heating Peugeot 407 2009 Owner's Manual

Page 39 of 250

3COMFORT
39
"AIR CON" menu Press the "MENU" but-
ton to gain access to
the general menu, then
confi rm.
The "General menu" appears on the
multifunction display.
Select the Air Conditioning icon using
the navigator buttons. The
"Air Conditioning" menu ap-
pears on the multifunction display as
the main display.
Deactivation of the air conditioning
(AC-OFF) Additional heating *
Vehicles which are fi tted with an HDI
engine may be equipped with auto-
matic additional heating to improve
your comfort.
When the engine is idling or when the
vehicle is stationary, a high-pitched
whistling noise and the emission of a
small amount of smoke and odour is
normal.
Deactivation may result in discomfort
(temperature, humidity, odour, con-
densation).
The symbol "AC OFF" is displayed on
the multifunction display.
There is a risk that the temperature
setting value may not be reached and
you risk having condensation on the
windows.
You can cancel the deactivation by
pressing the "AUTO" button on the air
conditioning control panel.
* According to country.

Page 43 of 250

3COMFORT
43
Deactivation of the air conditioning
(A/C-OFF)
Deactivation or activation of the
simultaneous Left-Right control
Activation of this function permits the
transfer of the driver's confi guration to
the passenger.
Deactivation of this function permits a
return to the independent driver/pas-
senger settings.
Any manual action on button 4 or 6
cancels the simultaneous confi gura-
tion setting.
"AIR CON" menu
Press the "MENU" but-
ton to gain access to
the general menu, then
confi rm.
The "General menu" appears on the
multifunction display.
Select the Air Conditioning icon using
the navigator buttons.
The "Air Conditioning" menu ap-
pears on the multifunction display as
the main display.
Additional heating *
Vehicles which are fi tted with an HDI
engine may be equipped with auto-
matic additional heating to improve
your comfort.
When the engine is idling or when the
vehicle is stationary, a high-pitched
whistling noise and the emission of a
small amount of smoke and odour is
normal.
* According to country.
Deactivation may result in discomfort
(temperature, humidity, odour, con-
densation).
You can cancel the deactivation by
pressing the
"AUTO" button on the air
conditioning control panel.

Page 44 of 250

3COMFORT
44
PROGRAMMABLE HEATING Programming remote control
The heating system programming re-
mote control consists of the following
buttons and displays:

1. Scrolling functions menu buttons.

2. Function indicator lights: clock,
temperature, operating time, pro-
grammed time, heater operation,
heating management symbols.

3. Digital displays: time, temperature,
duration of operation, programmed
time or level of heating.

4. Off button.

5. On button. Displaying the functions

If a malfunction of the programma-
ble heating system occurs, contact
a PEUGEOT dealer.
The programmable heating operates
independently of the engine.
When the engine is off, it pre-heats
the coolant circuit in order to benefi t
from an optimum engine operating
temperature from the time the engine
is switched on.
The programmable heating system is
switched on using the long range remote
control. Activation can be immediate or
deferred by means of a programming
function.
Displays on the remote control
screen
Press the buttons
1 in succession to
display the functions.
The fi rst press of the left-hand or right-
hand button displays the time.
Next, the left-hand button permits
access to the programming time then
to the level of heating (C1 to C5).
The right-hand button permits access
to the passenger compartment
temperature then to the duration of
operation of the heater if it is to be
switched on immediately.
The passenger compartment
temperature information is
only available when the en-
gine is off.

Page 46 of 250

3COMFORT
46
You must programme your departure
time in order for the system to
calculate the optimum heater start
time automatically.
Programming the heating
Set the time by pressing the buttons
1
and press buttons 4 and 5 simultane-
ously to save it.
Programming the departure time
Press the buttons
1 to display the
programming time.
This symbol is displayed.
Once the programming time has been
displayed, press buttons 4 and 5 si-
multaneously within 10 seconds.
This symbol fl ashes.
This symbol is displayed (fi xed). Once the programming time has been
displayed by means of the buttons
1 ,
press button 5 (ON) until the message

"OK" appears.
Activation - deactivation
When the signal has been received,
the message
"OK" is displayed
along with the symbol "HTM" .
To deactivate the programming, press
button 4 (OFF) until the message

"OK" appears. HTM: Heat Thermo Manage-
ment.
The symbol "HTM" is switched
off.
When carrying out these oper-
ations, if the message "FAIL"
appears, the signal has not
been received. Repeat the
procedure after changing your
location. This symbol is displayed when
the heater starts.
Switching off the heating
Press button
5 (ON).
The symbol "HTM" remains
on.
Changing the level of heating
The system offers 5 levels of heating
(from the lowest level C1 to the high-
est level C5 ).
Once the level of heating has been
displayed by means of the buttons 1 ,
press buttons 4 and 5 simultaneously.
The letter "C" fl ashes.
Set the level of heating by pressing
the buttons 1 .
Press buttons 4 and 5 simultaneously
to save the level selected. The letter

"C" is displayed (fi xed).
The factory pre-sets are re-
placed by the new settings en-
tered. The programmed times
are stored until the next time
they are changed.
When the departure time is acti-
vated, the level of heating cannot be
changed. The departure time must be
deactivated fi rst.

Page 47 of 250

3COMFORT
47
Always switch off the programmable
heating while fi lling with fuel to avoid
any risk of fi re or explosion.
To avoid any risk of poisoning and
asphyxiation, the programmable heat-
ing must not be used, even for short
periods, in an enclosed space such
as a garage or workshop which is not
equipped with an exhaust gas extrac-
tion system.
Do not park the vehicle on an infl am-
mable surface (dry grass, dead leaves,
paper…), there is a risk of fi re.
The programmable heating system
is supplied by the vehicle's fuel tank.
Before use, ensure that the quantity
of fuel remaining is suffi cient. If the
fuel tank is at the reserve, we strongly
advise that you do not programme the
heating.
Changing the battery
The remote control is supplied by a
6V-28L battery, which is supplied.
Information on the display indicates
when it is time to replace this battery.
Unclip the casing then replace the
battery.
The remote control must then be
reinitialised, see below.
As an accessory, your pro-
grammable heating can be
adapted to pre-heat your vehi-
cle's passenger compartment.
Reinitialising the remote control
If the vehicle's battery is disconnect-
ed or the remote control's battery is
replaced, the remote control must be
reinitialised.
After switching on the power, press
button
4 (OFF) for 1 second within the
next 5 seconds. If the operation has
taken place correctly the message

"OK" is displayed on the remote control
screen.
If a problem occurs, the message

"FAIL" appears. Repeat the operation. Do not discard the used
batteries, take them to an
approved collection point.