Peugeot 407 2006 Service Manual

3COMFORT
40
AUTOMATIC AIR
CONDITIONING (MONO ZONE)
Mono zone: this is the overall
regulation of the temperature,
distribution and flow in the passenger
compartment.
The symbols and messages associated
with the automatic air conditioning
controls appear on the multifunction
display.
Control by the Auto programmeAutomatic
programme -
comfort (1)
Press the "AUTO" button. The indicator
light comes on. The "AUTO" symbol is
displayed on the multifunction display.
Depending on the level of comfort
selected, the system controls the air
distribution, flow, temperature and
intake of air in order to guarantee
comfort and an adequate circulation of
air in the passenger compartment. You
do not have to make any adjustments.
 Press the right or left
arrow to change it.
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the choice of configuration validated
on the display.
A setting around the value 21
makes it possible to obtain optimum
comfort. However, depending on your
requirements, a setting between 18
and 24 is usual.
Adjustment of the temperature (2)
When the engine is cold, to
prevent too great a distribution
of cold air, the ventilation will
only reach its optimum level
progressively.

3COMFORT
41
Control via the manual controls
It is possible to adjust one or more
functions manually, while leaving the
other functions in automatic mode.
The "AUTO" button indicator light is
switched off.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and is not
advantageous (comfort).
To return to automatic mode, press the
"AUTO" button. Blower (3)
Air flow
 Turn the dial 3 to the
right to increase the
air flow or to the left
to reduce it.
The air flow symbol (fan) is displayed
on the multifunction display and is filled
in in relation to the value required.
To prevent condensation and
deterioration of the quality of the
air in the passenger compartment,
ensure that an adequate flow of air is
maintained.
Deactivation of the air conditioning
 Turn the dial 3 to the
left until the flow of air
stops.
The "OFF" symbol is
displayed on the multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system’s
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
Avoid driving for too long with the air
conditioning deactivated. Adjustment of the air
distribution (4)
Successive or continuous pressure on
button 4 enables you to direct the flow
of air.
The symbol (arrows) corresponding to
the chosen direction is displayed on
the multifunction display.  Windscreen and front side
windows.
 Front and rear ventilation.
 Front and rear footwells.
AUTO Automatic distribution.
Front visibility
control (5)
In certain cases, the comfort
programme may not be sufficient to
demist or de-ice the windows (humidity,
several passengers, ice).
 In this case, select the front visibility
programme in order to clear the
windows quickly. The indicator light
comes on.
It controls the air conditioning, air
flow and intake and distributes the
ventilation to the windscreen and front
side windows.
The front visibility control symbol is
displayed on the multifunction display.
Once the inconvenience has been
eliminated, pressing button 1 returns
the system to the comfort setting.
To reactivate the air conditioning:
 Press button 1 or 2.
On entering the vehicle, the
interior temperature may
be much colder (or warmer)
than is comfortable. There is
no need to change the temperature
displayed in order to obtain rapidly the
level of comfort required.
The automatic regulation of the air
conditioning will use its maximum
performance settings to correct the
temperature difference as quickly as
possible.

3COMFORT
42
Intake of exterior
air/Recirculation of
interior air (6)
This function enables you to isolate the
passenger compartment from exterior
fumes and odours.
 Press button 6 several times to set
the air intake mode, the indicator
light which corresponds to the mode
set comes on at your preference:
- intake of exterior air. Forced exterior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator light which corresponds to the mode set
comes on. Prolonged operation
in interior air recirculation mode
may result in the formation of
condensation and deterioration
of the quality of the interior air.
Do not drive in air recirculation mode for prolonged periods,
except in truly exceptional
atmospheric conditions.
The message associated with the control is displayed on the
multifunction display.
 Press button 6 to return to automatic
control of the air intake.
For your comfort, when the ignition
is switched off, the settings are
stored until it is switched on again. Rear screen
demisting (7)
The heated rear screen operates
independently of the air conditioning
system.
 Press button 7, with the engine
running, to demist the rear screen
and the mirrors. The indicator light
comes on.
Demisting is switched off automatically
to prevent an excessive consumption
of current and in relation to the exterior
temperature.
It may be stopped by pressing button 7
again or when the engine is switched
off.
However, demisting resumes if the
engine is switched on again within one
minute.
Switch off the rear screen and
exterior mirrors demisting when
you consider this necessary as low
current consumption reduces fuel
consumption.

3COMFORT
43
"AIR CON" menuPress the "MENU"
button to gain access to
the general menu, then
confirm.
The "General menu" appears on the
multifunction display.
Select the Air Conditioning icon using
the navigator buttons. The
"Air Conditioning" menu
appears on the multifunction display
as the main display.
Deactivation of the air conditioning
(AC-OFF)Additional heating*
Vehicles which are fitted with an
HDI engine may be equipped with
automatic additional heating to
improve your comfort.
When the engine is idling or when the
vehicle is stationary, a high-pitched
whistling noise and the emission of a
small amount of smoke and odour is
normal.
* According to country.
Deactivation may result in discomfort
(temperature, humidity, odour,
condensation).
You can cancel the deactivation by
pressing the
"AUTO" button or the
blower 3 on the air conditioning control
panel.
The symbol "AC OFF" is displayed on
the multifunction display.
There is a risk that the temperature
setting value may not be reached and
you risk having condensation on the
windows.

3COMFORT
44
AUTOMATIC AIR
CONDITIONING (DUAL ZONE)
Dual zone: this is the differentiated
regulation of the temperature and air
distribution on the driver’s side and the
front passenger side.
The driver and his front passenger
can each adjust the temperature and
the distribution of the air to suit their
requirements.
The symbols and messages associated
with the automatic air conditioning
controls appear on the multifunction
display.
Control by the Auto programmeAutomatic
programme - driver
and passenger
comfort (1)
Press the "AUTO" button. The indicator
light comes on. The "AUTO" symbol is
displayed on the multifunction display.
Depending on the level of comfort
selected, the system controls the air
distribution, flow, temperature and
intake of air in order to guarantee
comfort and an adequate circulation
of air in the passenger compartment.
You do not have to make any
adjustments.
Adjustment of the
temperature on the driver’s
side (2)
Adjustment of the
temperature on the
passenger side (3)
 Press the up or down arrow to
change the temperature on the dri-
ver’s side 2 or passenger side 3.
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the choice of configuration validated
on the display.
A setting around the value 21
makes it possible to obtain optimum
comfort. However, depending on
your requirements, a setting between
18 and 24 is usual.
When the engine is cold, to
prevent too great a distribution
of cold air, the ventilation will
only reach its optimum level
progressively.

3COMFORT
45
Blower (4)
Air flow Turn dial 4 to the
right to increase the
air flow or to the left
to reduce it.
The air flow symbol (fan) is displayed
on the multifunction display and is filled
in in relation to the value required.
To prevent condensation and
deterioration of the quality of the
air in the passenger compartment,
ensure that an adequate flow of air is
maintained.
 Turn the dial 4 to the
left until the flow of
air stops.
The "OFF" symbol is displayed on the
multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system’s
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
Avoid driving for too long with the air
conditioning deactivated.
Deactivation of the air conditioning Adjustment of
the driver’s air
distribution (5)
Successive or continuous pressure on
button 5 or 6 enables you to direct the
flow of air on the driver’s side or on the
passenger side independently.
The symbol (arrows) corresponding to
the chosen direction 5 or 6 is displayed
on the multifunction display.  Windscreen and front side
windows.
 Front and rear ventilation.
 Front and rear footwells.
AUTO Automatic distribution. Adjustment of
the passenger air
distribution (6)
Control via the manual controls
It is possible to adjust one or more
functions manually while leaving the
other functions in automatic mode.
The "AUTO" button indicator light is
switched off.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and is not
advantageous (comfort).
To return to automatic mode, press the
"AUTO" button.
On entering the vehicle, the
interior temperature may
be much colder (or warmer)
than is comfortable. There is
no need to change the temperature
displayed in order to obtain rapidly the
level of comfort required.
The automatic regulation of the air
conditioning will use its maximum
performance settings to correct the
temperature difference as quickly as
possible.
To reactivate the air conditioning:
 Press button 1, 2 or 3.

3COMFORT
46
Front visibility
control (7)
In certain cases, the comfort
programme may not be sufficient to
demist or de-ice the windows (humidity,
several passengers, ice).
 In this case, select the front visibility
programme in order to clear the
windows quickly. The indicator light
comes on.
It controls the air conditioning, air
flow and intake and distributes the
ventilation to the windscreen and front
side windows.
The front visibility control symbol is
displayed on the multifunction display.
Once the inconvenience has been
eliminated, pressing button 1 returns
the system to the comfort setting. Intake of exterior
air/Recirculation of
interior air (8)
This function enables you to isolate the
passenger compartment from exterior
fumes and odours.
 Press button 8 several times to set
the air intake mode, the indicator
light which corresponds to the mode
set comes on at your preference:
- intake of exterior air. Forced exterior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator light which corresponds to the mode set
comes on. Prolonged operation
in interior air recirculation mode
may result in the formation of
condensation and deterioration
of the quality of the interior air.
Do not drive in air recirculation mode for prolonged periods,
except in truly exceptional
atmospheric conditions.
The message associated with the control is displayed on the
multifunction display.
 Press button 8 to return to automatic
control of the air intake.
For your comfort, when the ignition
is switched off, the settings are
stored until it is switched on again. Rear screen
demisting (9)
The heated rear screen operates
independently of the air conditioning
system.
 Press button 9, with the engine
running, to demist the rear screen
and the mirrors. The indicator light
comes on.
Demisting is switched off automatically
to avoid an excessive consumption of
current and in relation to the exterior
temperature.
It may be stopped by pressing button 9
again or when the engine is switched
off.
However, the demisting resumes if the
engine is switched on again within one
minute.
Switch off the rear screen and
exterior mirrors demisting when
you consider this necessary as low
current consumption reduces fuel
consumption.

3COMFORT
47
Deactivation of the air conditioning
(AC-OFF)
Deactivation or activation of the
simultaneous Left-Right control
Activation of this function permits the
transfer of the driver’s configuration to
the passenger.
Deactivation of this function permits
a return to the independent driver/
passenger settings.
Any manual action on button 4 or 6
cancels the simultaneous configuration
setting.
"AIR CON" menu
Press the "MENU"
button to gain access to
the general menu, then
confirm.
The "General menu" appears on the
multifunction display.
Select the Air Conditioning icon using
the navigator buttons.
The "Air Conditioning" menu
appears on the multifunction display
as the main display.Additional heating*
Vehicles which are fitted with an
HDI engine may be equipped with
automatic additional heating to
improve your comfort.
When the engine is idling or when the
vehicle is stationary, a high-pitched
whistling noise and the emission of a
small amount of smoke and odour is
normal.
* According to country.
Deactivation may result in discomfort
(temperature, humidity, odour,
condensation).
You can cancel the deactivation by
pressing the
"AUTO" button or the
blower 4 on the air conditioning control
panel.

3COMFORT
48
EXTERIOR MIRRORSAutomatic tilting of the mirrors in
reverse gear*
This function allows you to see the
ground (kerb, wall...) when carrying
out parking manoeuvres in reverse
gear.Objects observed in the driver
and passenger mirrors are,
in reality, closer than they
appear.
This must be taken into account in
order to judge the distance of vehicles
approaching from behind correctly.
Folding back the mirrors
electrically
- from inside:
 With the ignition on, move the
control A to the central position
then pull it rearwards.
- from outside:  Lock the vehicle using the remote
control* or the key.
This function can be deactivated. Contact your PEUGEOT dealer.
When the vehicle is parked, the exterior
mirrors can be folded back manually.
* According to version. Initial setting of the function
Engage reverse gear then select and
adjust the left mirror then the right
mirror.
These settings will be stored when the
vehicle is locked.
Each remote control stores a specific
setting.
Tilting the mirror to the parking
position

engage reverse gear,
 move control A to the right or the
left to select the corresponding
mirror.
The exterior mirror corresponding to
the side on which you are parking tilts
downwards.
Intentional returning of the mirror to
the driving position:
 change out of reverse gear or
deselect the mirror.
The mirror returns to the driving
position automatically if the vehicle
speed exceeds 10 mph (15 km/h),
if the engine is switched off or if
reverse gear is engaged for more than
20 seconds.
Adjustment

Move control A to the right or to
the left to select the corresponding
mirror.
 Direct control B in all four directions
to adjust.

3COMFORT
49
INTERIOR MIRROROperation
Switch on the ignition and press
switch 1:
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic system
off. The mirror remains at its most
clear.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror. Special feature
To ensure maximum visibility
during manoeuvres, the mirror
clears automatically when
reverse gear is engaged.
Automatic day/
night interior mirror
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the glass
of the mirror darkens automatically
depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles,
sunlight) decreases, ensuring
maximum visibility.