display Peugeot 407 2008 Owner's Manual

Page 14 of 204

FAMILIARISATION
This enables the vehicle to maintain
a constant speed programmed by the
driver.

1. Cruise control mode Selection/Off.

2.
Decrease of the programmed value.

3. Increase of the programmed value.

4. Cruise control On/Off.
In order to be programmed or activated,
the vehicle speed must be above 25 mph
(40 km/h), with at least fourth gear en-
gaged on the manual gearbox. The cruise control or speed limiter mode
appears on the instrument panel when
it is selected.
This prevents the vehicle from exceeding
the speed programmed by the driver
(minimum speed 20 mph (30 km/h)).

1. Speed limiter mode Selection/Off.

2.
Decrease of the programmed value.

3. Increase of the programmed value.

4. Speed limiter On/Off.
The settings must be adjusted with the
engine running.
Speed limiter
Cruise control

 101

 103
Cruise control
Instrument panel display
Speed limiter

Page 19 of 204

1INSTRUMENTS and CONTROLS
22
CHECK (VEHICLE AUTOTEST)
In the presence of a fault
A "minor" fault has been detected:
when the CHECK OK indicator light
has been displayed, the warning
light(s) is(are) displayed.
You can start your vehicle; however,
contact a PEUGEOT dealer as soon
as possible.
A "major" fault has been detected: the
CHECK OK indicator light does not
appear and the warning light(s) is(are)
displayed.
Do not start your vehicle.
Call a PEUGEOT dealer without delay.
Automatic CHECK
With the key in the ignition on position,
all of the warning lights of the func-
tions tested are displayed. They are
switched off after a few seconds.
At the same time, an automatic CHECK
(vehicle autotest) is carried out.
No "major" fault has been de-
tected: the CHECK OK indica-
tor light is displayed after two
seconds.
You can start your vehicle.
Pressing the "CHECK/000" button on
the instrument panel starts the manual
CHECK (vehicle autotest).
This function enables you to fi nd out, at
any time (with the key in the ignition on
position or with the engine running):
- the warnings present,
- the status of the functions activated or deactivated (wipers, automatic
switching on of the lights).
Manual CHECK
The passenger air bag dis-
armed indicator light remains
on while the air bag is dis-
armed.

With the engine running and the ve-
hicle moving, the instrument panel
screen displays the warning lights (in
the event of a fault).

Page 33 of 204

2MULTIFUNCTION DISPLAYS
34
MONOCHROME DISPLAY C
(without RD4 audio equipment) *
Presentation
It displays the following information:
- the time,
- the date,
- the exterior temperature (the value displayed fl ashes if there is a risk
of ice),
- the accesses check,
- the vehicle function status mes- sages, displayed temporarily,
- the warning messages,
- the trip computer displays,
- the vehicle parameters,
- the air conditioning displays,
- the choice of language. Parameter configuration
There are four display control buttons:
-
"MENU" to display the general
menu,
- "MODE" to change the permanent
application,
- "ESC" to abandon the operation in
progress,
- Rotation of the navigator: move-
ment on the display or changing of
a setting,
- Press on the navigator: confi r-
mation of the selection.
General menu "Personalisation-
Configuration" menu
* According to country.
Press the
"MENU" button to access
the general menu:
- trip computer (see corresponding section),
- personalisation-confi guration,
- air conditioning (see correspond- ing section).
Turn the navigator to select the menu
required, then confi rm by pressing the
navigator. Once this menu has been selected,
you can access the following func-
tions:
- defi ne the vehicle parameters,
- display confi guration,
- choice of language.

Page 34 of 204

2MULTIFUNCTION DISPLAYS
35
Defi ne the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the fol-
lowing equipment:
- wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home" lighting and du- ration,
- audible rear parking assistance.

Example: "Duration of "follow-me-
home" lighting" Display confi guration
Once this menu has been selected,
you can access the following settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
Choice of language
Once this menu has been selected,
you can change the language used on
the display (German, Spanish, French,
English, Italian, Dutch, Portuguese,
Brazilian Portuguese).
Once you have selected a setting, turn
the navigator to change its value.
Press the navigator to confi rm and
record the modifi ed data.

Page 35 of 204

2MULTIFUNCTION DISPLAYS
36
MONOCHROME DISPLAY C AND COLOUR DISPLAY C *
This displays the following information:
- the time,
- the date,
- the exterior temperature (the value displayed fl ashes if there is a risk
of ice),
- the accesses check,
- the vehicle function status mes- sages, displayed temporarily,
- the warning displays,
- the RD4 audio equipment dis- plays,
- the trip computer displays,
- the vehicle parameters,
- the air conditioning displays,
- the choice of language. General menu
Defi ne the vehicle parameters
Permits the activation or deactivation
of certain driving and comfort ele-
ments.

Example: Automatic switching on of
the lights.
Press the "MENU" button to gain ac-
cess to the general menu and select
one of the following functions: Audio
Functions, Trip Computer, Person-
alisation/Confi guration and Air Condi-
tioning.

Example: display selected on "Audio
Functions".
The "Personalisation-Confi guration"
menu provides access to successive
confi rmation windows.
Management of the displays
The "AUDIO" , "TRIP" and "CLIM"
buttons on the RD4 audio equipment
keypad permit displaying in the main
window (on the right).

Example: TRIP Choice of language
German, Spanish, French, English,
Italian, Dutch, Portuguese and Brazil-
ian Portuguese.
* During the year.

Page 36 of 204

2MULTIFUNCTION DISPLAYS
37
Display confi guration Changing the date and time Set the parameters one by one, using
the navigator, then confi rm by clicking
on "OK" .
From the list displayed, select "Dis-
play confi guration" , then confi rm.
From the list displayed, select "Setting
the date and time" , then confi rm.
- Brightness, to be adjusted in ac-
cordance with a scale between
Moon (-) and Sun (+).
- Selection of the units of measure- ment.
- Setting the date and time. Your op- erational zone is displayed on the
screen. Use the navigator to move
from one selection to another.
Your new parameters are confi rmed
one by one, by pressing the naviga-
tor button. All of the parameters are
recorded if you click on OK, displayed
on the screen.
The ESCape button on the control pad
enables you to choose not to confi rm
your changes.
- Selection of the colours (on colour display C only). From the menu, displayed on the
screen, select the icon
"Personalisa-
tion-Confi guration" using the navi-
gator, then confi rm.

Page 37 of 204

2MULTIFUNCTION DISPLAYS
38
16/9 COLOUR DISPLAY
This displays the following information:
- the time,
- the date,
- the exterior temperature (the value displayed fl ashes if there is a risk
of ice),
- the accesses check,
- the vehicle function status mes- sages, displayed temporarily,
- the warning displays,
- the RT4 audio equipment displays, the direct entering on the numeric
keypad of the frequency of a trans-
mitter,
- the telematic system displays (tele- phone, services, ...),
- the trip computer displays,
- the air conditioning displays,
- the satellite navigation system dis- plays.
General menu
Display confi guration
Press the "MENU" button to gain access
to the general menu and select one of the
following functions: Navigation-Guidance,
Map, Traffi c Information, Audio Functions,
Telematics, Confi guration, Video, Vehicle
Diagnostics and Air Conditioning.
The "Confi guration" menu provides
access to the following functions:
- Display confi guration,
- Sound,
- Choice of language,
- Defi ne the vehicle parameters.
- Choose colour,
- Adjust brightness,
- Adjust date and time,
- Choose units.
Defi ne the vehicle parameters
Permits the activation or deactivation
of certain driving and comfort ele-
ments:
- permanent locking of the boot on
the 407 Saloon,
- automatic switching on of the lights,
- automatic "follow-me-home" lighting,
- automatic rear wiping on engaging reverse gear on the 407 SW.

Page 38 of 204

2MULTIFUNCTION DISPLAYS
39
You can connect video equipment
(camcorder, digital camera, ...) to the
three video sockets, located in the
glove box.
Video display is only possible when
stationary.
Select the Video menu from the general
menu:
- "Activate video mode" to activate/deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
contrast and the colours.
Press the "ESC" or "DARK" button to
exit from video mode.
Press the "SOURCE" button several
times in succession to select an audio
source other than that of the video.
VIDEO MENU

Page 171 of 204

11
22
33
44
55
66
77
03
153
Press the MENU button.
Press the dial to confi rm the selection.
Turn the dial and select the MAP function.
Turn the dial and select the MAP IN WINDOW or FULL SCREEN MAP tab.
Select OK and press the dial to confi rm.
Press the dial to confi rm the selection.
Turn the dial and select the DISPLAY MAP function.
DISPLAYING THE MAP IN A WINDOW
OR IN FULL SCREEN MODE
GPS
DISPLAY MAP
FULL SCREEN
OK
MAP IN WINDOW

Page 174 of 204

11
22
33
44
66
55
77
04
156
Press the MENU button.
READ MESSAGES
NEW MESSAGE DISPLAY
OK
CONFIGURING THE TMC MESSAGE
ANNOUNCEMENTS We recommend that you do not tick the NEW MESSAGE DISPLAY tab for regions with heavy traffi c.
Turn the dial and select the TRAFFIC INFORMATION function.
Press the dial to confi rm the selection.
Press the dial to confi rm the selection.
Turn the dial and select the CONFIGURE MESSAGE ANNOUNCEMENT function.
Select the READ MESSAGES tab.
The Traffi c Information Messages will be read by the voice synthesiser.
Select the NEW MESSAGE DISPLAY tab.
The traffi c information messages are extended to the fi lters selected (geographic...) and can also be displayed when guidance is not active.
CONFIGURE MESSAGE ANNOUNCEMENT
TRAFFIC INFORMATION
Select OK and press the dial to confi rm.

Page:   1-10 11-20 next >