Peugeot 407 2004 Owner's Manual

110 -
17-05-2004
111
-
17-05-2004
Interior comfort
TRIP COMPUTER
or
TRIP: access to the
trip computer displays.
Each successive press on the but-
ton located at the end of the wipers
stalk displays different information.
- the "vehicle" tab with:• the range and the current con-
sumption,
- tab "1" (route 1) with:
• the average consumption, the distance travelled and the aver-
age speed calculated over route
"1" ,
- tab "2" (route 2) with the same
characteristics.
Zero reset
When the required route is displayed,
press the control for more than two
seconds.
Access via the general menu
or via the "TRIP" control on
the control panel
C screen.
CT screen.
DT screen. General menu
Press the
"MENU" button to gain
access.
Select the "Trip computer" ap-
plication using the navigator, then
conirm.
The "Trip computer" menu offers
various options:
- Warnings log,
- Status of the functions,
- Inputting of the distance to be travelled.
Warnings log
This summarises the active warning
messages, displaying them on the
multifunction display in succession.
Status of the functions
This summarises the active or inac-
tive status of the functions present on
the vehicle.
Distance remaining
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled value.

110 -
17-05-2004
111
-
17-05-2004
Interior comfort
Range
This shows the distance that can still
be covered with the fuel remaining in
the tank.
This igure may increase if there is a
change in the style of driving or the
road surface, producing a signiicant
drop in current consumption.
When the range is less than 20 miles
(30 km), four segments are dis-
played. After illing with fuel, the
range is displayed when it exceeds
62 miles (100 km).
If horizontal segments are displayed
for long periods instead of digits,
contact a PEUGEOT dealer.
Current consumption
This is the average quantity of fuel con-
sumed during the last few seconds.
This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
Average consumption
This is the average fuel consump-
tion since the computer was last set
to zero.
Distance travelled
This indicates the distance travelled
since the computer was last set to
zero.
Distance remaining
to be travelled
This is the distance remaining to the
destination. It can either be calcu-
lated by the navigation if guidance
is activated, or entered by the user,
minus the distance covered since the
distance was entered.
If digits are missing, dashes are dis-
played in their place.
Average speed
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
The routes
The routes "1" and ''2'' are independ-
ent but have identical application.
Route "1" for example allows you
to make daily calculations and route
"2" monthly calculations.

112 -
17-05-2004
113
-
17-05-2004
Interior comfort

112 -
17-05-2004
113
-
17-05-2004
Interior comfort
1
. Sunshine sensor*.
2 . Temperature and humidity sensor.
3. Air diffuser.
4. Windscreen de-icing or demist-
ing vents.
5 . Front window de-icing or demist-
ing vents.
6 . Side vents.
7 . Centre panel vents.
8 . Air outlet to passenger foot-
wells.
9 . Two ventilation vents at the rear
at the base of the centre console
between the passengers.
10 . Adjustment of the glove box air
low (see section "Interior layout").
Advice on operation
To obtain correct ventilation, avoid
closing the air diffuser 3.
In hot weather, to obtain increased
ventilation, you can close the air
diffuser 3 and use only the vents 6
and 7.
For even air distribution, take care
not to obstruct the exterior air intake
grille located at the bottom of the
windscreen, the vents, the air out-
lets under the front seats and the air
extractor located behind the laps in
the boot.
Do not block sensors 1 and 2.
When towing a considerable load
and when the exterior temperature is
very high, the air conditioning may be
cut off temporarily if the engine cool-
ing makes this necessary.
Pull the blinds on the rear door win-
dows and the rear screen.
AUTOMATIC REGULATION OF
THE AIR CONDITIONING
The automatic regulation of the air
conditioning in the passenger com-
partment is controlled by various
sensors (exterior temperature, inte-
rior temperature, sunshine), prevent-
ing the need for you to change your
reference settings other than the
temperature displayed. In addition,
a humidity sensor anticipates the for-
mation of condensation in the vehicle
during its use.
Air diffuser
The air diffuser at the top of the cen-
tre console, signiicantly increases
the distribution and low of air and
prevents air currents while maintai-
ning an optimum temperature inside
the passenger compartment.
* According to destination.

114 -
17-05-2004
115
-
17-05-2004
Interior comfort
AUTOMATIC AIR
CONDITIONING
(MONO ZONE)
Mono zone: this is the overall regu-
lation of the temperature, distribution
and low in the passenger compart-
ment.
The symbols and messages associat-
ed with the automatic air conditioning
controls appear on the multifunction
display.
General precautions
Do not cover the temperature and
humidity sensor located to the
right of the glove box. It is used to
regulate the air conditioning.
Operate the air conditioning system
for 5 to 10 minutes once a month to
keep it in perfect working order.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Note: the condensation created by
the air conditioning system results
in a low of water under the vehicle
when stationary which is perfectly
normal. Control by the Auto program
Example with the time and date
Example with the audio equipment 1 - Comfort
program
Press the "AUTO" button. The indi-
cator light comes on. The "AUTO"
symbol is displayed on the multifunc-
tion display.
The system adjusts automatically to
the value displayed by the tempera-
ture setting. It controls the distribu-
tion, low, temperature and intake of
air in order to guarantee comfort and
an adequate circulation of air in the
passenger compartment. You do not
have to make any adjustments.

114 -
17-05-2004
115
-
17-05-2004
Interior comfort
2 - Adjustment of
the temperature
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the choice of coniguration validated
on the display.
F Press the right or left arrow to
change it.
A setting around the value 21 makes
it possible to obtain optimum com-
fort. However, depending on your
requirements, a setting between 18
and 24 is normal.
The control of the air conditioning
regulation by the auto-adaptive pro-
gram guarantees good ventilation
inside the passenger compartment.
Control via the manual
controls
It is possible to adjust one or more
functions manually.
The "AUTO" button indicator light is
switched off. 3 - The blower
Air low
F Turn the dial 3
to the right to in-
crease the air low
or to the left to re-
duce it.
The air low symbol (fan) is displayed
on the multifunction display and is
illed in in relation to the value re-
quired.
To prevent condensation and dete-
rioration of the quality of the air in
the passenger compartment, ensure
that an adequate low of air is main-
tained.
Deactivation of the air
conditioning
F Turn the dial 3 to
the left until the
low of air stops.
The "OFF" symbol is displayed on
the multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system's
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
To reactivate the air conditioning:
F Press button 1 or 2. 4 - Adjustment
of the air
distribution
Successive or continuous pressure
on button 4 enables you to direct the
low of air.
The symbol (arrows) corresponding
to the chosen direction is displayed
on the multifunction display. 5 Windscreen and front side win-
dows.
3 Front and rear ventilation.
6 Front and rear footwells.
AUTO Automatic distribution.
5 - Front visibility control
In certain atmospheric conditions,
the comfort program may not be
suficient to demist or de-ice the win-
dows (humidity, several passengers,
ice).
F In this case, select the front vis-
ibility control in order to clear the
windows quickly. The indicator
light comes on.
It controls the air low and intake and
distributes the ventilation to the wind-
screen and front side windows.
The front visibility control symbol is
displayed on the multifunction dis-
play.
Once the inconvenience has been
eliminated, pressing button 1 returns
the system to the comfort setting.

116 -
17-05-2004
117
-
17-05-2004
Interior comfort
Return to automatic control of the
air intake
Press button
1 or 6.
A message appears on the multifunc-
tion display.
When the ignition is switched off,
the settings are stored until it is
switched on again.
6 - Intake of exterior
air/
Recirculation of
interior air
This function isolates the passenger
compartment from exterior fumes
and odours.
F Press button 6 several times to
set the air intake mode, the indi-
cator light which corresponds to
the mode set comes on at your
preference:
- intake of exterior air. Forced exte- rior air intake mode.
- recirculation of the air inside the passenger compartment. Pro-
longed operation in interior air
recirculation mode may result in
the formation of condensation and
deterioration of the quality of the
interior air.
Do not drive in air recirculation mode for prolonged periods, ex-
cept in truly exceptional atmos-
pheric conditions.
The message associated with the control is displayed on the multi-
function display. 7 - Rear screen
demisting
The heated rear screen operates
independently of the air conditioning
system.
F Press button 7, with the engine
running, to demist the rear screen
and the mirrors. The indicator light
comes on.
Demisting stops automatically in re-
lation to the exterior temperature.
It may be stopped by pressing but-
ton 7 again or when the engine is
switched off but resumes when the
engine is switched on again.

116 -
17-05-2004
117
-
17-05-2004
Interior comfort
The buttons associated with the navi-
gator permit activation or deactiva-
tion of the air conditioning program. -
"CLIM" ,
- "MENU" .
Access to
the "air conditioning" menu
Via the "CLIM" button
Press the button.
The "Air conditioning" menu ap-
pears on the multifunction display.
This menu enables you to switch the
air conditioning off (AC-OFF).
Conirm by pressing the navigator -
the dial or the OK button.
Deactivation of the air
conditioning (AC-OFF)
The symbol "AC OFF" is displayed
on the multifunction display.
There is a risk that the temperature
setting value may not be reached
and you risk having condensation on
the windows.
Via the "MENU" button
Press the button.
The "General menu" appears on
the multifunction display.
Select the Air Conditioning icon us-
ing the navigator buttons. The
"Air Conditioning" main menu
appears on the multifunction display
as the main display and you have
reached the choice coniguration de-
scribed in the CLIM paragraph.
You can cancel the deactivation by
pressing the "AUTO" button or the
blower 3 on the air conditioning con-
trol panel.

118 -
17-05-2004
119
-
17-05-2004
Interior comfort
AUTOMATIC AIR
CONDITIONING (DUAL ZONE)
Dual zone: this is the differentiated
regulation of the temperature and
distribution on the driver's side and
the front passenger side.
The driver and his front passenger
can each adjust the temperature and
the distribution of the air to suit their
requirements.
The symbols and messages associat-
ed with the automatic air conditioning
controls appear on the multifunction
display.
General precautions
Do not cover the temperature and
humidity sensor located to the
right of the glove box. It is used to
regulate the air conditioning.
Operate the air conditioning system
for 5 to 10 minutes once a month to
keep it in perfect working order.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Note: the condensation created by
the air conditioning system results
in a low of water under the vehicle
when stationary which is perfectly
normal. Control by the Auto program
Example with the time and date
Example with the audio equipment 1 - Driver and
passenger
comfort
program
Press the "AUTO" button. The indi-
cator light comes on. The "AUTO"
symbol is displayed on the multifunc-
tion display.
The system adjusts automatically to
the value displayed by the tempera-
ture setting. It controls the distribu-
tion, low, temperature and intake of
air in order to guarantee comfort and
an adequate circulation of air in the
passenger compartment. You do not
have to make any adjustments.

118 -
17-05-2004
119
-
17-05-2004
Interior comfort
2 - Adjustment of the
temperature on the
driver's side
3 - Adjustment of the temperature on
the passenger side
F Press the up or down arrow to
change the temperature on the
driver's side 2 or passenger side 3.
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the choice of coniguration validated
on the display.
A setting around the value 21 makes
it possible to obtain optimum com-
fort. However, depending on your
requirements, a setting between 18
and 24 is
normal.
The control of the air conditioning
regulation by the auto-adaptive pro-
gram guarantees good ventilation
inside the passenger compartment.
Control via the manual controls
It is possible to adjust one or more
functions manually while leaving the
other functions in automatic mode.
The "AUTO" button indicator light is
switched off. 4 - The blower
Air low
F Turn dial 4 to the
right to increase
the air low or to the
left to reduce it.
F Turn the dial 4 to
the left until the
low of air stops.
The "OFF" symbol is displayed on
the multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system's
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
To reactivate the air conditioning:
F Press button 1, 2 or 3.
Deactivation of
the air conditioning
The air low symbol (fan) is displayed
on the multifunction display and is illed
in in relation to the value required.
To prevent condensation and dete-
rioration of the quality of the air in the
passenger compartment, ensure that
an adequate low of air is maintained. 5 - Adjustment of
the driver's air
distribution
Successive or continuous pressure
on button 5 or 6 enables you to direct
the low of air on the driver's side or
on the passenger side independ-
ently.
The symbol (arrows) corresponding
to the chosen direction 5 or 6 is dis-
played on the multifunction display. 5 Windscreen and front side win-
dows.
3 Front and rear ventilation.
6 Front and rear footwells.
AUTO Automatic distribution. 6 - Adjustment of
the passenger
air distribution