Peugeot 407 2005.5 User Guide

14 -
01-07-2005
15
-
01-07-2005
RT3 CONTROL KEYPADS
Keypad (2)
ESC (Escape): cancellation of the op-
eration in progress.
MENU: displaying of the general menu.
C: deletion of the last character entered
or of the entire line.
Button (A)
ON/OFF and volume adjustment.
Keypad (5)
Selection of the stored radio station .
Selection of the station stored, of the
CD depending on the position in the
CD changer.
Telephone keypad - alphanumeric
inputting keypad.
: Audio and telematics
Button (B)
CD eject.
Keypad (1)
AUDIO: access to the RT3 audio equipment displays.
TEL: access to the telephone displays.
TRIP: trip computer displays.
NAV: displaying of the navigation - guidance welcom
e
menu.
CLIM: displaying of the air conditioning settings w el-
come menu.
DARK: 1st press: black screen under the banner - 2n d
press: completely black screen - 3rd press: return to
the display.Keypad (3)
Navigator.
Keypad (4)
TEL (green): pick up an incoming
call.
LION: access to the PEUGEOT serv-
ices menu.
TEL (red): hang up. Keypad (6)
Audio - CD player controls bar.
Familiarisation

14 -
01-07-2005
15
-
01-07-2005
"PERSONALISATION-
CONFIGURATION"
MENU
Access to this menu enables you to
"deine the following vehicle para-
meters":
- permanent locking of the boot on
the 407 Saloon (OFF by default),
- automatic switching on of the lights (ON by default),
- automatic follow-me-home lighting (OFF by default),
- automatic rear wiper with reverse gear on the 407 SW (ON by de-
fault). Example 1: permanent locking of
the boot on the 407 Saloon
To activate or deactivate this func-
tion, simply follow the conirmation
windows.
In each window, make your choice
using the navigator, then conirm by
pressing the navigator.
Example 2: automatic follow-
me-home lighting
With the automatic switching on of
the lights and the follow-me-home
lighting activated (boxes ticked),
when the ignition is switched off the
side lights and dipped headlamps
remain on for the selected duration:
15 s, 30 s or 60 s.
: 36
The parameter is recorded if you click
on OK, displayed on the screen. To activate or deactivate this func-
tion, simply follow the conirmation
windows.
In each window, make your choice
using the navigator, then conirm by
pressing the navigator.
The parameter is recorded if you click
on OK, displayed on the screen.
Familiarisation

Instruments and controls16 -
01-07-2005
17Instruments and controls-
01-07-2005
1 - Coolant temperature
indicator dial.
2 - Lights on indicator lights:
dipped headlamps.
main beam headlamps.
front fog lamps.
rear fog lamps.
3 - Rev counter dial.
4 - Warning lights:
stop warning.
handbrake applied or brake luid level or electronic brake force
distribution fault.
engine oil pressure.
battery charge.
seat belts not fastened in the front.
punctured tyre.
high coolant temperature.
4-DIAL PETROL-DIESEL MANUAL GEARBOX INSTRUMENT PANEL
10 - Trip recorder zero reset and
service display button.
Note: this also permits
displaying of the trip recorder if
the cruise control/speed limiter
is activated.
11 - Display:
Total distance recorder.
Trip recorder.
Cruise control/speed limiter indicator light.
Service indicator.
Oil level indicator.
12 - Instrument panel lighting
rheostat.
4 -
Warning lights (cont.):
emission control system.
air bags.
anti-lock braking system (ABS).
service.
electronic stability control (ESP).
water in diesel ilter.
5 - Left-hand direction indicator.
6 - Right-hand direction indicator.
7 - Speedometer dial.
8 - Warning lights:
pre-heat (diesel engine starting).
fuel level.
passenger air bag disarmed.
9 - Fuel level indicator dial.

Instruments and controls16 -
01-07-2005
17Instruments and controls-
01-07-2005

Instruments and controls18 -
01-07-2005
19Instruments and controls-
01-07-2005
1 - Coolant temperature
indicator dial.
2 - Lights on indicators:
dipped headlamps.
main beam headlamps.
front fog lamps.
rear fog lamps.
3 - Rev counter dial.
4 - Warning lights:
seat belts not fastened in the front.
fuel level.
left direction indicator.
5 - Fuel level indicator dial.
5-DIAL PETROL-DIESEL MANUAL AND AUTOMATIC GEARBOX INSTRUMENT PANEL S
10 - CHECK and trip recorder zero
reset and service display button.
11 - Instrument panel display:
Total distance recorder.
Trip recorder.
Automatic gearbox lever position indicator.
Cruise control/speed limiter reference value.
Service indicator.
Direction advice (navigation).
CHECK (vehicle autotest).
Trip computer information displays.
Warning and status displays.
12 - Instrument panel lighting
rheostat.
6 -
Warning lights:
handbrake applied or brake luid level or electronic brake force
distribution fault.
right direction indicator.
7 - Speedometer dial.
8 - Warning lights:
emission control system.
anti-lock braking system (ABS).
passenger air bag disarmed.
pre-heat (diesel engine starting sequence).
9 - Engine oil temperature
indicator dial.

Instruments and controls18 -
01-07-2005
19Instruments and controls-
01-07-2005

Instruments and controls20 -
01-07-2005
21Instruments and controls-
01-07-2005
CHECK
(vehicle autotest)
In the presence of a fault
A "minor" fault has been detected:
when the CHECK OK indicator light
has been displayed, the warning
light(s) is(are) displayed.
You can start your vehicle; however,
contact a PEUGEOT dealer as soon
as possible.
A "major" fault has been detected:
the CHECK OK indicator light does
not appear and the warning light(s)
is(are) displayed.
Do not start your vehicle.
Call a PEUGEOT dealer without
delay.
* According to country.
Automatic CHECK
With the key in the ignition on posi-
tion, all of the warning lights of the
functions tested are displayed. They
are switched off after a few seconds.
At the same time, an automatic
CHECK (vehicle autotest) is carried
out.
No "major" fault has been
detected: the CHECK OK in-
dicator light is displayed after
two seconds.
You can start your vehicle. Pressing the "CHECK/000" button
on the instrument panel starts the
manual CHECK (vehicle autotest).
This function enables you to ind
out, at any time (with the key in the
ignition on position or with the engine
running):
- the warnings present,
- the status of the functions activated or deactivated (wipers, automatic
switching on of the lights).
Manual CHECK
The passenger air bag dis-
armed indicator light* re-
mains on while the air bag is
disarmed.
With the engine running and the
vehicle moving, the instrument
panel screen displays
the warning
lights (in the event of a fault).

Instruments and controls20 -
01-07-2005
21Instruments and controls-
01-07-2005
Braking system warning
light
WARNING LIGHTS
COMMON TO THE
4-DIAL AND 5-DIAL
INSTRUMENT PANELS
This indicates:
- handbrake applied or incorrectly released,
- an excessive drop in the brake luid level, in this case linked with the
STOP warning light,
- an electronic brake force distribu- tion malfunction, linked with the
STOP warning light. Seat belt warning light
When the ignition is switched on, the
warning light comes on if a front oc-
cupant has not fastened his seat belt
or if he unfastens it.
Fuel warning light
In certain driving conditions and de-
pending on the engine, the distance
which you will be able to travel with
the remaining fuel may be less than
30 miles (50 kilometres) (the capacity
of the tank is approximately 67 litres).
Emission control system
warning light
This should switch off a few seconds
after the engine is switched on.
When the engine is running, if the
warning light lashes or comes on
continuously, this indicates an emis-
sion control system malfunction.
Contact a PEUGEOT dealer as soon
as possible. Diesel engine pre-heat
warning light
Wait for the warning light to switch off
before starting. The duration of the
display is determined by the exterior
climatic conditions.
Passenger air bag
disarmed warning light*
If the warning light remains on, this
indicates that the passenger air bag
has been disarmed intentionally.
The warning light is re-
peated on the instrument
panel screen in the case
of the last 2 faults.
Stop immediately in the two latter
cases. Contact a PEUGEOT dealer. If it comes on continuously above
6 mph (10 km/h), it indicates an ABS
fault.
However, the vehicle retains conven-
tional servo-assisted braking.
Contact a PEUGEOT dealer.
Anti-lock braking system
(ABS) warning light
* According to country. The warning light is re-
peated on the instrument
panel screen.

Instruments and controls22 -
01-07-2005
23Instruments and controls-
01-07-2005
STOP warning light
If this is the only warning light which
is on, it indicates a power steering
fault.
It comes on linked with the engine oil
pressure, coolant temperature, brak-
ing system or punctured tyre warning
lights.
Stop immediately.
Contact a PEUGEOT dealer.
WARNING LIGHTS
SPECIFIC TO THE
4-DIAL INSTRUMENT
PANEL
Engine oil pressure
warning light
This indicates that the engine oil
pressure is too low.
It is linked with the STOP warning
light.
Stop immediately if it is displayed
while the engine is running.
In the case of a lack of oil in the lubri-
cation circuit, top up the oil.
Contact a PEUGEOT dealer as soon
as possible. Coolant temperature
warning light
This indicates that the engine tem-
perature is high.
It is linked with the STOP warning light.
Stop immediately.
Wait for the engine to cool
down before topping up the
level, if necessary.
Battery charge warning
light
When the engine is running, this indi-
cates a charging circuit fault (battery
terminals, alternator belt).
Contact a PEUGEOT dealer.
Punctured tyre warning
light
This indicates that one or more punc-
tured tyres have been detected.
A message on the multifunction
display indicates the wheel(s) con-
cerned.
It is linked with the STOP warning light.
Stop immediately.
Change the damaged wheel.
Have it repaired by a PEUGEOT
dealer.
The warning light remains on when
a steel wheel which does not have a
sensor is itted.
Coolant temperature indicator
When the needle is in zone A, the
temperature is correct.
When the needle is in zone B, the
temperature is too high.
If the coolant temperature warning
light comes on (linked with the STOP
warning light), stop immediately.
Wait for the engine to cool down
before topping up the level, if neces-
sary.
As the cooling circuit is pressurised,
in order to prevent any risk of scald-
ing, unscrew the cap by two turns to
allow the pressure to drop.
When the pressure has dropped, re-
move the cap and top up the level, if
necessary.
Contact a PEUGEOT dealer. Automatic CHECK
With the key in the ignition on posi-
tion, all of the warning lights tested
come on. They are switched off after
a few seconds.

Instruments and controls22 -
01-07-2005
23Instruments and controls-
01-07-2005
STOP warning light
If this is the only warning light which
is on, it indicates a power steering
fault.
It comes on linked with the engine oil
pressure, coolant temperature, brak-
ing system or punctured tyre warning
lights.
Stop immediately.
Contact a PEUGEOT dealer.
WARNING LIGHTS
SPECIFIC TO THE
4-DIAL INSTRUMENT
PANEL
Engine oil pressure
warning light
This indicates that the engine oil
pressure is too low.
It is linked with the STOP warning
light.
Stop immediately if it is displayed
while the engine is running.
In the case of a lack of oil in the lubri-
cation circuit, top up the oil.
Contact a PEUGEOT dealer as soon
as possible. Coolant temperature
warning light
This indicates that the engine tem-
perature is high.
It is linked with the STOP warning light.
Stop immediately.
Wait for the engine to cool
down before topping up the
level, if necessary.
Battery charge warning
light
When the engine is running, this indi-
cates a charging circuit fault (battery
terminals, alternator belt).
Contact a PEUGEOT dealer.
Punctured tyre warning
light
This indicates that one or more punc-
tured tyres have been detected.
A message on the multifunction
display indicates the wheel(s) con-
cerned.
It is linked with the STOP warning light.
Stop immediately.
Change the damaged wheel.
Have it repaired by a PEUGEOT
dealer.
The warning light remains on when
a steel wheel which does not have a
sensor is itted.
Coolant temperature indicator
When the needle is in zone A, the
temperature is correct.
When the needle is in zone B, the
temperature is too high.
If the coolant temperature warning
light comes on (linked with the STOP
warning light), stop immediately.
Wait for the engine to cool down
before topping up the level, if neces-
sary.
As the cooling circuit is pressurised,
in order to prevent any risk of scald-
ing, unscrew the cap by two turns to
allow the pressure to drop.
When the pressure has dropped, re-
move the cap and top up the level, if
necessary.
Contact a PEUGEOT dealer. Automatic CHECK
With the key in the ignition on posi-
tion, all of the warning lights tested
come on. They are switched off after
a few seconds.