warning Peugeot 407 2010 User Guide

1
24
Particle emission fi lter
saturation warning lamp
(Diesel engine)
With the engine running, this indicates
that the particle emission fi lter is star-
ting to become saturated (exceptionally
prolonged urban driving type conditions:
low speed, long traffi c jams...) or a low
diesel additive reservoir level.
In order to regenerate the fi lter, you are
advised to drive, as soon as possible
when the traffi c conditions permit, at a
speed of 40 mph (60 km/h) or above
for at least fi ve minutes (until the war-
ning lamp is switched off).
If the warning lamp remains on, con-
tact a PEUGEOT dealer.
Following prolonged use of the vehi-
cle at very low speeds or at idle, you
may, exceptionally, notice an emission
of water vapour at the exhaust during
acceleration. This does not affect the
performance of the vehicle or the en-
vironment.
Service warning lamp
This is displayed to indicate an engine
management system fault.
Contact a PEUGEOT dealer as soon
as possible. Automatic gearbox fault
warning lamp
This indicates an automatic gearbox
fault.
The gearbox will operate in down-
graded mode, locked in 3rd gear.
Never force the selector lever.
Consult a PEUGEOT dealer.
Electronically controlled
suspension fault warning
lamp
This indicates an electronically con-
trolled suspension malfunction.
Select automatic operation and con-
tact a PEUGEOT dealer as soon as
possible. Parking sensor system
warning lamp
In reverse gear, this indicates a park-
ing sensor system fault.
Consult a PEUGEOT dealer. Electronically controlled
suspension indicator lamps
This comes on when the SPORT func-
tion is activated. This comes on when the SPORT
function is deactivated.
Automatic illumination of
headlamps indicator lamp
Automatic illumination of
headlamps deactivation
indicator lamp
Automatic rain sensitive
wipers indicator lamp
Automatic rain sensitive
wipers deactivation
indicator lamp
This comes on when the AUTO func-
tion is activated.
This comes on when the AUTO func-
tion is deactivated.
This comes on when the AUTO func-
tion is activated.
This comes on when the AUTO func-
tion is deactivated.

1
29
Range (miles or km)
Current fuel consumption(l/100 or km/l or mpg)
This is the average quantity of fuel con-
sumed during the last few seconds.
This shows the distance that can still
be covered with the fuel remaining in
the tank in accordance with the ave-
rage consumption over the last few
miles (kilometres).
Distance remaining to be travelled (miles or km)
Average speed (mph or km/h)
TRIP menu
Press the
"MENU" button for access
to the main menu.
Select the "Trip computer" or "Ve-
hicle diagnostics" application using
the navigator, then confi rm or press
the "MODE" button until you gain ac-
cess to the trip computer screen, then
confi rm "OK" .
The "Trip computer" or "Vehicle diag-
nostics" menu offers various options:
- Alerts log,
- Status of the functions,
- Inputting the distance to be tra- velled.
Average fuel consumption(l/100 or km/l or mpg)
Distance travelled (miles or km)
Alerts log
This summarises the active warning
messages, displaying them on the
multifunction screen in succession.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Distance remaining (miles or km)
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled.
This fi gure may increase if
there is a change in the style
of driving or the road surface,
producing a signifi cant drop in
current fuel consumption.
When the range is less than 20 miles
(30 km), four bars are displayed. After
fi lling with fuel, the range is displayed
when it exceeds 62 miles (100 km).
If horizontal bars are displayed
for long periods instead of di-
gits, contact a dealer.
This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
This is the distance remaining to the
destination, either calculated at any
time by the navigation system if gui-
dance is activated or entered by the
user, minus the distance covered since
the distance was entered.
If digits are missing, dashes are dis-
played in their place.
This is the average fuel consumption
since the computer was last set to
zero.
This indicates the distance travelled
since the computer was last set to
zero.
Access via the main menu
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).

2MULTIFUNCTION SCREENS
30
MONOCHROME SCREEN C/COLOUR SCREEN C (WITH PEUGEOT CONNECT SOUND)
This displays the following information:
- time,
- date,
- ambient temperature (the value dis-played fl ashes if there is a risk of
ice),
- check of openings,
- vehicle function status messages, displayed temporarily,
- warning messages,
- audio functions,
- trip computer information,
- vehicle parameters,
- air conditioning settings,
- choice of language. Main menu
Defi ne the vehicle parameters
Permits the activation or deactivation
of certain driving and comfort elements.
Example: Automatic illumination of
headlamps.
Press the "MENU" button for access
to the main menu and select one of
the following functions: Audio Func-
tions, Trip Computer, Personalisation/
Confi guration and Air Conditioning.
Example: display selected on "Audio
Functions".
The "Personalisation-Confi guration"
menu provides access to successive
confi rmation windows.
Management of the displays
The "AUDIO" , "TRIP" and "CLIM"
buttons on the audio equipment key-
pad permit displaying in the main win-
dow (on the right).
Example: TRIP Choice of language
German, Spanish, French, English,
Italian, Dutch, Turkish, Portuguese
and Brazilian Portuguese.

2MULTIFUNCTION SCREENS
32
Display
This menu allows you to set the bright-
ness of the display, the display colour
scheme and the colour of the map
(day/night and auto mode).
Vehicle
This menu permits the activation or
deactivation of certain driving and
comfort systems:
- air conditioning (A/C),
- vehicle information,
- access to the vehicle,
- driving assistance,
- lighting confi guration,
- comfort lighting.
Units
This menu permits selection of the
units: temperature (°C or °F) and fuel
consumption (km/l, l/100, miles and
mpg).
System
This menu permits restoring of the factory
confi guration, display of the software ver-
sion and activation of scrolling text. For safety reasons, confi gu-
ration of the multifunction
screen by the driver must only
be done when stationary. COLOUR SCREEN (WITH PEUGEOT CONNECT NAVIGATION) "SETUP" menu
Press the SETUP button to gain access
to the "SETUP" menu. This provides
access to the following functions:
- System language,
- Date & Time,
- Display,
- Vehicle,
- Units,
- System.
System language
This menu allows you to select
the language used by the display:
German, English, Spanish, French,
Italian, Dutch, Polish, Portuguese.
Date & Time
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the
"Audio and Telematics" section).
This displays the following information:
- time,
- date,
- ambient temperature (the value dis-
played fl ashes if there is a risk of ice),
- check of openings,
- vehicle function status messages, displayed temporarily,
- warning messages,
- audio functions,
- trip computer information,
- air conditioning settings,
- satellite navigation system information.

2MULTIFUNCTION SCREENS
33
HIGH DEFINITION COLOUR SCREEN (WITH PEUGEOT CONNECT MEDIA)
This displays the following information:
- time,
- date,
- ambient temperature (the value dis-played fl ashes if there is a risk of
ice),
- check of openings,
- vehicle function status messages, displayed temporarily,
- warning messages,
- audio functions,
- trip computer information,
- air conditioning settings,
- satellite navigation system information.
Main menu Display confi guration
Press the "MENU" button to gain ac-
cess to the main menu and select one
of the following functions: Navigation-
Guidance, Map, Traffi c Information,
Audio Functions, Telematics, Confi gu-
ration, Video, Vehicle Diagnostics and
Air Conditioning. - Choose colour,
- Adjust brightness,
- Adjust date and time,
- Choose units.
Defi ne the vehicle parameters
Permits the activation or deactivation
of certain driving and comfort ele-
ments:
- permanent locking of the boot on
the 407 Saloon,
- automatic illumination of headlamps,
- automatic "guide-me-home" lighting,
- automatic rear wiping on engaging reverse gear on the 407SW.
The "Confi guration" menu provides
access to the following functions:
- Display confi guration,
- Sound,
- Choice of language,
- Defi ne the vehicle parameters.
You can connect video equipment
(camcorder, digital camera, ...) to the
three video sockets, located in the
glove box.
Video display is only possible when
stationary.
Select the Video menu from the general
menu:
- "Activate video mode" to activate/deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the con-
trast and the colours.
Press the "ESC" or "DARK" button to
exit from video mode.
Press the "SOURCE" button several
times in succession to select an audio
source other than that of the video. VIDEO MENU (WITH PEUGEOT CONNECT MEDIA)

4ACCESS
69
"Rear screen open" warning

When the engine is running , if the
rear screen is not fully closed, you are
warned by a message on the multi-
function screen.

When the vehicle is moving (speed
greater than 6 mph (10 km/h)), if the
rear screen is not fully closed, you are
warned by an audible signal, a mes-
sage on the multifunction screen and
lighting of the service warning lamp. Tailgate release
This enables the tailgate to be un-
locked in the event of a central locking
fault.
- Fold back the rear seats to gain
access to the lock from inside the
boot.
- Insert a small screwdriver into hole A
of the lock to unlock the tailgate.

4ACCESS
72
FUEL TANK
The capacity of the tank is approxi-
mately 67 litres. When the low fuel level is
reached, this warning lamp
comes on in the instrument
panel, accompanied by an au-
dible signal and a message on the mul-
tifunction screen. When it fi rst comes
on, about 6 litres of fuel remains in
the tank.
If you run completely out of fuel
(Diesel), refer also to the "Checks"
section.
A label fi tted to the inside of the fuel
fi ller fl ap indicates which type of fuel
to use.
Additions of fuel must be of at least
5 litres to be taken into account by the
fuel gauge.
Opening the fuel fi ller may produce the
noise of an inrush of air. This vacuum
is entirely normal and results from the
sealing of the fuel system.
Low fuel warning
To refuel in complete safety:

 you must switch off the engine,

 open the fuel fi ller fl ap.

 turn the cap to the left.

 remove the cap and hang the end
on the hook located on the inside
of the fl ap.

 fi ll the tank, but do not continue
after the third cut-off of the noz-
zle ; this may cause malfunctions.
After fi lling the tank:

 refi t the cap,

 close the fl ap.
Operating fault
A fuel gauge fault is indicated by the
fuel guage needle returning to zero.
Have it checked by a PEUGEOT dealer.
Refuelling

5
75
Automatic illumination of
headlamps
The dipped beam headlamps switch
on automatically if the light is poor and
when the windscreen wipers operate
continuously. They switch off when
the light is bright enough or the wind-
screen wipers stop.
Warning: in foggy weather or in snow,
the sunshine sensor can detect suffi -
cient light. The lighting will not come
on automatically. If necessary, you
must switch the dipped beam head-
lamps on manually. Activation Manual "Guide-me-home" lighting
When you leave your vehicle, the side-
lamps and dipped beam headlamps
can be left on for a few seconds.
When the function is activated, the
indicator lamp comes on on the
5-dial instrument panel screen.
To deactivate or activate the
function, use the "Persona-
lisation - confi guration"
menu on your multifunction
screen.
For safety reasons, activation/
deactivation of the "Automatic
illumination of headlampss"
function via the menu must be
carried out when stationary. To deactivate or activate the
"Automatic guide-me-home
lighting" function, use the

"Personalisation - confi-
guration" menu on your
multifunction screen.
The duration of the lighting
can be set via the "Person-
alisation - confi guration"
menu of your multifunction
screen.
Automatic "Guide-me-home"
lighting
When you leave your vehicle
with
the automatic illumination of head-
lamps activated, the sidelamps and
dipped beam headlamps remain on
for the duration selected after the igni-
tion is switched off.
Deactivation
When the function is deactivated,
the indicator lamp comes on on the
5-dial instrument panel screen.
Do not cover the sunshine/
brightness sensor, located in
the centre of the windscreen.
It is used to regulate the air
conditioning and for the automatic il-
lumination of headlamps.

If the sunshine/brightness sensor
does not function correctly, the
sidelamps and dipped beam headlam-
ps come on.
Consult a PEUGEOT dealer.
Activation:

 switch off the engine,

 "fl ash" the headlamps,

 get out of the vehicle and lock it.

5
75
Automatic illumination of
headlamps
The dipped beam headlamps switch
on automatically if the light is poor and
when the windscreen wipers operate
continuously. They switch off when
the light is bright enough or the wind-
screen wipers stop.
Warning: in foggy weather or in snow,
the sunshine sensor can detect suffi -
cient light. The lighting will not come
on automatically. If necessary, you
must switch the dipped beam head-
lamps on manually. Activation Manual "Guide-me-home" lighting
When you leave your vehicle, the side-
lamps and dipped beam headlamps
can be left on for a few seconds.
When the function is activated, the
indicator lamp comes on on the
5-dial instrument panel screen.
To deactivate or activate the
function, use the "Persona-
lisation - confi guration"
menu on your multifunction
screen.
For safety reasons, activation/
deactivation of the "Automatic
illumination of headlampss"
function via the menu must be
carried out when stationary. To deactivate or activate the
"Automatic guide-me-home
lighting" function, use the

"Personalisation - confi-
guration" menu on your
multifunction screen.
The duration of the lighting
can be set via the "Person-
alisation - confi guration"
menu of your multifunction
screen.
Automatic "Guide-me-home"
lighting
When you leave your vehicle
with
the automatic illumination of head-
lamps activated, the sidelamps and
dipped beam headlamps remain on
for the duration selected after the igni-
tion is switched off.
Deactivation
When the function is deactivated,
the indicator lamp comes on on the
5-dial instrument panel screen.
Do not cover the sunshine/
brightness sensor, located in
the centre of the windscreen.
It is used to regulate the air
conditioning and for the automatic il-
lumination of headlamps.

If the sunshine/brightness sensor
does not function correctly, the
sidelamps and dipped beam headlam-
ps come on.
Consult a PEUGEOT dealer.
Activation:

 switch off the engine,

 "fl ash" the headlamps,

 get out of the vehicle and lock it.

7SAFETY
86
HORN
Press one of the spokes of the steering
wheel.
HAZARD WARNING LAMPS
Automatic operation of hazard
warning lamps
When braking in an emergency, de-
pending on the deceleration, the hazard
warning lamps come on automatically.
They switch off automatically the fi rst
time you accelerate.
It is also possible to switch them off by
pressing the button.
ELECTRONIC STABILITY PROGRAMME (ESP)
This system is linked and complemen-
tary to the ABS system.
In the event of a signifi cant variation
between the trajectory of the vehicle
and the path required by the driver,
the ESP monitors wheel by wheel and
acts automatically on the engine and
on the brake of one or more wheels, to
put the vehicle back on course, within
the limit of the laws of physics.
ESP operation The indicator lamp comes on. Disarming the ESP
In exceptional conditions (starting the
vehicle when it is stuck in the mud,
immobilised in snow, on unstable
ground...), it may be advisable to dis-
arm the ESP.

 Press the "ESP OFF" switch, lo-
cated on the centre console.
The switch lights up and the warning
light comes on: the ESP no longer acts
on the operation of the engine.
Instrument panel indicator light.

The system is triggered again:

 automatically if the ignition is
switched off,


automatically above 30 mph (50 km/h),

 manually by pressing the switch
again.
Press the button, the direction indica-
tors fl ash.
They can operate with the ignition off.