Peugeot 407 2005.5 Workshop Manual

Comfort44 -
01-07-2005
45Comfort-
01-07-2005
Blower (4)
Air lowF Turn dial 4 to the
right to increase
the air low or to
the left to reduce it.
The air low symbol (fan) is displayed
on the multifunction display and is
illed in in relation to the value re-
quired.
To prevent condensation and dete-
rioration of the quality of the air in
the passenger compartment, ensure
that an adequate low of air is main-
tained.
F Turn the dial 4 to
the left until the
low of air stops.
The "OFF" symbol is displayed on
the multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system's
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
Avoid driving for too long with the air
conditioning deactivated.
Deactivation of the air conditioning Adjustment of
the driver's air
distribution (5)
Successive or continuous pressure
on button 5 or 6 enables you to direct
the low of air on the driver's side or
on the passenger side independently.
The symbol (arrows) corresponding
to the chosen direction 5 or 6 is dis-
played on the multifunction display. 5 Windscreen and front side
windows.
3 Front and rear ventilation.
6 Front and rear footwells.
AUTO Automatic distribution. Adjustment of
the passenger air
distribution (6)
Control via the manual controls
It is possible to adjust one or more
functions manually while leaving the
other functions in automatic mode.
The "AUTO" button indicator light is
switched off.
Switching to manual mode may re-
sult in discomfort (temperature, hu-
midity, odour, condensation) and is
not advantageous (comfort).
To return to automatic mode, press
the "AUTO" button.
On entering the vehicle, the interior
temperature may be much colder (or
warmer) than is comfortable. There is
no need to change the temperature
displayed in order to obtain rapidly
the level of comfort required.
The automatic regulation of the air
conditioning will use its maximum
performance settings to correct the
temperature difference as quickly as
possible.
To reactivate the air conditioning:
F Press button 1, 2 or 3.

Comfort46 -
01-07-2005
47Comfort-
01-07-2005
Front visibility
control (7)
In certain cases, the comfort pro-
gramme may not be suficient to de-
mist or de-ice the windows (humidity,
several passengers, ice).
F In this case, select the front vis-
ibility programme in order to clear
the windows quickly. The indicator
light comes on.
It controls the air conditioning, air
low and intake and distributes the
ventilation to the windscreen and
front side windows.
The front visibility control symbol is dis-
played on the multifunction display.
Once the inconvenience has been
eliminated, pressing button 1 returns
the system to the comfort setting. Intake of exterior
air/Recirculation of
interior air (8)
This function enables you to isolate
the passenger compartment from
exterior fumes and odours.
F Press button 8 several times to
set the air intake mode, the indi-
cator light which corresponds to
the mode set comes on at your
preference:
- intake of exterior air. Forced ex- terior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator light which corre- sponds to the mode set comes
on. Prolonged operation in
interior air recirculation mode
may result in the formation of
condensation and deterioration
of the quality of the interior air.
Do not drive in air recirculation mode for prolonged periods, ex-
cept in truly exceptional atmos-
pheric conditions.
The message associated with the control is displayed on the
multifunction display.
F Press button 8 to return to auto-
matic control of the air intake.
For your comfort, when the igni-
tion is switched off, the settings
are stored until it is switched on
again. Rear screen
demisting (9)
The heated rear screen operates
independently of the air conditioning
system.
F Press button 9, with the engine
running, to demist the rear screen
and the mirrors. The indicator light
comes on.
Demisting is switched off automati-
cally to avoid an excessive consump-
tion of current and in relation to the
exterior temperature.
It may be stopped by pressing but-
ton 9 again or when the engine is
switched off.
However, the demisting resumes
if the engine is switched on again
within one minute.
Switch off the rear screen and ex-
terior mirrors demisting when you
consider this necessary as low cur-
rent consumption reduces fuel con-
sumption.

Comfort46 -
01-07-2005
47Comfort-
01-07-2005
Deactivation of the air
conditioning (AC-OFF)
Deactivation may result in discomfort
(temperature, humidity, odour, con-
densation).
You can cancel the deactivation by
pressing the "AUTO" button or the
blower 4 on the air conditioning control
panel.
Deactivation or activation of the
simultaneous Left-Right control
Activation of this function permits the
transfer of the driver's coniguration
to the passenger.
Deactivation of this function permits
a return to the independent driver/
passenger settings.
Any manual action on button 4 or 6
cancels the simultaneous conigura-
tion setting.
"AIR CON" menu
Press the "MENU"
button to gain access
to the general menu,
then conirm.
The "General menu" appears on
the multifunction display.
Select the Air Conditioning icon us-
ing the navigator buttons.
The "Air Conditioning" menu ap-
pears on the multifunction display as
the main display.
Additional heating*
Vehicles which are itted with an HDI
engine may be equipped with auto-
matic additional heating to improve
your comfort.
When the engine is idling or when
the vehicle is stationary, a high-
pitched whistling noise and the emis-
sion of a small amount of smoke and
odour is normal.
* According to country.

Comfort48 -
01-07-2005
49Comfort-
01-07-2005
EXTERIOR MIRRORS
Adjustment
F Move control A to the right or to
the left to select the corresponding
mirror.
F Direct control B in all four direc-
tions to adjust. Automatic tilting of the mirrors in
reverse gear*
This function allows you to see the
ground (kerb, wall...) when carrying
out parking manoeuvres in reverse
gear.
Objects observed in the
driver and passenger mirrors
are, in reality, closer than
they appear.
This must be taken into account in or-
der to judge the distance of vehicles
approaching from behind correctly.
Folding back the mirrors electrically
- from inside:
F With the ignition on, move the
control A to the central position
then pull it rearwards.
- from outside: F Lock the vehicle using the remote
control* or the key.
This function can be deactivated.
Contact your PEUGEOT dealer.
When the vehicle is parked, the exterior
mirrors can be folded back manually.
* According to version.
Initial setting of the function
Engage reverse gear then select and
adjust the left mirror then the right
mirror.
These settings will be stored when
the vehicle is locked.
Each remote control stores a speciic
setting.
Tilting the mirror to the parking
position
F engage reverse gear,
F move control A to the right or the
left to select the corresponding
mirror.
The exterior mirror corresponding to
the side on which you are parking
tilts downwards.
Intentional returning of the mirror to
the driving position:
F change out of reverse gear or
deselect the mirror.
The mirror returns to the driving
position automatically if the vehicle
speed exceeds 10 mph (15 km/h),
if the engine is switched off or if re-
verse gear is engaged for more than
20 seconds.

Comfort48 -
01-07-2005
49Comfort-
01-07-2005
INTERIOR MIRROR
Automatic day/
night interior mirror
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens auto-
matically depending on the intensity
of the light from behind. It clears as
the light (headlamps of following ve-
hicles, sunlight) decreases, ensuring
maximum visibility. Operation
Switch on the ignition and press
switch
1:
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other,
push or pull the lever on the lower
edge of the mirror.
Special feature
To ensure maximum visibility dur-
ing manoeuvres, the mirror clears
automatically when reverse gear is
engaged.

Comfort50 -
01-07-2005
51Comfort-
01-07-2005
MANUAL STEERING WHEEL
HEIGHT AND DEPTH
ADJUSTMENT
When the vehicle is stationary, un-
lock the steering wheel by pushing
the control forwards.
Adjust the height and depth of the
steering wheel then lock by pulling
the control fully.
ELECTRIC ADJUSTMENT OF
THE HEIGHT AND DEPTH OF
THE STEERING WHEEL*
When stationary, adjust the height or
depth of the steering wheel by mov-
ing the control: F forwards or backwards to adjust
the depth.
F up or down to adjust the height.
WELCOME FUNCTION*
When the driver's door is opened
with the ignition off, the steering
wheel rises to make access to or exit
from the vehicle easier.
You can activate or deac-
tivate this function via the
"personalisation-conigura-
tion" menu on the multi-
function display.
* During the year.

Comfort50 -
01-07-2005
51Comfort-
01-07-2005
FRONT SEATS
Manual mode
Longitudinal adjustment
Lift the control bar and slide the seat
forwards or backwards.Driver's seat cushion height and
angle adjustment
Pump up or down to the required
position.
Seat back angle adjustment
Operate the lever for your comfort.

Comfort52 -
01-07-2005
53Comfort-
01-07-2005
Electric mode
The electrical functions of the driver's
seat are deactivated one minute after
the ignition is switched off.
To reactivate them, open the door or
switch on the ignition.
Longitudinal adjustment
Push the control fowards or back-
wards to slide the seat.Driver's seat cushion height and
angle adjustment
Height:
tilt the rear of the control up
or down.
Tilt: tilt the front of the control up or
down. Seat back angle adjustment
Tilt the control forwards or backwards
for your comfort.

Comfort52 -
01-07-2005
53Comfort-
01-07-2005
Head restraint height and angle
adjustment
To raise or lower the head restraint,
pull it forwards then slide it.
To tilt the head restraint, tilt the lower
part forwards or backwards.
To remove the head restraint, move it
almost to the highest position, lift the
tab using a coin and pull it forwards
and upwards at the same time.
To reit the head restraint, engage
the stalks in the holes keeping in line
with the seat back.
Never drive with the head restraints
removed and stored in the vehicle.
This is dangerous and they may be
thrown in the event of sharp braking.
They must be in place and adjusted
correctly.
The adjustment is correct when the
top of the head restraint is aligned
with the top of the head of the occu-
pant of the seat.Front seat active head restraint
This system prevents "whiplash".
In the event of a rear impact, the
action of the body on the seat back
moves the head restraint forwards
and upwards preventing the head
from being thrown back.
Front armrest
To change the position of the armrest:
F Lift the handle 1.
The armrest folds forwards and
upwards.
To return to the initial position, push
the armrest backwards and press it
to engage.
Driver's seat lumbar adjustment
Operate the lever to obtain the cor-
rect position.
Heated seats adjustment
With the engine running, turn the
dial. The temperature of the seat is
regulated automatically.
0:
Off.
1: Low. 2:
Medium.
3: High.

Comfort54 -
01-07-2005
55Comfort-
01-07-2005
Memorising driving positions*
The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons M/1 and M/2 . Memorising using the controls on
the driver's door
To memorise:
F
Place the key in the ignition on
position,
F Adjust your seat and mirrors,
F Press button M, then button 1
"irst driving position" or button 2
"second driving position" within
four seconds.
An audible signal conirms that a
position has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
Engine off
F
Briely press button 1 or 2 to recall
the corresponding memorised
position. The end of the setting is
indicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
* During the year.
Engine running
F
Keep button 1 or 2 pressed down
until the bleep indicates that set-
ting of the corresponding memo-
rised position is complete.