Peugeot 407 2005 Owner's Manual

108 -
14-02-2005
109
-
14-02-2005
Select the "Directory" function to ac-
cess the ile in which the address you
are looking for is stored.
Select a description by scrolling
down the list by means of the navi-
gator, then conirm by pressing the
navigator. The directory ile is then
displayed.
Select the "OK"
function, then press
the navigator to access the guidance
activation function.
Follow the instructions given by the
system.
Selecting a destination stored in
the directory
Select the "Previous destinations"
function to access one of the last
twenty addresses stored.
Select a description by scrolling
down the list by means of the navi-
gator, then conirm it by pressing the
navigator. The complete address is
then displayed.
Select the "OK" function, then press
the navigator to access the guidance
activation function.
Follow the instructions given by the
system.
Selection of one of the previous
destinations
Activate the function "Divert route",
then input the distance involved in
the change required.
Select the "OK" function then vali-
date by pressing the navigator.
The system calculates the change
which is closest to the value input
and gives you the option of whether
or not to use this change.
Changing the initial route
Details of the route
You can consult the destination
address at any time by activating the
"Chosen destination"
function on the
"Navigation - Guidance" menu.
407 saloon and 407 SW comfort

110 -
14-02-2005
111
-
14-02-2005
The menu "Guidance options" pro-
vides access to the following func-
tions:
- changing of the route calculation
criteria,
- voice synthesis adjustment of guid- ance messages,
- description of the information relat- ing to the navigation CD-Rom,
- management of the addresses stored in the directory.
Guidance options
The last criterion used is displayed.
Select a criterion from the list, then
validate by pressing the navigator.
When the criterion of your choice
has been selected, select the "OK"
function then conirm by pressing the
navigator.
Calculation criteria Management of the directory
This function enables you to rename
an address stored in the directory.
Select the description correspond-
ing to the stored address to be
changed.
Select the "Rename" function, then
conirm by pressing the navigator.
Select the "OK" function, then
conirm by pressing the navigator to
record the changes made.
Adjusting the voice synthesiser
Select the type of voice "male" or
"female", after inserting the conigu-
ration CD-Rom.
Adjust the volume of the voice syn-
thesis by turning the navigator, then
validate by pressing the navigator.
Note: the volume can also be ad-
justed during a message, using the
audio/telephone button or the steer-
ing wheel control. Stopping/Resuming guidance
- "Stop guidance"
During guidance, select this function
then validate.
- "Resume guidance"
In the absence of guidance, select
this function then validate
to activate
guidance to the last destination pro-
grammed.
Note: after re-starting the engine,
a screen appears enabling you to
resume guidance activated before
the ignition was switched off.
407 saloon and 407 SW comfort

110 -
14-02-2005
111
-
14-02-2005
The contextual menu associated with
the "Navigation - Guidance" application
appears as a superimposed display,
when this is the application currently in
use in the main screen window.
This menu is limited to the following
functions:
- changing of the initial route*,
- switching to "Selection-Movement
on map" mode**,
- storing of the current location (post- al address if available or, if it is not,
the GPS co-ordinates),
-
changing of the route calculation criteria,- stopping or resuming of guidance (displaying of the message which
changes depending on the previ-
ous status).
- displaying of the map in full screen mode or reduced mode on the right
(displaying of the message which
changes depending on the previ-
ous status)**.
"Navigation - Guidance"
contextual menu
RDS TMC (Trafic Message
Channel) Trafic Information
This function enables you to access
the TMC trafic information mes-
sages broadcast free on the FM
waveband.
These messages may appear tem-
porarily as a superimposed display
or be read by the voice synthesiser
if it is active.
You can read the messages transmit-
ted by the TMC station while listening
to another station**.
In map mode**, special TMC sym-
bols are displayed in relation to the
type of information.
Select the "TMC Trafic Information"
function from the "Telematics" menu,
you can select:
- "Consult the messages" to display
the list of TMC messages available,
- "Filter the TMC information" to se- lect one or more types of message,
- "Voice synthesiser" to listen to the TMC messages received,
- "Activate/Deactivate trafic informa- tion" to display the TMC messages
received or not.
* CT monochrome screen only.
** 16/9 colour screen only.
407 saloon and 407 SW comfort

110 -
14-02-2005
111
-
14-02-2005
The contextual menu associated with
the "Navigation - Guidance" application
appears as a superimposed display,
when this is the application currently in
use in the main screen window.
This menu is limited to the following
functions:
- changing of the initial route*,
- switching to "Selection-Movement
on map" mode**,
- storing of the current location (post- al address if available or, if it is not,
the GPS co-ordinates),
-
changing of the route calculation criteria,- stopping or resuming of guidance (displaying of the message which
changes depending on the previ-
ous status).
- displaying of the map in full screen mode or reduced mode on the right
(displaying of the message which
changes depending on the previ-
ous status)**.
"Navigation - Guidance"
contextual menu
RDS TMC (Trafic Message
Channel) Trafic Information
This function enables you to access
the TMC trafic information mes-
sages broadcast free on the FM
waveband.
These messages may appear tem-
porarily as a superimposed display
or be read by the voice synthesiser
if it is active.
You can read the messages transmit-
ted by the TMC station while listening
to another station**.
In map mode**, special TMC sym-
bols are displayed in relation to the
type of information.
Select the "TMC Trafic Information"
function from the "Telematics" menu,
you can select:
- "Consult the messages" to display
the list of TMC messages available,
- "Filter the TMC information" to se- lect one or more types of message,
- "Voice synthesiser" to listen to the TMC messages received,
- "Activate/Deactivate trafic informa- tion" to display the TMC messages
received or not.
* CT monochrome screen only.
** 16/9 colour screen only.
407 saloon and 407 SW comfort

112 -
14-02-2005
113
-
14-02-2005
Filtering the TMC messages
A "Zoom" function enables you to
enlarge the map, in accordance with
the thirteen preset levels relating to
the following scales:
- 50 m/cm, 100 m/cm, 150 m/cm,
200 m/cm, 500 m/cm,
- 1 km/cm, 2 km/cm, 5 km/cm,
- 10 km/cm, 20 km/cm, 50 km/cm,
- 100 km/cm, 200 km/cm.
This is achieved by turning the
navigator.
This mode permits:
- displaying of the vehicle on the map with the route proposed by the
navigation if the guidance is active,
- zooming in on the map in accordance with the thirteen preset
levels,
- displaying of the "Navigation - Gui- dance" contextual menu.
"Vehicle following on map" mode
** 16/9 colour screen only.General notes on the "Map"
application**
The "Map"
application has two dis-
play modes:
- "Vehicle following on map" mode, representing active guidance on
the map on the right and a large-
scale view of the next intersection
on the left,
- "Selection-Movement on map" mode, representing consultation
of the map in full screen mode or
reduced mode on the right with a
compass on the left.
To switch from one mode to the
other, press the dial briely, then se-
lect the "Move on map" or "Exit map
mode" function.
You can see symbols, representing
the various types of services which
exist, sorted by category:
- "Administration and safety" symbol on a grey background,
- "Hotels, bars and restaurants" sym- bol on a yellow background,
- "Other businesses" symbol on a purple background,
- "Culture, tourism and entertain- ment" symbol on a white back-
ground,
- "Sports centres and open air centres" symbol on a green back-
ground,
- "Transporation and automobiles" symbol on a blue background.
To ilter these messages, select the
"Filter TMC information" function
from the "TMC Trafic Information"
menu, you then have:
- "Filter by route" to obtain the mes-sages relating to the current guid-
ance path,
- "Filter by event" to display the mes- sages relating solely to accidents
or trafic jams,
- "Geographical ilter" to take into ac- count the messages within a radius
of action to be deined around the
vehicle and/or a location.
You can ilter these messages using
one or more ilters at the same time.
407 saloon and 407 SW comfort

112 -
14-02-2005
113
-
14-02-2005
From the general menu, the main
"Map" menu offers various options
for guidance management:
- switching to "Selection-Movement
on map" mode,
- direction of the map towards the North or in the direction of the
vehicle,
- recentring of the map around the vehicle,
- opening of the services selection windows visible on the map, such
as hotels, service stations, etc.
- displaying of the window for enter- ing the description for recording the
current position of the vehicle in a
directory ile.
Map
This mode permits:
- selection of any point on the map to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS co-ordinates),
- movement on the map by means of the four directional arrows, rep-
resenting the four cardinal points
(North, East, South, West),
- zooming in on the map in accordance with the thirteen preset
levels,
- displaying of the "Map" contextual
menu.
"Selection-Movement on map"
mode
The contextual menu associated with
the "Map" application and with the
"Selection-Movement on map" mode
appears as a superimposed display,
when these are in use in the main
screen window.
This menu is limited to the following
functions:
- displaying of the information on the location selected on the map,
- selection of a location on the map as a destination,
- storing of the location selected (postal address if available or, if it is
not, GPS co-ordinates, so that they
can be recorded in a directory ile),
- switching to "Vehicle following on map" mode.
"Map" contextual menu
407 saloon and 407 SW comfort

116 -
14-02-2005
117
-
14-02-2005
Advice on operation
To obtain even ventilation, avoid
closing the air diffuser grille
10.
If, when the vehicle has been parked
in the sun for a long time, the interior
temperature remains very high, do
not hesitate to ventilate the passen-
ger compartment for a few minutes.
For even air distribution, take care
not to obstruct the exterior air intake
grille located at the bottom of the
windscreen, the vents, the air out-
lets under the front seats and the air
extractor located behind the laps in
the boot.
Do not block sensors 2 and 9.
When towing a trailer with a consid-
erable load and when the exterior
temperature is very high, the air con-
ditioning may be cut off temporar-
ily if the engine cooling makes this
necessary.
Pull the blinds on the rear door
windows and the rear screen.
Close the windows to beneit from
the full effectiveness of the air
conditioning. 1.
Centre panel vents.
2. Temperature and humidity
sensor.
3. Adjustment of the glove box
air low (see section "Interior
layout").
4. Air outlet to passenger
footwells.
5. Two ventilation vents at
the rear at the base of the
centre console between the
passengers.
6. Side vents.
7. Front windows de-icing or
demisting vents.
8. Windscreen de-icing or
demisting vents.
9. Sunshine sensor.
10. Air diffuser grille.
AUTOMATIC REGULATION
OF THE AIR CONDITIONING
Use of the automatic regulation of
the air conditioning is recommended.
It permits automatic and optimised
control of all of the following func-
tions: air low, passenger compart-
ment temperature, air distribution,
economy or air recirculation mode,
by means of various sensors (exteri-
or temperature, interior temperature,
sunshine), so preventing the need
for you to change your reference set-
tings other than the value displayed.
In addition, a humidity sensor antici-
pates the formation of condensation
in the vehicle during its use.
Air diffuser
The air diffuser grille, located at the
top of the centre console, signiicantly
improves distribution and lows
and prevents air currents, while
maintaining an optimum temperature
inside the passenger compartment.
When the engine is cold, to
prevent too great a distribu-
tion of cold air, the ventilation
will only reach its optimum
level progressively.
On entering the vehicle, the interior
temperature may be much colder (or
warmer) than is comfortable. There
is no need to change the tempera-
ture displayed in order to obtain the
comfort required rapidly.
The automatic regulation of the air
conditioning will use its maximum
performance settings to correct the
temperature difference as quickly as
possible.
407 saloon and 407 SW comfort

116 -
14-02-2005
117
-
14-02-2005
407 saloon and 407 SW comfort

118 -
14-02-2005
119
-
14-02-2005
AUTOMATIC AIR
CONDITIONING (MONO ZONE)
Mono zone:
this is the overall regu-
lation of the temperature, distribution
and low in the passenger compart-
ment.
The symbols and messages associated
with the automatic air conditioning
controls appear on the multifunction
display.
General precautions
Do not cover the temperature and
humidity sensor located to the
right of the glove box. It is used to
regulate the air conditioning.
Operate the air conditioning system
for 5 to 10 minutes once a month to
keep it in perfect working order.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Note: the condensation created by
the air conditioning system results
in a low of water under the vehicle
when stationary which is perfectly
normal. Control by the Auto programme
Automatic
programme -
comfort (1)
Press the "AUTO" button. The indi-
cator light comes on. The "AUTO"
symbol is displayed on the multifunc-
tion display.
The system adjusts automatically to
the value displayed.
It controls the distribution, low, tem-
perature and intake of air in order to
guarantee comfort and an adequate
circulation of air in the passenger
compartment. You do not have to
make any adjustments.
407 saloon and 407 SW comfort

118 -
14-02-2005
119
-
14-02-2005
Adjustment of the
temperature (2)
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the choice of coniguration validated
on the display.
F Press the right or left arrow to
change it.
A setting around the value 21 makes
it possible to obtain optimum com-
fort. However, depending on your
requirements, a setting between 18
and 24 is normal.
The control of the air conditioning
regulation by the auto-adaptive pro-
gramme guarantees good ventilation
inside the passenger compartment.
Control via the manual
controls
It is possible to adjust one or more
functions manually.
The "AUTO" button indicator light is
switched off.
Switching to manual mode may re-
sult in discomfort (temperature, hu-
midity, odour, condensation) and is
not advantageous (comfort).
To return to automatic mode, press
the "AUTO" button. The blower (3)
Air low
F Turn the dial 3 to
the right to increase
the air low or to the
left to reduce it.
The air low symbol (fan) is displayed
on the multifunction display and is
illed in in relation to the value re-
quired.
To prevent condensation and dete-
rioration of the quality of the air in
the passenger compartment, ensure
that an adequate low of air is main-
tained.
Deactivation of the air
conditioning
F Turn the dial 3 to
the left until the
low of air stops.
The "OFF" symbol is displayed on
the multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system’s
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
To reactivate the air conditioning:
F Press button 1 or 2. Adjustment of the
air distribution (4)
Successive or continuous pressure
on button 4 enables you to direct the
low of air.
The symbol (arrows) corresponding
to the chosen direction is displayed
on the multifunction display. 5 Windscreen and front side win-
dows.
3 Front and rear ventilation.
6 Front and rear footwells.
AUTO Automatic distribution.
Front visibility
control (5)
In certain atmospheric conditions,
the comfort programme may not be
suficient to demist or de-ice the win-
dows (humidity, several passengers,
ice).
F In this case, select the front vis-
ibility control in order to clear the
windows quickly. The indicator
light comes on.
It controls the air low and intake and
distributes the ventilation to the wind-
screen and front side windows.
The front visibility control symbol
is displayed on the multifunction
display.
Once the inconvenience has been
eliminated, pressing button 1 returns
the system to the comfort setting.
407 saloon and 407 SW comfort