Peugeot 407 2005.5 Service Manual

Multifunction displays34 -
01-07-2005
35Multifunction displays-
01-07-2005
Display coniguration Changing the date and timeSet the parameters one by one, us-
ing the navigator, then conirm by
clicking on "OK".
From the list displayed, select "Dis-
play coniguration" , then conirm.
From the list displayed, select "Set-
ting the date and time" , then con-
irm.
- Brightness, to be adjusted in ac- cordance with a scale between
Moon (-) and Sun (+).
- Selection of the units of measure- ment.
- Setting the date and time. Your op- erational zone is displayed on the
screen. Use the navigator to move
from one selection to another.
Your new parameters are con- irmed one by one, by pressing the
navigator button. All of the param-
eters are recorded if you click on
OK, displayed on the screen.
The ESCape button on the control pad enables you to choose not to
conirm your changes.
- Selection of the colours* (on colour display C only). From the menu, displayed on the
screen, select the icon
"Persona-
lisation-Coniguration" using the
navigator, then conirm.
* During the year.

Multifunction displays36 -
01-07-2005
37Multifunction displays-
01-07-2005
MONOCHROME DISPLAY CT
16/9 COLOUR DISPLAY
This displays the following informa-
tion:
- the time,
- the date,
- the exterior temperature (the value displayed lashes if there is a risk of
ice),
- the accesses check,
- the vehicle function status mes- sages, displayed temporarily,
- the warning displays,
- the RT3 audio equipment displays, the direct entering on the numeric
keypad of the frequency of a trans-
mitter,
- the telematic system displays (tele- phone, services, ...),
- the trip computer displays,
- the air conditioning displays,
- the satellite navigation system dis- plays.
General menu
Press the "MENU" button to gain
access to the general menu and se-
lect one of the following parameters
and functions: Navigation-Guidance,
Audio Functions, Trip Computer, Per-
sonalisation-Coniguration, Directory,
Telematics, Map*, Video* and Air
Conditioning.
The "Personalisation-Conigura-
tion" menu provides access to suc-
cessive conirmation windows. Display coniguration
- Select the colours for the 16/9 dis-
play: selection of the colours avail-
able for the display.
- Sound: selection of the sound ambience, adjustment of the voice
synthesis and voice commands.
- Brightness.
- Selection of the units of measure- ment.
* With the 16/9 colour display only.
Deine the vehicle parameters
Permits the activation or deactiva-
tion of certain driving and comfort
elements:
- permanent locking of the boot on the 407 Saloon (OFF by default),
- automatic switching on of the lights (ON by default),
- automatic "follow-me-home" light- ing (OFF by default),
- automatic rear wiping on engaging reverse gear on the 407 SW (ON by
default). Selecting the language
German, Spanish, French, English,
Italian, Dutch, Portuguese and
Brazilian Portuguese.

Multifunction displays
36 -
01-07-2005
37
Multifunction displays
-
01-07-2005
You can connect video equipment
(camcorder, digital camera, ...) to the
three video sockets, located in the
glove box.
Video display is only possible when
stationary.
Select the Video menu from the gen-
eral menu:
- "Activate video mode" to activate/
deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
contrast and the colours.
Press the "ESC" or "DARK" button to
exit from video mode.
Press the "SOURCE" button seve-
ral times in succession to select an
audio source other than that of the
video.
VIDEO MENU**
** 16/9 colour display only.

Comfort38 -
01-07-2005
39Comfort-
01-07-2005
temperature remains very high, do
not hesitate to ventilate the passen-
ger compartment for a few minutes.
For even air distribution, take care
not to obstruct the exterior air intake
grille located at the bottom of the
windscreen, the vents, the air out-
lets under the front seats and the air
extractor located behind the laps in
the boot.
In certain cases of particularly ardu-
ous use (towing the maximum load
on a steep gradient in hot weather),
cutting off the air conditioning per-
mits recovery of the engine power
and therefore improvement of the
towing capacity.
Pull the blinds on the rear door win-
dows and the rear screen.
Close the windows to beneit from
the full effectiveness of the air
conditioning. Ensure that the pas-
senger compartment ilter is in good
condition. Have the ilter elements
replaced periodically. If you drive
in a dusty environment, replace it
twice as often.
The air conditioning system does not
contain chlorine and is not harmful to
the ozone layer.
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month, to keep it in perfect working
order.The water formed by the air condi-
tioning condensation is discharged
via an opening provided for this pur-
pose. Therefore, a puddle of water
may form underneath the vehicle
when stationary.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
1.
Centre panel vents.
2. Temperature and humidity sensor.
3. Adjustment of the glove box air
low (see section "Interior layout").
4. Air outlet to passenger footwells.
5. Two ventilation vents at
the rear at the base of the
centre console between the
passengers.
6. Side vents.
7. Front windows de-icing or
demisting vents.
8. Windscreen de-icing or
demisting vents.
9. Sunshine sensor.
10. Air diffuser grille.AUTOMATIC REGULATION OF
THE AIR CONDITIONING
Use of the automatic regulation of
the air conditioning is recommended.
It permits automatic and optimised
control of all of the following func-
tions: air low, passenger compart-
ment temperature, air distribution,
economy or air recirculation mode,
by means of various sensors (exteri-
or temperature, interior temperature,
sunshine), so preventing the need
for you to change your reference set-
tings other than the value displayed.
In addition, a humidity sensor antici-
pates the formation of condensation
in the vehicle during its use.
Air diffuser
The air diffuser grille, located at
the top of the centre console, sig-
niicantly improves distribution and
lows and prevents air currents, while
maintaining an optimum temperature
inside the passenger compartment.
Do not cover the tempera-
ture and humidity sensor 2
and the sunshine sensor 9.
They are required for regula-
tion of the air conditioning.
Advice on operation
To obtain even ventilation, avoid
closing the air diffuser grille 10.
In hot weather, in order to obtain in-
tense ventilation, you can close the
air diffuser grille 10 and use vents 1
and 6 only.
If, when the vehicle has been parked
in the sun for a long time, the interior

Comfort38 -
01-07-2005
39Comfort-
01-07-2005

Comfort40 -
01-07-2005
41Comfort-
01-07-2005
AUTOMATIC AIR
CONDITIONING (MONO ZONE)
Mono zone: this is the overall regula-
tion of the temperature, distribution and
low in the passenger compartment.
The symbols and messages associat-
ed with the automatic air conditioning
controls appear on the multifunction
display.
Control by the Auto programmeAutomatic
programme -
comfort (1)
Press the "AUTO" button. The indi-
cator light comes on. The "AUTO"
symbol is displayed on the multifunc-
tion display.
Depending on the level of comfort se-
lected, the system controls the air dis-
tribution, low, temperature and intake
of air in order to guarantee comfort
and an adequate circulation of air in
the passenger compartment. You do
not have to make any adjustments.
When the engine is cold, to prevent
too great a distribution of cold air, the
ventilation will only reach its optimum
level progressively.
F Press the right or
left arrow to change
it.
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the choice of coniguration validated
on the display.
A setting around the value 21 makes
it possible to obtain optimum com-
fort. However, depending on your
requirements, a setting between 18
and 24 is usual.
Adjustment of the temperature (2)

Comfort40 -
01-07-2005
41Comfort-
01-07-2005
Control via the manual controls
It is possible to adjust one or more
functions manually, while leaving the
other functions in automatic mode.
The "AUTO" button indicator light is
switched off.
Switching to manual mode may re-
sult in discomfort (temperature, hu-
midity, odour, condensation) and is
not advantageous (comfort).
To return to automatic mode, press
the "AUTO" button. Blower (3)
Air low
F Turn the dial 3 to
the right to increase
the air low or to the
left to reduce it.
The air low symbol (fan) is displayed
on the multifunction display and is
illed in in relation to the value re-
quired.
To prevent condensation and dete-
rioration of the quality of the air in
the passenger compartment, ensure
that an adequate low of air is main-
tained.
Deactivation of the air conditioning
F Turn the dial 3 to
the left until the
low of air stops.
The "OFF" symbol is displayed on
the multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system's
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
Avoid driving for too long with the air
conditioning deactivated. Adjustment of the
air distribution (4)
Successive or continuous pressure
on button 4 enables you to direct the
low of air.
The symbol (arrows) corresponding
to the chosen direction is displayed
on the multifunction display. 5 Windscreen and front side
windows.
3 Front and rear ventilation.
6 Front and rear footwells.
AUTO Automatic distribution.
Front visibility
control (5)
In certain cases, the comfort pro-
gramme may not be suficient to de-
mist or de-ice the windows (humidity,
several passengers, ice).
F In this case, select the front visibility
programme in order to clear the
windows quickly. The indicator light
comes on.
It controls the air conditioning, air
low and intake and distributes the
ventilation to the windscreen and
front side windows.
The front visibility control symbol is dis-
played on the multifunction display.
Once the inconvenience has been
eliminated, pressing button 1 returns
the system to the comfort setting.
To reactivate the air conditioning:
F Press button 1 or 2.
On entering the vehicle, the interior
temperature may be much colder (or
warmer) than is comfortable. There is
no need to change the temperature
displayed in order to obtain rapidly
the level of comfort required.
The automatic regulation of the air
conditioning will use its maximum
performance settings to correct the
temperature difference as quickly as
possible.

Comfort42 -
01-07-2005
43Comfort-
01-07-2005
Intake of exterior
air/Recirculation of
interior air (6)
This function enables you to isolate
the passenger compartment from
exterior fumes and odours.
F Press button 6 several times to
set the air intake mode, the indi-
cator light which corresponds to
the mode set comes on at your
preference:
- intake of exterior air. Forced ex- terior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator light which corre- sponds to the mode set comes
on. Prolonged operation in
interior air recirculation mode
may result in the formation of
condensation and deterioration
of the quality of the interior air.
Do not drive in air recirculation mode for prolonged periods,
except in truly exceptional at-
mospheric conditions.
The message associated with the control is displayed on the
multifunction display.
F Press button 6 to return to auto-
matic control of the air intake.
For your comfort, when the igni-
tion is switched off, the settings
are stored until it is switched on
again. Rear screen
demisting (7)
The heated rear screen operates
independently of the air conditioning
system.
F Press button 7, with the engine
running, to demist the rear screen
and the mirrors. The indicator light
comes on.
Demisting is switched off automati-
cally to prevent an excessive con-
sumption of current and in relation to
the exterior temperature.
It may be stopped by pressing button 7
again or when the engine is switched
off.
However, demisting resumes if the
engine is switched on again within
one minute.
Switch off the rear screen and exterior
mirrors demisting when you consider
this necessary as low current consump-
tion reduces fuel consumption.

Comfort42 -
01-07-2005
43Comfort-
01-07-2005
"AIR CON" menuPress the "MENU"
button to gain access
to the general menu,
then conirm.
The "General menu" appears on
the multifunction display.
Select the Air Conditioning icon us-
ing the navigator buttons. The
"Air Conditioning" menu ap-
pears on the multifunction display as
the main display.
Deactivation of the air
conditioning (AC-OFF)
Deactivation may result in discomfort
(temperature, humidity, odour, con-
densation).
You can cancel the deactivation by
pressing the "AUTO" button or the
blower 3 on the air conditioning control
panel.
The symbol "AC OFF" is displayed on
the multifunction display.
There is a risk that the temperature
setting value may not be reached
and you risk having condensation on
the windows.Additional heating*
Vehicles which are itted with an HDI
engine may be equipped with auto-
matic additional heating to improve
your comfort.
When the engine is idling or when
the vehicle is stationary, a high-
pitched whistling noise and the emis-
sion of a small amount of smoke and
odour is normal.
* According to country.

Comfort44 -
01-07-2005
45Comfort-
01-07-2005
AUTOMATIC AIR
CONDITIONING (DUAL ZONE)
Dual zone: this is the differentiated
regulation of the temperature and air
distribution on the driver's side and
the front passenger side.
The driver and his front passenger
can each adjust the temperature and
the distribution of the air to suit their
requirements.
The symbols and messages associat-
ed with the automatic air conditioning
controls appear on the multifunction
display.
Control by the Auto programmeAutomatic
programme - driver
and passenger
comfort (1)
Press the "AUTO" button. The indi-
cator light comes on. The "AUTO"
symbol is displayed on the multifunc-
tion display.
Depending on the level of comfort se-
lected, the system controls the air dis-
tribution, low, temperature and intake
of air in order to guarantee comfort
and an adequate circulation of air in
the passenger compartment. You do
not have to make any adjustments.
When the engine is cold, to prevent
too great a distribution of cold air, the
ventilation will only reach its optimum
level progressively.
Adjustment of the
temperature on the
driver's side (2)
Adjustment of the
temperature on the
passenger side (3)
F Press the up or down arrow to
change the temperature on the
driver's side 2 or passenger side 3.
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the choice of coniguration validated
on the display.
A setting around the value 21 makes
it possible to obtain optimum com-
fort. However, depending on your
requirements, a setting between 18
and 24 is usual.