mirror controls Peugeot 406 2002.5 Owner's Manual

29-07-2002
10 Instrument dials.
11 Driver's air bag.
Horn.
12 Windscreen washwipe
stalk.
Trip computer stalk.
13 Radio remote control stalk.
14 Steering lock and ignition.
15 Electric mirror controls.
Window controls.
Rear window locking
control.
16 Electronic Stability
Programme (ASR/ESP)
switch.
17 Headlamp height adjust
ment.
18 Fuse box. 19
Steering wheel adjustment.
20 Cruise control
21 Rear ashtray.
22 Cupholder.
23 Handbrake.
24 Heated seat switches.
Passenger air bag
disarming switch.
Alarm button
25 Lighter.
26 Rear footwell heating vent.
27 Front ashtray.
28 Gear lever.
29 Radio.
30 Heating/ventilation controls.
31 Multifunction display.
YOUR 406 AT A GLANCE
3
1 Speaker (tweeter) location.
2 Window demisting vent.
3 Side adjustable heating/
ventilation vent and air flow
regulation.
4 Glove box.
5 Passenger air bag.
6 Windscreen demisting vents.
7 Central adjustable heating/
ventilation vents and air flow
regulation.
8 Hazard warning lights switch.
9 Lights and direction indica
tors stalk.
Arming/disarming of auto
matic switching on of lights.

29-07-2002
3 Setting the air
distribution
Windscreen and side windows
(deicing/demisting).
To quickly deice or demist the wind
screen and the side windows:
– set the temperature and air flow controls to maximum,
– close the central vents,
– press the A/C button.
Windscreen and side win
dows, central and side vents
and footwells.
Central and side vents and
footwells.
These settings are recommended for
cold climates.
Central and side vents.
This setting is recommended for hot
climates. 4 Air flow adjustment
Turn the knob to obtain sufficient
flow.
5 Air intake control
Recirculation of the interior air (indi
cator light on).
This position prevents the entry of
unpleasant odours or fumes from
outside and increases the speed of
heating.
Used simultaneously with the air
conditioning, recirculation improves
the performance of the system when
set to hot as well as to cold.
Used in humid conditions, recircula
tion risks misting up the windows.
As soon as possible, place the con
trol in the outside air position. 6 Demisting the rear
screen
With the engine running, pressing
the switch demists the rear screen
and the mirrors.
It switches off automatically after
approximately fifteen minutes.
Press again to resume demisting.
It is possible to stop the demisting
operation before it goes off automat
ically, by pressing the switch again.
Important precaution
Operate the air conditioning for 5 to
10 minutes, once or twice a month,
to keep it in good working order.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Note: The condensation created by
the air conditioning causes a normal
flow of water under the vehicle when
stationary.
YOUR 406 IN DETAIL 59

29-07-2002
Recalling a memorised
position
• Door open and ignition off Within ten minutes of switching off
the ignition and opening the door, a
short press on button 1or 2recalls
the memorised position of the seat,
then of the exterior mirrors.
• Door closed or ignition on: keeping the button pressedadjusts the seat and the exterior
mirrors.
When adjustment is completed a
bleep will sound.
YOUR 406 IN DETAIL 113
Memorising the seat and
mirror positions
Two driving positions can be memo
rised.
To memorise:
place the ignition key in the acces sories position;
adjust your seat and mirrors;
simultaneously press button "M"
and button "1"for the first driving
position or button "2"for the
second driving position.
When the position has been
memorised, you will hear two
bleeps.
Memorising a new position cancels
the previous one. Heated seat controls
Press the switch.
The temperature is controlled auto
matically.
Pressing a second time stops opera
tion.

29-07-2002
AUTOMATIC SWITCHING ON
OF THE LIGHTS
Side lights and dipped beam head
lamps switch on automatically if the
light is poor, or during continuous
operation of the windscreen wipers.
They switch off as soon as the light
becomes bright enough or the wind
screen wipers stop.
This function is active when the vehi
cle is supplied to the customer.
To disarm or activate the function: Place the key in the accessories
position (1st notch),
 Press the end of the lights stalk
for more than two seconds.
Note: In foggy weather, the bright
ness sensor can detect sufficient
light. Because of this, the lights do
not come on automatically.
Do not cover the brightness sen
sor connected to the rain sensor,
located in the windscreen behind
the mirror. It is used for automatic
switching on of the lights. Operating check
Activation
Activation of this function is accom
panied by an audible signal and the
message
"Automatic lighting of
the headlamps activated" on the
multifunction display.
Note: Always operate the lighting
controls manually where this is pos
sible.
Disarming
Disarming of the function is accom
panied by an audible signal.
When driving, if this function is
switched off when the headlamps
would switch on in automatic mode,
the lights remain on.
It is however possible to disarm this
function and switch off the lights by:
manually switching off the lights using the lights stalk,
switching off the engine.
YOUR 406 IN DETAIL 123
If the brightness sensor does not
function correctly, the system acti
vates the function (the lights come
on).The driver is alerted by the flash
ing of the ''dipped beam'' warning
light on the instrument panel.
Contact a PEUGEOT dealer to have
the system checked.
Follow me Home
When there is a low level of bright
ness or at night, if you leave your
vehicle, the side lights and the
dipped beam lights may remain on
for approximately one minute.
To do this: place the lights stalk in the AUTO
position,
 place the key in the accessories
position (first notch),
 press the end of the lights stalk for
more than two seconds,
 place the lights stalk in the 0posi
tion,
 flash the headlamps,
 get out of the car and lock it.