Peugeot 407 2007 Service Manual

3
42
Intake of exterior air/Recirculation of interior air (6)
This function enables you to isolate the passenger compartment from ex-terior fumes and odours.
 Press button 6 several times to set the air intake mode, the indica-tor light which corresponds to the mode set comes on at your prefer-ence:
- intake of exterior air. Forced ex-terior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator light which corre-sponds to the mode set comes on. Prolonged operation in inte-rior air recirculation mode may result in the formation of con-densation and deterioration of the quality of the interior air.
Do not drive in air recirculation mode for prolonged periods, ex-cept in truly exceptional atmos-pheric conditions.
The message associated with the control is displayed on the multifunction display.
 Press button 6 to return to automatic control of the air intake.
For your comfort, when the ignition is switched off, the settings are stored until it is switched on again.
Rear screen demisting (7)
The heated rear screen operates inde-pendently of the air conditioning sys-tem.
 Press button 7, with the engine running,to demist the rear screen and the mirrors. The indicator light comes on.
Demisting is switched off automatically to prevent an excessive consumption of current and in relation to the exterior temperature.
It may be stopped by pressing button 7 again or when the engine is switched off.
However, demisting resumes if the en-gine is switched on again within one minute.
Switch off the rear screen and exterior mirrors demisting when you consider this necessary as low current con-sumption reduces fuel consumption.

3
43
"AIR CON" menu
Press the "MENU" but-ton to gain access to the general menu, then confirm.
The "General menu" appears on the multifunction display.
Select the Air Conditioning icon using the navigator buttons.
The "Air Conditioning" menu appears on the multifunction display as the main display.
Deactivation of the air conditioning (AC-OFF)
Additional heating*
Vehicles which are fitted with an HDI engine may be equipped with auto-matic additional heating to improve your comfort.
When the engine is idling or when the vehicle is stationary, a high-pitched whistling noise and the emission of a small amount of smoke and odour is normal.
* According to country.
Deactivation may result in discomfort (temperature, humidity, odour, con-densation).
You can cancel the deactivation by pressing the "AUTO" button or the blower 3 on the air conditioning con-trol panel.
The symbol "AC OFF" is displayed on the multifunction display.
There is a risk that the temperature setting value may not be reached and you risk having condensation on the windows.

3
44
AUTOMATIC AIR
CONDITIONING (DUAL ZONE)
Dual zone: this is the differentiated regulation of the temperature and air distribution on the driver’s side and the front passenger side.
The driver and his front passenger can each adjust the temperature and the distribution of the air to suit their re-quirements.
The symbols and messages associat-ed with the automatic air conditioning controls appear on the multifunction display.
Control by the Auto programme
Automatic programme - driver and passenger comfort (1)Press the "AUTO" button. The indicator light comes on. The "AUTO" symbol is displayed on the multifunction display.
Depending on the level of comfort se-lected, the system controls the air dis-tribution, flow, temperature and intake of air in order to guarantee comfort and an adequate circulation of air in the passenger compartment. You do not have to make any adjustments.
Adjustment of the temperature on the driver’s side (2)
Adjustment of the temperature on the passenger side (3)
 Press the up or down arrow to change the temperature on the driver’s side 2 or passenger side 3.
The value indicated on the display cor-responds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit, depending on the choice of configuration validated on the dis-play.
A setting around the value 21 makes it possible to obtain optimum com-fort. However, depending on your re-quirements, a setting between 18 and 24 is usual.
When the engine is cold, to prevent too great a distribution of cold air, the ventilation will only reach its optimum level progressively.

3
45
Blower (4)
Air flow
 Turn dial 4 to the right to increase the air flow or to the left to reduce it.
The air flow symbol (fan) is displayed on the multifunction display and is filled in in relation to the value required.
To prevent condensation and dete-rioration of the quality of the air in the passenger compartment, ensure that an adequate flow of air is maintained.
 Turn the dial 4 to the left until the flow of air stops.
The "OFF" symbol is displayed on the multifunction display.
This action switches off the display and the indicator lights.
It deactivates all of the system’s func-tions, with the exception of the rear screen demisting.
The temperature-related comfort is no longer controlled (temperature, humid-ity, odour, condensation).
Avoid driving for too long with the air conditioning deactivated.
Deactivation of the air conditioning
Adjustment of the driver’s air distribution (5)
Successive or continuous pressure on button 5 or 6 enables you to direct the flow of air on the driver’s side or on the passenger side independently.
The symbol (arrows) corresponding to the chosen direction 5 or 6 is displayed on the multifunction display.
 Windscreen and front side windows.
 Front and rear ventilation.
 Front and rear footwells.
AUTO Automatic distribution.
Adjustment of the passenger air distribution (6)
Control via the manual controls
It is possible to adjust one or more functions manually while leaving the other functions in automatic mode.
The "AUTO" button indicator light is switched off.
Switching to manual mode may result in discomfort (temperature, humidity, odour, condensation) and is not ad-vantageous (comfort).
To return to automatic mode, press the "AUTO" button.
On entering the vehicle, the interior temperature may be much colder (or warmer) than is comfortable. There is no need to change the temperature dis-played in order to obtain rapidly the level of comfort required.
The automatic regulation of the air conditioning will use its maximum per-formance settings to correct the tem-perature difference as quickly as pos-sible.
To reactivate the air conditioning:
 Press button 1, 2 or 3.

3
46
Front visibility control (7)
In certain cases, the comfort pro-gramme may not be sufficient to de-mist or de-ice the windows (humidity, several passengers, ice).
 In this case, select the front visibil-ity programme in order to clear the windows quickly. The indicator light comes on.
It controls the air conditioning, air flow and intake and distributes the ventila-tion to the windscreen and front side windows.
The front visibility control symbol is displayed on the multifunction display.
Once the inconvenience has been eliminated, pressing button 1 returns the system to the comfort setting.
Intake of exterior air/Recirculation of interior air (8)
This function enables you to isolate the passenger compartment from exterior fumes and odours.
 Press button 8 several times to set the air intake mode, the indicator light which corresponds to the mode set comes on at your preference:
- intake of exterior air. Forced ex-terior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator light which corre-sponds to the mode set comes on. Prolonged operation in inte-rior air recirculation mode may result in the formation of con-densation and deterioration of the quality of the interior air.
Do not drive in air recirculation mode for prolonged periods, ex-cept in truly exceptional atmos-pheric conditions.
The message associated with the control is displayed on the multifunction display.
 Press button 8 to return to automat-ic control of the air intake.
For your comfort, when the ignition is switched off, the settings are stored until it is switched on again.
Rear screen demisting (9)
The heated rear screen operates inde-pendently of the air conditioning sys-tem.
 Press button 9, with the engine running,to demist the rear screen and the mirrors. The indicator light comes on.
Demisting is switched off automatical-ly to avoid an excessive consumption of current and in relation to the exterior temperature.
It may be stopped by pressing button 9again or when the engine is switched off.
However, the demisting resumes if the engine is switched on again within one minute.
Switch off the rear screen and exterior mirrors demisting when you consider this necessary as low current con-sumption reduces fuel consumption.

3
47
Deactivation of the air conditioning (AC-OFF)
Deactivation or activation of the simultaneous Left-Right control
Activation of this function permits the transfer of the driver’s configuration to the passenger.
Deactivation of this function permits a return to the independent driver/pas-senger settings.
Any manual action on button 4 or 6 cancels the simultaneous configura-tion setting.
"AIR CON" menu
Press the "MENU" but-ton to gain access to the general menu, then confirm.
The "General menu" appears on the multifunction display.
Select the Air Conditioning icon using the navigator buttons.
The "Air Conditioning" menu ap-pears on the multifunction display as the main display.
Additional heating*
Vehicles which are fitted with an HDI engine may be equipped with auto-matic additional heating to improve your comfort.
When the engine is idling or when the vehicle is stationary, a high-pitched whistling noise and the emission of a small amount of smoke and odour is normal.
* According to country.
Deactivation may result in discomfort (temperature, humidity, odour, con-densation).
You can cancel the deactivation by pressing the "AUTO" button or the blower 4 on the air conditioning con-trol panel.

3
48
EXTERIOR MIRRORSAutomatic tilting of the mirrors in reverse gear*
This function allows you to see the ground (kerb, wall...) when carrying out parking manoeuvres in reverse gear.
Objects observed in the driver and passenger mirrors are, in reality, closer than they ap-pear.
This must be taken into account in or-der to judge the distance of vehicles approaching from behind correctly.
Folding back the mirrors electrically
- from inside:
With the ignition on, move the control A to the central position then pull it rearwards.
- from outside:
Lock the vehicle using the remote control* or the key.This function can be deactivated. Contact your PEUGEOT dealer.
When the vehicle is parked, the exterior mirrors can be folded back manually.
* According to version.
Initial setting of the function
Engage reverse gear then select and adjust the left mirror then the right mir-ror.
These settings will be stored when the vehicle is locked.
Each remote control stores a specific setting.
Tilting the mirror to the parking position
 engage reverse gear,
 move control A to the right or the left to select the corresponding mir-ror.
The exterior mirror corresponding to the side on which you are parking tilts downwards.
Intentional returning of the mirror to the driving position:
 change out of reverse gear or dese-lect the mirror.
The mirror returns to the driving po-sition automatically if the vehicle speed exceeds 10 mph (15 km/h), if the engine is switched off or if re-verse gear is engaged for more than 20 seconds.
Adjustment
 Move control A to the right or to the left to select the corresponding mir-ror.
 Direct control B in all four directions to adjust.

3
49
INTERIOR MIRROROperation
Switch on the ignition and press switch 1:
- Indicator light 2 lit (switch pressed): automatic operation.
- Indicator light 2 off: automatic sys-tem off. The mirror remains at its most clear.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push or pull the lever on the lower edge of the mirror.
Special feature
To ensure maximum visibility during manoeuvres, the mirror clears automatically when reverse gear is engaged.
Automatic day/night interior mirror
This automatically and gradually changes between the day and night positions. To prevent dazzling, the glass of the mirror darkens automati-cally depending on the intensity of the light from behind. It clears as the light (headlamps of following vehicles, sun-light) decreases, ensuring maximum visibility.

3
50
MANUAL STEERING WHEEL
HEIGHT AND DEPTH
ADJUSTMENTELECTRIC ADJUSTMENT OF
THE HEIGHT AND DEPTH OF
THE STEERING WHEELWELCOME FUNCTION
You can activate or deac-tivate this function via the "personalisation-configu-ration" menu on the multi-function display.
When the vehicle is stationary, unlock the steering wheel by pushing the con-trol forwards.
Adjust the height and depth of the steering wheel then lock by pulling the control fully.
When stationary, adjust the height or depth of the steering wheel by moving the control:
 forwards or backwards to adjust the depth.
 up or down to adjust the height.
When the driver’s door is opened with the ignition off, the steering wheel ris-es to make access to or exit from the vehicle easier.
Reinitialisation
Following reconnection of the battery, the welcome function must be reinitial-ised:
- move the control in the direction of the required adjustment,
- release the control,
- move the control again until it reach-es its stop.
This procedure must be carried out for all four directions.

3
51
FRONT SEATS
Manual mode
Longitudinal adjustment
Lift the control bar and slide the seat forwards or backwards.
Driver’s seat cushion height and angle adjustment
Pump up or down to the required posi-tion.
Seat back angle adjustment
Operate the lever for your comfort.