Peugeot 407 2007 Owner's Guide

2
32
MONOCHROME DISPLAY C
(without RD4 audio equipment)*
Presentation
It displays the following information:
- the time,- the date,- the exterior temperature (the value displayed flashes if there is a risk of ice),- the accesses check,- the vehicle function status messages, displayed temporarily,- the warning messages,- the trip computer displays,- the vehicle parameters,- the air conditioning displays,- the choice of language.
Parameter configuration
There are four display control buttons:
- "MENU" to display the general menu,- "MODE" to change the permanent application,- "ESC" to abandon the operation in progress,- Rotation of the navigator: movement on the display or changing of a setting,- Press on the navigator: confirmation of the selection.
General menu
"Personalisation-Configuration" menu
* According to country.
Press the "MENU" button to access the general menu:
- trip computer (see corresponding section),- personalisation-configuration,- air conditioning (see corresponding section).Turn the navigator to select the menu required, then confirm by pressing the navigator.
Once this menu has been selected, you can access the following functions:
- define the vehicle parameters,- display configuration,- choice of language.

2
33
Define the vehicle parameters
Once this menu has been selected, you can activate or deactivate the fol-lowing equipment:
- wiper linked with reverse gear,- automatic switching on of the lights,- "follow-me-home" lighting and duration,- audible rear parking assistance.
Example: "Duration of "follow-me-home" lighting"
Display configuration
Once this menu has been selected, you can access the following settings:
- brightness-video setting,- date and time setting,- selection of the units.
Choice of language
Once this menu has been selected, you can change the language used on the display (German, Spanish, French, English, Italian, Dutch, Portuguese, Brazilian Portuguese).
Once you have selected a setting, turn the navigator to change its value.
Press the navigator to confirm and record the modified data.

2
34
MONOCHROME DISPLAY C
AND COLOUR DISPLAY C*
This displays the following information:
- the time,- the date,- the exterior temperature (the value displayed flashes if there is a risk of ice),- the accesses check,- the vehicle function status messages, displayed temporarily,- the warning displays,- the RD4 audio equipment displays,- the trip computer displays,- the vehicle parameters,- the air conditioning displays,- the choice of language.
General menuDefine the vehicle parameters
Permits the activation or deactivation of certain driving and comfort elements.
Example: Automatic switching on of the lights.
Press the "MENU" button to gain access to the general menu and select one of the following functions: Audio Functions, Trip Computer, Per-sonalisation/Configuration and Air Conditioning.
Example: display selected on "Audio Functions".
The "Personalisation-Configuration"menu provides access to successive confirmation windows.
Management of the displays
The "AUDIO", "TRIP" and "CLIM"buttons on the RD4 audio equipment keypad permit displaying in the main window (on the right).
Example: TRIP
Choice of language
German, Spanish, French, English, Italian, Dutch, Portuguese and Brazil-ian Portuguese.
* During the year.

2
35
Display configurationChanging the date and timeSet the parameters one by one, using the navigator, then confirm by clicking on "OK".
From the list displayed, select "Dis-play configuration",then confirm.
From the list displayed, select "Setting the date and time", then confirm.
- Brightness, to be adjusted in accord-ance with a scale between Moon (-) and Sun (+).- Selection of the units of measurement.- Setting the date and time. Your operational zone is displayed on the screen. Use the navigator to move from one selection to another. Your new parameters are confirmed one by one, by pressing the navi-gator button. All of the parameters are recorded if you click on OK, dis-played on the screen. The ESCape button on the control pad enables you to choose not to confirm your changes.- Selection of the colours* (on colour display C only).
From the menu, displayed on the screen, select the icon "Personalisa-tion-Configuration" using the navi-gator, then confirm.
* During the year.

2
36
16/9 COLOUR DISPLAY
This displays the following information:
- the time,- the date,- the exterior temperature (the value displayed flashes if there is a risk of ice),- the accesses check,- the vehicle function status messages, displayed temporarily,- the warning displays,- the RT4 audio equipment displays, the direct entering on the numeric keypad of the frequency of a trans-mitter,- the telematic system displays (tele-phone, services, ...),- the trip computer displays,- the air conditioning displays,- the satellite navigation system dis-plays.
General menu
Display configuration
Press the "MENU" button to gain ac-cess to the general menu and select one of the following functions: Naviga-tion - Guidance, Map, Traffic Informa-tion, Audio Functions, Telematics, Con-figuration, Video, Vehicle Diagnostics and Air Conditioning.
The "Configuration" menu provides access to the following functions:
- Display configuration,- Sound,- Choice of language,- Define the vehicle parameters.
- Choose colour,- Adjust brightness,- Adjust date and time,- Choose units.
Define the vehicle parameters
Permits the activation or deactivation of certain driving and comfort ele-ments:
- permanent locking of the boot on the 407 Saloon,- automatic switching on of the lights,- automatic "follow-me-home" lighting,- automatic rear wiping on engaging reverse gear on the 407 SW.

2
37
You can connect video equipment (camcorder, digital camera, ...) to the three video sockets, located in the glove box.
Video display is only possible when stationary.
Select the Video menu from the general menu:
- "Activate video mode" to activate/deactivate the video,- "Video parameters" to set the display format, the brightness, the contrast and the colours.
Press the "ESC" or "DARK" button to exit from video mode.
Press the "SOURCE" button several times in succession to select an audio source other than that of the video.
VIDEO MENU

3
38
For even air distribution, take care not to obstruct the exterior air intake grille located at the bottom of the wind-screen, the vents, the air outlets under the front seats and the air extractor lo-cated behind the flaps in the boot.
In certain cases of particularly arduous use (towing the maximum load on a steep gradient in hot weather), cutting off the air conditioning permits reco-very of the engine power and therefore improvement of the towing capacity.
Close the windows to benefit from the full effectiveness of the air conditioning.
Ensure that the passenger compart-ment filter is in good condition. Have the filter elements replaced periodical-ly. If you drive in a dusty environment, replace it twice as often.
The air conditioning system does not contain chlorine and is not harmful to the ozone layer.
Operate the air conditioning system for 5 to 10 minutes, once or twice a month, to keep it in perfect working order.
The water formed by the air conditioning condensation is discharged via an ope-ning provided for this purpose. Therefore, a puddle of water may form underneath the vehicle when stationary.
If the system does not produce cold air, do not use it and contact your PEUGEOT dealer.
1. Centre panel vents.
2. Temperature and humidity sensor.
3. Adjustment of the glove box air flow (see section "Interior layout").
4. Air outlet to passenger footwells.
5. Two ventilation vents at the rear at the base of the centre console between the passengers.
6. Side vents.
7. Front windows de-icing or demisting vents.
8. Windscreen de-icing or demisting vents.
9. Sunshine sensor.
10. Air diffuser grille.
AUTOMATIC REGULATION OF
THE AIR CONDITIONING
Use of the automatic regulation of the air conditioning is recommended. It permits automatic and optimised con-trol of all of the following functions: air flow, passenger compartment temper-ature and air distribution, by means of various sensors (exterior temperature, interior temperature, sunshine), so preventing the need for you to change your reference settings other than the value displayed. In addition, a humid-ity sensor anticipates the formation of condensation in the vehicle during its use.
Air diffuser
The air diffuser grille, located at the top of the centre console, significantly improves distribution and flows and prevents air currents, while maintain-ing an optimum temperature inside the passenger compartment.
Do not cover the temperature and hu-midity sensor 2 and the sunshine sen-sor 9.
They are required for regulation of the air conditioning.
Advice on operation
To obtain even ventilation, avoid closing the air diffuser grille 10.
In hot weather, in order to obtain in-tense ventilation, you can close the air diffuser grille 10 and use vents 1 and 6 only.
If, when the vehicle has been parked in the sun for a long time, the interior temperature remains very high, do not hesitate to ventilate the passenger compartment for a few minutes.

3
39

3
40
AUTOMATIC AIR
CONDITIONING (MONO ZONE)
Mono zone: this is the overall regu-lation of the temperature, distribution and flow in the passenger compart-ment.
The symbols and messages associat-ed with the automatic air conditioning controls appear on the multifunction display.
Control by the Auto programme
Automatic programme - comfort (1)
Press the "AUTO" button. The indicator light comes on. The "AUTO" symbol is displayed on the multifunction display.
Depending on the level of comfort se-lected, the system controls the air dis-tribution, flow, temperature and intake of air in order to guarantee comfort and an adequate circulation of air in the passenger compartment. You do not have to make any adjustments.
 Press the right or left arrow to change it.
The value indicated on the display cor-responds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit, depending on the choice of configuration validated on the dis-play.
A setting around the value 21 makes it possible to obtain optimum comfort. However, depending on your require-ments, a setting between 18 and 24 is usual.
Adjustment of the temperature (2)
When the engine is cold, to prevent too great a distribution of cold air, the ventilation will only reach its optimum level progressively.

3
41
Control via the manual controls
It is possible to adjust one or more functions manually, while leaving the other functions in automatic mode.
The "AUTO" button indicator light is switched off.
Switching to manual mode may result in discomfort (temperature, humidity, odour, condensation) and is not ad-vantageous (comfort).
To return to automatic mode, press the "AUTO" button.
Blower (3)
Air flow
 Turn the dial 3 to the right to increase the air flow or to the left to reduce it.
The air flow symbol (fan) is displayed on the multifunction display and is filled in in relation to the value required.
To prevent condensation and dete-rioration of the quality of the air in the passenger compartment, ensure that an adequate flow of air is maintained.
Deactivation of the air conditioning
 Turn the dial 3 to the left until the flow of air stops.
The "OFF" symbol is displayed on the multifunction display.
This action switches off the display and the indicator lights.
It deactivates all of the system’s func-tions, with the exception of the rear screen demisting.
The temperature-related comfort is no longer controlled (temperature, humid-ity, odour, condensation).
Avoid driving for too long with the air conditioning deactivated.
Adjustment of the air distribution (4)
Successive or continuous pressure on button 4 enables you to direct the flow of air.
The symbol (arrows) corresponding to the chosen directionis displayed on the multifunction display.
 Windscreen and front side windows.
 Front and rear ventilation.
 Front and rear footwells.
AUTO Automatic distribution.
Front visibility control (5)
In certain cases, the comfort pro-gramme may not be sufficient to de-mist or de-ice the windows (humidity, several passengers, ice).
 In this case, select the front visibil-ity programme in order to clear the windows quickly. The indicator light comes on.
It controls the air conditioning, air flow and intake and distributes the ventila-tion to the windscreen and front side windows.
The front visibility control symbol is displayed on the multifunction display.
Once the inconvenience has been eliminated, pressing button 1 returns the system to the comfort setting.To reactivate the air conditioning:
 Press button 1 or 2.
On entering the vehicle, the interior temperature may be much colder (or warmer) than is comfortable. There is no need to change the temperature dis-played in order to obtain rapidly the level of comfort required.
The automatic regulation of the air conditioning will use its maximum per-formance settings to correct the tem-perature difference as quickly as pos-sible.