change time PEUGEOT 4008 2012 User Guide

182
Practical information
bulbs (4)
) Remove the protective plastic cover.)
Turn the bulb holder to the left and pull it out. )
Remove the bulb and its base by pressing on the lug at the bottom. )
Change the bulb.
For reassembly, carry out these operations in reverse order.
Changing main beam headlamp bulbs (2)
)
Turn the bulb holder a quar ter turn to the
left and pull it out. ) Pull out the bulb and replace it.
To reassemble, carry out these operations in reverse order.
Changing the daytimerunning lamps / sidelamps(light-emitting diodes - LEDs) (6)
For the replacement of this type of LED lamp,contact a PEUGEOT dealer or a qualified
workshop.
Changing dipped headlamp
bulbs (3)
For the replacement of these bulbs, contact a
PEUGEOT dealer or a qualified workshop.

To replace these bulbs contact a PEUGE
OT
dealer or a qualified workshop.

Changing front foglamp
bulbs (7) / daytime runninglamp bulbs (5)

214
Checks






Checks
12 V battery


Electrolyte level

For access to the battery, refer to the"12V bat tery" section.
The electrolyte level must bebetween the "LOWER LEVEL" and "UPPER LEVEL" marks.Refer to the servicin
g booklet for
details of the replacement inter vals
for these components.
Dependin
g on the environment (e.g.
dusty atmosphere) and the use of the vehicle (e.g. city driving), replace them twice as often if necessary.y A clogged passenger compar tment filter mayhave an adverse effect on the performance
of the air conditioning system and generate undesirable odours.

Air filter and passenger compartment filter

Replace the oil filter each time the engine oil is changed.
Refer to the servicing booklet for
details of the replacement inter val for
this component.
Oil filter
If necessary, top up using distilled water,
removing the battery cap from each cell.
Check the electrolyte level at leastonce a month.
When carrying out work on the battery, refer
to "12V battery" section for details of the
precautions to be taken before disconnectingthe battery and following its reconnection.
Unless other wise indicated, check these components in accordance with the ser vicin
g booklet and according to your engine.Other wise, have them checked by a PEUGEOT dealer or a qualified workshop.

227
03NAVIGATION - GUIDANCE
Manoeuvre icon: indicates whether the


A. driver should turn left or right at the next junction indicated by the guidance and thedistance to this junction.
Guidance route: indicates the route to the
B. destination.
Vehicle marker: indicates the position of
C. the vehicle while driving.
TMC icon: displays traffi c information
D. such as traffi c jams, road works, etc.
When the icon is touched, detailed TMC information can be viewed.
Orientation mark: indicates the orientation

E. of the map displayed.
Map scale: indicates the scale of the map

F. displayed.
Name of the street: indicates the name of

G. the current street.
Direction frame: displays the number of

H. the next road or the name of the nextstreet which the driver should turn into.
Destination/intermediate destination icon:

I. indicates the direction of the destinationor intermediate destination.
Two-map displa
y.
Single map display.















INFORMATION DISPLAYED ON THE MAP
DURING NAVIGATION Destination/intermediate destination

J. information: indicates the distance and
the time remaining until the destination or
intermediate destination is reached.
Press for access to the K. Route Menuinorder to:
- change the route in favour of another K1 making a detour through a specifi ed region,
- change the position of the destination,K2 add an intermediate destination and change the route calculation conditions,
- display a route by various methods, K3
- delete a route created, K4
- search for points of interest (POI) K5 around the current location.


K
H
E
F
BCA
D
G
I
J

230
03

NAVIGATION SETTINGS
AND INFORMATION (1/2)- Select the settings of functions linked with the G navigation to:
- set the screen display parameters such as: G1
- display 1 or 2 maps,
- display or do not display the POIs on the map, display selected icons,
- change the colours of the map,
- display or do not display the name of the current street.
- display or do not display the address of the current street.
- set route conditions, such as,G2


- avoiding traffi c problems,

- avoiding selected areas,

- avoiding roads at a certain time.
- set the route guidance mode and the displayingG3 of the results of the route search.
- save, change or delete a location in the addressG4 book,
- display and select the traffi c information suchG5 as traffi c jams or road works by selecting dynamic guidance.

NAVIGATION - GUIDANCE
G1G2G3
G4G5
G

236
04
WHAT IS RDS?
The Radio Data S
ystem (RDS) function on the FM waveband permits:
- automatic retuning to alternative frequencies carrying the same station
while travelling through different regions (if the transmitters of thisstation cover the area through which you are travelling),
- temporar
y tuning to traffi c information announcements,
- displa
y of the name of the station, etc...
M
ost FM stations use RDS.
These stations transmit non-audible data in addition to their pro
grammes.
The data transmitted in this wa
y allows you access to various functions,mainly displaying of the name of the station, temporary tuning to
traffi c information announcements or automatic retuning to alternativefrequencies.
RD
S allows you to continue listening to the same station automatically by means of alternative frequencies. However, alternative frequencies may not
be provided throughout the country. Radio stations do not cover the whole country, which explains the loss of reception of the station during a journey.


REGIONAL MODE

Some stations are organised in a network.
In different regions, they broadcast different or shared programmesdepending on the time of day. gyg,y

You can follow:


- a regional station only,

- the entire network, with the possibility that you will be listening
to a different programme.


















RADIO, RDS, AF, REG, TP, PTY

AUDIO / VIDEO
RDS ALTERNATIVE FREQUENCIES
Your radio automatically checks and selects the best frequency for the radio station
to which it is tuned (if the station broadcasts on several transmitters or frequencies).
The
frequency of a radio station covers approximately 30 miles(50 km). The change from one frequency to another explains the loss of reception
during a journey.
If the station to which
you are listening does not have several frequencies in theregion in which you are currently located, you can deactivate automatic alternative
frequencies.

TRAFFIC INFORMATION FUNCTION

The Traffic Programme (TP) function permits automatic andtemporary switching to an FM station broadcasting traffi c g() pg() p
information. pyp

The radio station or the source that you are listening to at this pointis paused. Once the traffi c information has ended, the system switches back to
the radio station or the source that you were listening to initially.

PROGRAMME TYPES

Some stations offer the option of listening to a themed type of
programme as a priority, selected from the list available below:
NEWS, AFFAIRS, INF
OS, SPORT, EDUCATE, DRAMA, CULTURE,SCIENCE, VARIED, POP M, ROCK M, EASY M, LIGHT M, CLASSICS, OTHER M, WEATHER, FINANCE, CHILDREN,SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ,COUNTRY, NATION M, OLDIES, FOLK M, DOCUMENT.

256
04
INFORMATION DISPLAYED IN DVD MODE
AUDIO / VIDEO


The DVD button is only active if the player contains a DVD.
Press
Open to return the screen to the vertical position.
For safet
y reasons, the video is notdisplayed while driving, however the audiocan be played.
To displa
y the picture and watch a DVD, park the vehicle in a safe place.
To play the previously selected zone on

J. the disc.
To display the DVD title menu.

K.
To scroll up or down through the chapters.

L.
Press and hold for fast backwards or forwards play.
To scroll up or down through the titles.

M.
To enter a title or chapter number.

N.
To change the angle.

O.
To change the language of the subtitles.

P.
To change the language.

Q.
To select a chapter or title or specify a

R. number.
This icon is displayed when the operation



A. requested cannot be carried out.
The number of the chapter currently beingB. played is displayed.
The number of the title currently being C. played is displayed.
Symbols display the current status of theD. player.
The playing time is displayed. E.
To resume normal play when play isF. paused or during slow-motion play.
To stop play temporarily.G.
To stop play. Press the screen to accessH. the menu.
For slow-motion play. I.
ABCDE
FGHIJ
KLM
RQPON

287
1
1
1
11
03GENERAL OPERATION

Press the "PWR" button.
Th
e last source selected beforeswitching off resumes operation.
The audio equipment functions can be
used when the ignition switch is in the "ON" or "ACC" position.
To switch o
ff, press the "PWR" button
again.

ADJU
STING THE VOLUME

SETTING THE AUDIO MODES

Press the "
SOUND" button several
times; the audio modes change in the following order:

SUB PUNCH / TYPE / FIELD / BASS / MID / TREBLE / FADER / BALANCE / OFF.
Turn the "V
OL" dial respectively to the
left to decrease the volume or to theright to increase it. To access the personalised sound
functions quickl
y, press and hold
this button, then turn it to reach the
personalised sound setting of your choice.
Release the button to store thesetting. QUICK ACCESS MODE SWITCHING ON / OFF

The audio settin
g mode is deactivated when the radio is operated or a CD is played or after approximately 10 seconds without anyaction.I
f you press this button for more than2 seconds in the audio setting mode,
the system switches to "Hold" mode.
The audio mode selected will be
retained until you press this button again for more than 2 seconds. "HOLD" MODE

290
03
1
1
GENERAL OPERATION
This permits automatic adjustment of the "VOLUME", "BASS","MID" and "TREBLE" settings in relation to the vehicle speed.
"
SCV" AUTOMATIC VOLUME ADJUSTMENT
Turn the "
SOUND" dial to set the
volume of the bass unit.
Only vehicles fi tted with the "PremiumSound" system can offer the "SUB
PUNCH" setting. "SUB PUNCH" BASE UNIT VOLUME SETTING
If the "SUB PUNCH" is chan
ged, the sound cuts out briefl y.
Pr
ess the "SOUND" button for morethan two seconds to gain access to
the functions setting mode.
Then,
press this same button several
times; the functions setting mode changes in the following order:
AF
/ CT / REG / TP-S / PTY (languages) / SCV / PHONE / OFF.
Turn the "
SOUND" dial respectively to
the left to deactivate the function or to
the right to activate it.

291
04
1
11
1
RADIO
SELECTING RADIO SOURCE

Press the "PWR" button or the"AM/FM" button to switch on the radio.

Pr
ess the "AM/FM" button several
times in succession to select the
waveband; it changes in the following
order: FM1 / FM2 / FM3 / MW / LW / FM1...
AUTOMATIC STATION SEARCH
MANUAL STATION SEARCH

Turn the "TUNE" dial respectivel
y to
the left to search the lower frequencies
or to t
he right to search the higher frequencies.
Press the "
SEEK " or "SEEK "
button to search the lower frequencies
or the hi
gher frequencies respectively.

The search begins automatically and stops at the fi rst station found.
SELECTING THE WAVEBAND















SELECTION / PRESETTING

293
04
1
RADIO

The "Radio Data System" (RDS) function on the FM waveband permits:


- access to the displa
y of information, such as the name of the station, ...

- listenin
g to the same station while travelling through different regions,

- temporar
y tuning to traffi c information announcements.
Most FM stations use RD
S. These stations transmit non-audible
data in addition to their programmes.
The data transmitted in this wa
y allows you access to various
functions, mainly displaying of the name of the station, automatic
retuning to alternative frequencies or temporary retuning to traffi c
information announcements.
RD
S allows you to continue listening to the same station by meansof alternative frequencies that carry the same station. However,
in certain conditions, RDS alternative frequencies may not beprovided throughout the country. Radio stations do not cover thewhole country, which explains the loss of reception of the station
during a journey. "AF" ALTERNATIVE FREQUENCIES
Your radio automaticall
y checks and selects the best frequency for
the radio station to which it is tuned (if the station broadcasts onseveral transmitters or frequencies).
The frequenc
y of a radio station covers approximately 30 miles (50 km). The change from one frequency to another explains the
temporary loss of reception during a journey.
If the station to which
you are listening does not have severalfrequencies in the region in which you are currently located, you can
deactivate alternative frequencies.
Some stations are or
ganised in a network.
In different re
gions, they broadcast different or shared programmes
depending on the time of day.
Y
ou can follow:
- a regional station only,
- the entire network, with the possibilit
y that you will be listening
to a different programme.
REG REGIONAL MODE

On long distance journeys, when the stored station becomes weak,
the radio searches fi rst for another frequency for the same station (AF). Then, if this fails, it searches for a frequency broadcasting the regional programme (REG). If this also fails, the radio returns to thestored station.
The "AF", "REG" and "TP" functions
can be deactivated or activated via the"TUNE" button functions setting mode.



















RDS