tailgate Peugeot 406 2002.5 Owner's Manual

THE KEYS
The keys allow you to switch on the
ignition and to independently operate
the locks on the front door, the glove
box and the passenger air bag dis
arming switch.
Central locking
From the driver's door, the keys
allow you to lock, deadlock* and
unlock the doors and boot/tailgate.
If one of the front doors is open, the
central locking does not work.
The remote control performs the
same functions at a distance.
The remote control
Locking
Press button Ato lock the vehicle.
YOUR 406 IN DETAIL 105
This is confirmed by fixed lighting of
the direction indicators for approxi
mately two seconds.
Unlocking
Press button
B to unlock the vehicle.
This is confirmed by rapid flashing of
the direction indicators.
Note: do not repeatedly press the
button of your remote control out of
range of your vehicle. You risk caus
ing it not to work and the remote con
trol would have to be reprogrammed. ELECTRONIC ENGINE
IMMOBILISER
This locks the engine management
system as soon as the ignition has
been switched off and therefore pre
vents starting of the vehicle by any
one who does not have the key.
The ignition key has an electronic
chip which has a special code. When
the ignition is switched on, the code is
recognised and starting is possible.
If the system does not function
correctly,
an audible signal sounds,
accompanied by a message on the
multifunction display.
WARNING: your vehicle is no longer
protected in this event.
Contact a PEUGEOT dealer as soon
as possible.
Locating your car
To locate your car, if you have locked
it, in a car park: 
press button A. The courtesy
lights come on and the direction
indicators flash for a few seconds.
Key in ignition
A buzzer sounds on opening the dri
ver's door, if the key has been left in
the ignition.
29-07-2002

THE KEYS
The keys allow you to switch on the
ignition and to independently operate
the locks on the front door, the glove
box and the passenger air bag dis
arming switch.
Central locking
From the driver's door, the keys
allow you to lock, deadlock* and
unlock the doors and boot/tailgate.
If one of the front doors is open, the
central locking does not work.
The remote control performs the
same functions at a distance.
The remote control
Locking
Press button Ato lock the vehicle.
YOUR 406 IN DETAIL 105
This is confirmed by fixed lighting of
the direction indicators for approxi
mately two seconds.
Unlocking
Press button
B to unlock the vehicle.
This is confirmed by rapid flashing of
the direction indicators.
Note: do not repeatedly press the
button of your remote control out of
range of your vehicle. You risk caus
ing it not to work and the remote con
trol would have to be reprogrammed. ELECTRONIC ENGINE
IMMOBILISER
This locks the engine management
system as soon as the ignition has
been switched off and therefore pre
vents starting of the vehicle by any
one who does not have the key.
The ignition key has an electronic
chip which has a special code. When
the ignition is switched on, the code is
recognised and starting is possible.
If the system does not function
correctly,
an audible signal sounds,
accompanied by a message on the
multifunction display.
WARNING: your vehicle is no longer
protected in this event.
Contact a PEUGEOT dealer as soon
as possible.
Locating your car
To locate your car, if you have locked
it, in a car park: 
press button A. The courtesy
lights come on and the direction
indicators flash for a few seconds.
Key in ignition
A buzzer sounds on opening the dri
ver's door, if the key has been left in
the ignition.
29-07-2002

BOOT
Simultaneous locking or unlocking
of the boot and the doors
Turn the key a quarter turn from
A to B.
The boot is then controlled by the
remote control or the driver's door
lock.
Locking the boot only
Turn the key a quarter of a turn from
A to C. The boot is then locked,
whatever the action of the remote
control or the driver's door lock.
To return to simultaneous operation
with the doors: turn the key from
A to B. Opening the tailgate of the
7 seater estate from inside
Slide button
Aand press.
To lock the interior control, turn the
key to the left.
YOUR 406 IN DETAIL 109
29-07-2002

29072002
MAINTENANCE OF YOUR 406
34
CHANGING A WHEEL
Access to the spare wheel
and jack
Saloon:
lift the boot carpet using the
lifting hook. Secure the hook behind
the boot seal.
Estate: unscrew the two carpet
retaining screws a quarter turn using
the ignition key or a coin. Lift the car
pet and secure the retaining hook
behind the tailgate seal.
7seater estate: fold back the third
row seat, then lift the carpet to gain
access to the spare wheel. Tools
1
Wheel brace.
2 Centralising tool.
3 Trim remover/wheel brace
extension.
4 Jack.
5 Removable towing eye.
6 Alloy wheel trim remover.
7 Trim cap tool.
The tool holder supports the boot
floor. Reposition it to prevent any
deformation of the floor when
loaded.
Tighten the spare wheel securing
strap to prevent noise and for your
safety in the event of a frontal
impact. Removal
Park the vehicle on level, stable
and nonslippery ground.
Apply the handbrake, engage first or reverse gear (position Pfor the
automatic gearbox).
Remove the wheel trim using the wheelbrace by pulling next to the
valve. For vehicles fitted with alloy
wheels 8, remove the centre
trim by using tool 6in one of the
holes.
Loosen the wheel bolts.
For vehicles with alloy wheels 8,
remove the chrome trim caps before
hand (see page on 'special features
of alloy wheels' in this section).

29072002
Tailgate lights
Open the flap using the cutout pro
vided.
Disconnect the connector by releas
ing tab A.
Unscrew the two nuts.
Remove the light by squeezing the
two tabs B. Extract the bulb holder by pressing
the tabs
C.
Change the faulty bulb.
1 Side lights (P 21/5 W).
2 Reversing lights (P 21 W).
3 Fog lamp (P 21 W). Number plate lights (W 5 W)
Remove the translucent protector.
Change the faulty bulb.
MAINTENANCE OF YOUR 406
40

29072002
Tailgate lights
Open the flap using the cutout pro
vided.
Disconnect the connector by releas
ing tab A.
Unscrew the two nuts.
Remove the light by squeezing the
two tabs B. Extract the bulb holder by pressing
the tabs
C.
Change the faulty bulb.
1 Side lights (P 21/5 W).
2 Reversing lights (P 21 W).
3 Fog lamp (P 21 W). Number plate lights (W 5 W)
Remove the translucent protector.
Change the faulty bulb.
MAINTENANCE OF YOUR 406
40