trip computer Peugeot 407 2009 Owner's Manual

Page 5 of 250

FAMILIARISATION INSTRUMENTS AND CONTROLS
1. Audio equipment steering wheel
stalk.

2. Steering lock and ignition.

3. Steering wheel height and depth
adjustment.

4. Cruise control/speed limiter stalk.

5. Lights/Direction indicator stalk.

6. Air conditioned glove box.
Fuse box.

7. Bonnet release.

8. Passenger-operated electric
window control.

9. Speakers (tweeters).

10. Air diffuser vent grille.

11. Instrument panel.

12. Wiper/Wash-wipe/Trip computer
stalk.

13. Headlamp height adjustment.

14. Storage compartment
(driver's side).

Page 16 of 250

1INSTRUMENTS and CONTROLS
19

1. Coolant temperature indicator dial.

2. Lights on indicators:
dipped headlamps.
main beam headlamps.
front fog lamps.
rear fog lamps.

3. Rev counter dial.

4. Warning lights:
seat belts not fastened
in the front.
fuel level.
left direction indicator.

5. Fuel level indicator dial.
PETROL-DIESEL MANUAL AND AUTOMATIC GEARBOX INSTRUMENT PANELS

10. CHECK and trip recorder zero
reset and service display button.

11. Instrument panel display:
Total distance recorder.
Trip recorder.
Automatic gearbox lever position
indicator.
Cruise control/speed limiter
reference value.
Service indicator.
Direction advice (navigation)
CHECK (vehicle autotest).
Trip computer information
displays.
Warning and status displays.

12. Instrument panel lighting rheostat.

6. Warning lights:
handbrake applied or brake fl uid
level or electronic brake force
distribution fault.
right direction indicator.

7. Speedometer dial.

8. Warning lights:
emission control system.
anti-lock braking system (ABS).
passenger air bag disarmed.
pre-heat (diesel engine starting).

9. Engine oil temperature indicator
dial.

Page 27 of 250

1INSTRUMENTS and CONTROLS
28
TRIP COMPUTER

or
TRIP (Route): access to
the trip computer displays.
Each successive press on the button
located at the end of the wipers stalk
displays different information.
LIGHTING RHEOSTAT
Zero reset
When the required route is displayed,
press the control for more than
two seconds.
With the lights on, press the button
to vary the intensity of the lighting of
the instruments and controls. When
the lighting reaches the minimum
(or maximum) setting, release the
button then press it again to increase
(or reduce) the brightness.
As soon as the lighting is of the required
brightness, release the button.
- the ''vehicle'' tab with:


Page 28 of 250

1INSTRUMENTS and CONTROLS
28
TRIP COMPUTER

or
TRIP (Route): access to
the trip computer displays.
Each successive press on the button
located at the end of the wipers stalk
displays different information.
LIGHTING RHEOSTAT
Zero reset
When the required route is displayed,
press the control for more than
two seconds.
With the lights on, press the button
to vary the intensity of the lighting of
the instruments and controls. When
the lighting reaches the minimum
(or maximum) setting, release the
button then press it again to increase
(or reduce) the brightness.
As soon as the lighting is of the required
brightness, release the button.
- the ''vehicle'' tab with:


Page 29 of 250

1INSTRUMENTS and CONTROLS
29
Range
(km or miles)
Current consumption
(l/100 or km/l or mpg)
This is the average quantity of fuel
consumed during the last few seconds.
This shows the distance that can still
be covered with the fuel remaining
in the tank in accordance with the
average consumption over the last
few miles (kilometres).
Distance remaining to be
travelled (km or miles)
Average speed
(km/h or mph) ''TRIP'' (Route) menu
Press the
''MENU'' button to gain access
to the general menu.
Select the ''Trip computer'' or ''Vehicle
diagnostics'' application using the navi-
gator, then confi rm or press the ''MODE''
button until you gain access to the trip
computer screen, then confi rm ''OK'' .
The ''Trip computer'' or ''Vehicle diagnostics''
menu offers various options:
- Warnings log,
- Status of the functions,
- Inputting of the distance to be
travelled.

Average consumption
(l/100 or km/l or mpg)
Distance travelled
(km or miles) Warnings log
This summarises the active warning
messages, displaying them on the
multifunction display in succession.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Distance remaining
(km or miles)
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled.
This fi gure may increase if
there is a change in the style
of driving or the road surface,
producing a signifi cant drop in
current consumption.
When the range is less than 20 miles
(30 km), four segments are displayed.
After fi lling with fuel, the range is
displayed when it exceeds 62 miles
(100 km). If horizontal segments are dis-
played for long periods instead
of digits, contact a dealer.

This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
This is the distance remaining to
the destination, either calculated at
any time by the navigation system if
guidance is activated or entered by
the user, minus the distance covered
since the distance was entered.
If digits are missing, dashes are dis-
played in their place.
This is the average fuel consumption
since the computer was last set to zero.
This indicates the distance travelled
since the computer was last set to zero. Access via the general menu
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).

Page 30 of 250

2MULTIFUNCTION DISPLAYS
30
MONOCHROME DISPLAY C AND COLOUR DISPLAY C (WITH PC SOUND)
This displays the following information:
- the time,
- the date,
- the exterior temperature (the value displayed fl ashes if there is a risk of
ice),
- the accesses check,
- the vehicle function status messages, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the vehicle parameters,
- the air conditioning parameters,
- the choice of language. General menu
Defi ne the vehicle parameters
Permits the activation or deactivation
of certain driving and comfort ele-
ments.
Example: Automatic switching on of
the lights.
Press the "MENU" button to gain ac-
cess to the general menu and select
one of the following functions: Audio
Functions, Trip Computer, Person-
alisation/Confi guration and Air Condi-
tioning.
Example: display selected on "Audio
Functions".
The "Personalisation-Confi guration"
menu provides access to successive
confi rmation windows.
Management of the displays
The "AUDIO" , "TRIP" and "CLIM"
buttons on the audio equipment key-
pad permit displaying in the main win-
dow (on the right).
Example: TRIP Choice of language
German, Spanish, French, English,
Italian, Dutch, Turkish, Portuguese
and Brazilian Portuguese.

Page 32 of 250

2MULTIFUNCTION DISPLAYS
32
Display
This menu allows you to set the bright-
ness of the display, the display colour
scheme and the colour of the map
(day/night and auto mode).
Vehicle
This menu permits the activation or
deactivation of certain driving and
comfort systems:
- air conditioning (A/C),
- vehicle information,
- access to the vehicle,
- driving assistance,
- lighting confi guration,
- comfort lighting.
Units
This menu permits selection of the
units: temperature (°C or °F) and
consumption (km/l, l/100, miles and
mpg).
System
This menu permits restoring of the
factory confi guration, displaying of the
software version and activation of the
scrolling text. For safety reasons, confi gura-
tion of the multifunction dis-
plays by the driver must be
carried out when stationary. COLOUR DISPLAY(WITH PC NAV) "SETUP" menu
Press the SETUP button to gain access
to the "SETUP" menu. This provides
access to the following functions:
- System language,
- Date & Time,
- Display,
- Vehicle,
- Units,
- System.
System language
This menu allows you to select
the language used by the display:
German, English, Spanish, French,
Italian, Dutch, Polish, Portuguese.
Date & Time
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the "Au-
dio and Telematics" section).
This displays the following informa-
tion:
- the time,
- the date,
- the exterior temperature (the value
displayed fl ashes if there is a risk of
ice),
- the accesses check,
- the vehicle function status messag- es, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the air conditioning parameters,
- the satellite navigation system infor- mation.

Page 33 of 250

2MULTIFUNCTION DISPLAYS
33
HIGH DEFINITION COLOUR DISPLAY (WITH PC COM)
This displays the following information:
- the time,
- the date,
- the exterior temperature (the value displayed fl ashes if there is a risk of
ice),
- the accesses check,
- the vehicle function status messages, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the air conditioning parameters,
- the satellite navigation system infor- mation.
General menu Display confi guration
Press the "MENU" button to gain ac-
cess to the general menu and select
one of the following functions: Naviga-
tion-Guidance, Map, Traffi c Information,
Audio Functions, Telematics, Confi gura-
tion, Video, Vehicle Diagnostics and Air
Conditioning. - Choose colour,
- Adjust brightness,
- Adjust date and time,
- Choose units.
Defi ne the vehicle parameters
Permits the activation or deactivation of
certain driving and comfort elements:
- permanent locking of the boot on
the 407 Saloon,
- automatic switching on of the lights,
- automatic "follow-me-home" lighting,
- automatic rear wiping on engaging reverse gear on the 407 SW.
The "Confi guration" menu provides
access to the following functions:
- Display confi guration,
- Sound,
- Choice of language,
- Defi ne the vehicle parameters.
You can connect video equipment
(camcorder, digital camera, ...) to the
three video sockets, located in the
glove box.
Video display is only possible when
stationary.
Select the Video menu from the general
menu:
- "Activate video mode" to activate/deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the con-
trast and the colours.
Press the "ESC" or "DARK" button to
exit from video mode.
Press the "SOURCE" button several
times in succession to select an audio
source other than that of the video. VIDEO MENU (WITH PC COM)

Page 165 of 250

143
02
°
> COLOUR SCREEN
This displays the following information, via the audio control panel: - time, - date, - ambient temperature (if there is a risk of ice, you are warned by a message), - audio source displays (radio, CD, jukebox, ... ), - telematic system displays (telephone, services , ...), - check of openings (doors, boot, ...), - warning messages (e.g.: "Fuel level low") and vehicle function status messages (e.g.: "Auto lighting activated") displaye d temporarily, - trip computer information, - GPS (Europe) satellite navigation system information.
New The system uses the complete and detailed NAVTEQ m aps installed directly on the equipment's hard disk. There is no need to keep a mapping CD in the CD player. Updates of the maps of France and of the other European countries, offered by our partner NAVTEQ, will be available from the PEUGEOT network.
Screen confi guration: refer to the section - Screen menu map.
Telephone
Orange Time:
Date:

Page 167 of 250

145
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
02 SCREEN AND GENERAL MENU
Press the OK dial to access short-cut menus according to the display on the screen.
INTERNAL TELEPHONE:
call list
dial
phone book
voice mail NAVIGATION (IF NAVIGATION IS IN PROGRESS):
resume/stop guidance
divert route
route type
consult traffi c info
zoom/scroll map
TRIP COMPUTER:
alert log
status of functions
BLUETOOTH TELEPHONE:
call list
call
phone book
private mode/hands-free mode
place call on hold/resume call
CD (MP3 OR AUDIO):
copy CD to JBX/stop copy
activate/deactivate Introscan
activate/deactivate random play
activate/deactivate repeat
RADIO:
enter a frequency
activate/deactivate RDS
activate/deactivate REG mode
mask/display "Radio Text"
JUKEBOX:
select playlist
activate/deactivate Introscan
activate/deactivate random play
activate/deactivate repeat
USB:
copy USB to JBX/stop copy
eject USB
activate/deactivate Introscan
activate/deactivate random play
activate/deactivate repeat
DISPLAY ACCORDING TO THE CONTEXT
IN "ZOOM/SCROLL" MODE:
position info
select as destination
select as stage
store this position
exit map mode
guidance option

Page:   1-10 11-20 next >