
Speedometer.

1
INSTRUMENTS and CONTROLS

Prevention messages




Information messages (ignition at "ON")



Message



is on



Status of the system







2WD two wheel
drive system
Flashing When the "2WD" (2 wheel drive) mode is selected using
the transmission mode selector.




4WD four wheel
drive system
Flashing When the "4WD" (4 wheel drive) mode is selected using
the transmission mode selector.
This mode is the default mode.




4WD LOCK four
wheel drive system
Flashing When the "LOCK" (4 wheel drive) mode is selected using
the transmission mode selector.




Ambient
temperature
Fixed This indicates the ambient temperature.
When the vehicle is stationary or if the speed is below 12 mph
(20 km/h) the temperature displayed may not be the true
temperature.


Display



is on



Cause



Solution - action



Observations







Service
indicator
Fixed Informs the driver of
the time remaining
before the vehicle's
scheduled service. Contact a
PEUGEOT dealer
or a qualifi ed
workshop. This is displayed for a few
seconds when the ignition is
switched on.




Break
advised
Fixed Informs the driver that
they should stop to
take a break. You are advised to
take a break. This is displayed when the
driving time that you set
previously is reached.
An audible signal is heard
3 times and is then heard
every 5 minutes until the
vehicle stops.

1
INSTRUMENTS and CONTROLS
TRIP COMPUTER
Average fuel
consumption
(l/100 km or km/l or
mpg)
This is the average fuel
consumption since the
last zero reset.
This fi gure may change follow-
ing a change in the style of driv-
ing or the relief resulting in an
increase or decrease in the cur-
rent fuel consumption.


Average speed (km/h
or mph)
This is the average
speed calculated since
the last zero reset.


Resetting the information to zero

When the ignition is switched on, the
zero reset switches automatically from
manual mode to automatic mode.
If dashes "---" are displayed
for long periods in place of the
digits while driving, contact a
PEUGEOT dealer or a qualifi ed
workshop.


Current fuel
consumption
(l/100 km or km/l or
mpg)
This is the average fuel
consumption during the last
few seconds of driving.


Information display

With the ignition on, press the INFO

button on the dashboard, to the left of
the instrument panel, several times in
succession to display the different infor-
mation:


- average fuel consumption,

- average speed,

- current fuel consumption. When the required information is dis-
played, press the INFO
button for more
than two seconds to reset all of the in-
formation to zero.

Automatic
If the ignition key remains in the OFF
position for more than 4 hours, the in-
formation is reset to zero automatically.

1
INSTRUMENTS and CONTROLS

Choice of the fuel consumption
units
You can choose between different units
for displaying fuel consumption. On the menus screen:


)
press the INFO
button to select
"UNIT"
.

)
press and hold the INFO
button for
a few seconds to display the "UNIT"

screen.

)
press the INFO
button to scroll the
units (km/L, L/100 km, mpg (US),
mpg (UK) and PREVIOUS) in suc-
cession.

)
press and hold the INFO
button for
a few seconds to confi rm your se-
lection. In this case, the distance, speed and
quantity of fuel units will also be changed
in accordance with your choice of fuel
consumption unit. If the battery is disconnected,
the settings memory is cleared
and the default unit (km/L) is re-
stored automatically.


Choice of the temperature
display unit
You can choose between different units
for displaying the temperature.
On the menu screen:


)
press the INFO
button to se-
lect the temperature unit set-
ting symbol (thermometer).

)
press and hold the INFO
button for
a few seconds to scroll the units
(°C and °F) in succession.
The mode selected is confi rmed.
If the battery is disconnected,
the settings memory is cleared
and the default unit (°C) is re-
stored automatically.


Choice of the reinitialisation of
the average consumption and
average speed
You can choose between two average
fuel consumption and average speed
reinitialisation modes:


- automatic reinitialisation (
choice 1)
,

- manual reinitialisation (choice 2)
.
On the menu screen:


)
press the INFO
button to select:

)
press and hold the INFO
button for
a few seconds to switch in succes-
sion from reinitialisation mode 1



(au-
tomatic)
to reinitialisation mode 2
(manual)
.
The mode selected is confi rmed.

1
INSTRUMENTS and CONTROLS

Choice of the display language

On the menu screen:


)
press the INFO
button to select
"LANGUAGE"
.


)
press and hold the INFO
button
for a few seconds to display the
"LANGUAGE"
screen.

)
press the INFO
button to scroll
the languages (Japonais, English,
Deutsch, Français, Espanol, Italiano,
"---" and PREVIOUS) in succes-
sion.

)
press and hold the INFO
button for
a few seconds to confi rm your se-
lection.
If you select the "---" setting, no
message will be displayed in
message display situations. If the battery is disconnected, the
settings memory is cleared and
the default language (ENGLISH)
is restored automatically.


Activation/deactivation of the
"INFO" button sound
You can activate or deactivate the INFO
button sound.
On the menu screen:


)
press the INFO
button to se-
lect the INFO
button sound
activation/deactivation sym-
bol (located on menu 2/3)
.

)
press and hold the INFO
button for
a few seconds to scroll the choices
(ON, OFF) in succession.
The mode selected is confi rmed.
If the battery is disconnected,
the settings memory is cleared
and the default choice (ON) is
restored automatically.


Changing the display interval
of the "BREAK REMINDER"
message
On the menu screen:


)
press the INFO
button to select
"ALERT" (located on menu 2/3)
.

)
press and hold the INFO
button
for a few seconds to display the
"ALERT"
screen.


)
press the INFO
button to select
the display interval of the "BREAK
REMINDER"
message.

)
press and hold the INFO
button for
a few seconds to confi rm.
If the battery is disconnected,
the settings memory is cleared
and the default value (OFF) is
restored automatically.

You can choose between different lan-
guages for the display. You can change the display interval of
the "BREAK REMINDER"
message.

1
INSTRUMENTS and CONTROLS
MONOCHROME SCRCHROME SCREEN

This provides the following information:


- the time,

- audio system information (refer to
the "Audio and Telematics" section).



Setting the time

The digital clock can be set in automatic
mode
or in manual mode
.


Selecting the Setting

Select the automatic mode
or the
manual mode
as follows:


)
Press button A
"PWR" to switch on
the audio system.

)
Access the setting mode by press-
ing button B
"TUNE" for approxi-
mately 2 seconds.

)
Press button B
"TUNE" several
times to scroll through the various
menus and select the CT menu

(clock time).
The order of the menus is the
following: AF/CT/REG/TP-S/PTY
display language/SCV/PHONE/
Functions setting mode OFF.
Automatic mode
This mode permits automatic setting
of the local time using the signal from
RDS stations.
The symbol "CT"
appears on the
screen.

Manual mode
This mode permits manual setting of
the time using the audio equipment but-
tons.
It can also be used when the "Automatic
mode" displays an inaccurate time,
when the local RDS stations are broad-
casting from a different time zone.

1
INSTRUMENTS and CONTROLS
Set the time using the buttons as indi-
cated below:


)
with the ignition on or in the ACC
(Accessories) position, press and
hold the CLOCK
button until the
time display fl ashes.

)
Press the appropriate button to set
the time:

Button
H:
to set the hours
The hours digits scroll when you press
this button.

Button M:
to set the minutes
The minutes digits scroll when you
press this button.

Button 00:
to reset the minutes to
zero.


- from 1 to 29 min
:
rounded down to
the previous hour,

- from 30 to 59 min:
rounded up to
the next hour.


)
After setting the time, press the
DISP
button; the time display stops
fl ashing.


Manual mode

Automatic mode

In this mode, setting is automatic using
the signal from the RDS radio stations. The digital clock does not dis-
play seconds.
When the "minutes" display is
set or reset to zero, the clock
starts at the zero second of the
minute selected.
The time setting is lost if the bat-
tery is disconnected.


)
Turn button B
"TUNE" to the left or
to the right to select "CT ON"
(auto-
matic mode) or "CT OFF"
(manual
mode).

)
After selecting the mode, you can
exit the "Functions setting mode"
menu by pressing button B
"TUNE"
for approximately 2 seconds.
If no action is carried out within
10 seconds, the system will exit
the "Functions setting mode"
menu automatically.

2
COMFORT

Air conditioning On/Off (5)


)
Press button 5
to activate the air
conditioning.
The indicator lamp comes on.
Intake of exterior air/
Recirculation of interior air (4)

This function insulates the passenger
compartment from exterior odours and
smoke.


)
Press button 4
to select the air in-
take mode.
When the indicator lamp on button 4
is
off, the exterior air intake function is on.
When the indicator lamp on button 4
is
on, the intake of exterior air is off and
the system is in air recirculation mode.

Do not drive for long periods in
interior air recirculation mode,
except in truly exceptional atmo-
spheric conditions.
Personalisation of the Exterior
air intake/Interior air recirculation
function
This function is controlled automati-
cally. However, you can deactivate its
automatic control if you wish to change
the air intake mode at any time.

Personalisation of the Air
Conditioning On/Off function
This function is controlled automati-
cally. However, you can deactivate its
automatic control if you wish to activate
or deactivate the air conditioning at
any time.
The settings are retained, even
after switching off the ignition.
Changing the status
Press the Air intake/Interior air recircu-
lation button for at least 10 seconds.
When the status changes from active to
inactive, three bleeps are heard and the
indicator lamp fl ashes three times.
When the status changes from inactive
to active, two bleeps are heard and the
indicator lamp fl ashes three times.

Automatic control active
If the air distribution adjustment dial and
the air fl ow adjustment dial are placed
in the "AUTO" position, the Air intake/
Interior air recirculation function is also
controlled automatically.

Automatic control inactive
Even if the air distribution adjustment
dial and the air fl ow adjustment dial are
placed in the "AUTO" position, the Air
intake/Interior air recirculation function
is no longer controlled automatically.
Changing the status
Press the Air Conditioning On/Off button
for at least 10 seconds.
When the status changes from active to
inactive, three bleeps are heard and the
indicator lamp fl ashes three times.

When the status changes from inactive
to active, two bleeps are heard and the
indicator lamp fl ashes three times.

Automatic control active
If the air distribution adjustment dial and
the air fl ow adjustment dial are placed in
the "AUTO" position, or if the tempera-
ture control dial is set to the minimum
temperature, the air conditioning system
is controlled automatically.

Automatic control inactive
The air conditioning system is no longer
controlled automatically.