buttons Peugeot 407 2010 Owner's Manual
Page 44 of 249
3COMFORT
44
PROGRAMMABLE HEATING Programming remote control
T h e h e a t i n g s y s t e m p r o g r a m m i n g r e -
mote control consists of the following
b u t t o n s a n d d i s p l a y s :
1. S c r o l l i n g f u n c t i o n s m e n u b u t t o n s .
2. Function indicator lights: clock,
t e m p e r a t u r e , o p e r a t i n g t i m e , p r o -
g r a m m e d t i m e , h e a t e r o p e r a t i o n ,
h e a t i n g m a n a g e m e n t s y m b o l s .
3. D i g i t a l d i s p l a y s : t i m e , t e m p e r a t u r e ,
d u r a t i o n o f o p e r a t i o n , p r o g r a m m e d
t i m e o r l e v e l o f h e a t i n g .
4. O f f b u t t o n .
5. O n b u t t o n . Displaying the functions
If a malfunction of the programma-
ble heating system occurs, contact
a PEUGEOT dealer.
T h e p r o g r a m m a b l e h e a t i n g o p e r a t e s
i n d e p e n d e n t l y o f t h e e n g i n e .
W h e n t h e e n g i n e i s o f f , i t p r e - h e a t s
t h e c o o l a n t c i r c u i t i n o r d e r t o b e n e fi t
f r o m a n o p t i m u m e n g i n e o p e r a t i n g
t e m p e r a t u r e f r o m t h e t i m e t h e e n g i n e
i s s w i t c h e d o n .
T h e p r o g r a m m a b l e h e a t i n g s y s t e m i s
switched on using the long range remote
c o n t r o l . A c t i v a t i o n c a n b e i m m e d i a t e o r
d e f e r r e d b y m e a n s o f a p r o g r a m m i n g
f u n c t i o n .
Displays on the remote control
screen
Press the buttons
1 in succession to
d i s p l a y t h e f u n c t i o n s .
T h e fi r s t p r e s s o f t h e l e f t - h a n d o r r i g h t -
h a n d b u t t o n d i s p l a y s t h e t i m e .
N e x t , t h e l e f t - h a n d b u t t o n p e r m i t s a c -
c e s s t o t h e p r o g r a m m i n g t i m e t h e n t o
t h e l e v e l o f h e a t i n g ( C 1 t o C 5 ) .
T h e r i g h t - h a n d b u t t o n p e r m i t s a c c e s s
t o t h e p a s s e n g e r c o m p a r t m e n t t e m p e r -
a t u r e t h e n t o t h e d u r a t i o n o f o p e r a t i o n
of the heater if it is to be switched on
i m m e d i a t e l y .
T h e p a s s e n g e r c o m p a r t m e n t
t e m p e r a t u r e i n f o r m a t i o n i s
o n l y a v a i l a b l e w h e n t h e e n -
g i n e i s o f f .
Page 45 of 249
3COMFORT
45
O n c e t h e t i m e h a s b e e n d i s p l a y e d , b y
means of the buttons 1 , p r e s s b u t t o n s 4
and 5 s i m u l t a n e o u s l y w i t h i n 1 0 s e c o n d s .
T h i s s y m b o l fl a s h e s .
Setting the time
Set the time using the buttons
1 .
Press buttons 4 and 5 s i m u l t a n e o u s l y
t o s a v e i t .
T h i s s y m b o l i s d i s p l a y e d ( fi x e d ) . Press button
5 ( O N ) u n t i l t h e m e s s a g e
"OK" a p p e a r s .
When the signal has been received,
the message "OK" i s d i s p l a y e d a l o n g
w i t h t h e d u r a t i o n o f o p e r a t i o n .
T h e h e a t e r s t a r t s a n d t h i s s y m -
b o l i s d i s p l a y e d .
Immediate activation
T o d e a c t i v a t e t h e f u n c t i o n , p r e s s b u t -
ton
4 ( O F F ) u n t i l t h e m e s s a g e "OK"
a p p e a r s .
W h e n c a r r y i n g o u t t h e s e o p e r -
ations, if the message "FAIL"
a p p e a r s , t h e s i g n a l h a s n o t
b e e n r e c e i v e d . R e p e a t t h e
p r o c e d u r e a f t e r c h a n g i n g y o u r
l o c a t i o n .
T h i s s y m b o l i s s w i t c h e d o f f . Setting the duration of
operation
Press the buttons
1 t o d i s p l a y t h e d u -
r a t i o n o f o p e r a t i o n .
T h i s s y m b o l i s d i s p l a y e d .
O n c e t h e d u r a t i o n o f o p e r a t i o n h a s
b e e n d i s p l a y e d , p r e s s b u t t o n s 4 and 5
s i m u l t a n e o u s l y w i t h i n 1 0 s e c o n d s .
T h i s s y m b o l fl a s h e s .
S e t t h e d u r a t i o n b y p r e s s i n g t h e b u t -
tons 1 ( a d j u s t m e n t i n s t e p s o f 1 0 m i n s
a n d m a x v a l u e 3 0 m i n s ) .
Press buttons 4 and 5 s i m u l t a n e o u s l y
t o s a v e t h e d u r a t i o n o f o p e r a t i o n .
T h i s s y m b o l i s d i s p l a y e d ( fi x e d ) . T h e f a c t o r y s e t t i n g v a l u e i s
3 0 m i n u t e s .
Page 46 of 249
3COMFORT
46
Y o u m u s t p r o g r a m m e y o u r d e p a r t u r e t i m e
i n o r d e r f o r t h e s y s t e m t o c a l c u l a t e t h e o p -
t i m u m h e a t e r s t a r t t i m e a u t o m a t i c a l l y .
Programming the heating
S e t t h e t i m e b y p r e s s i n g t h e b u t t o n s
1
a n d p r e s s b u t t o n s 4 and 5 simultane-
o u s l y t o s a v e i t .
Programming the departure time
Press the buttons
1 t o d i s p l a y t h e p r o -
g r a m m i n g t i m e .
T h i s s y m b o l i s d i s p l a y e d .
O n c e t h e p r o g r a m m i n g t i m e h a s b e e n
d i s p l a y e d , p r e s s b u t t o n s 4 and 5 si-
m u l t a n e o u s l y w i t h i n 1 0 s e c o n d s .
T h i s s y m b o l fl a s h e s .
T h i s s y m b o l i s d i s p l a y e d ( fi x e d ) . O n c e t h e p r o g r a m m i n g t i m e h a s b e e n
d i s p l a y e d b y m e a n s o f t h e b u t t o n s
1 ,
p r e s s b u t t o n 5 ( O N ) u n t i l t h e m e s s a g e
"OK" a p p e a r s .
Activation - deactivation
When the signal has been received,
the message
"OK" i s d i s p l a y e d
a l o n g w i t h t h e s y m b o l "HTM" .
T o d e a c t i v a t e t h e p r o g r a m m i n g , p r e s s
button 4 ( O F F ) u n t i l t h e m e s s a g e
"OK" a p p e a r s .
H T M : H e a t T h e r m o M a n a g e m e n t .
T h e s y m b o l "HTM" is switched
o f f .
W h e n c a r r y i n g o u t t h e s e o p -
erations, if the message "FAIL"
a p p e a r s , t h e s i g n a l h a s n o t b e e n
r e c e i v e d . R e p e a t t h e p r o c e d u r e
a f t e r c h a n g i n g y o u r l o c a t i o n . T h i s s y m b o l i s d i s p l a y e d w h e n
t h e h e a t e r s t a r t s .
Switching off the heating
Press button
5 ( O N ) .
T h e s y m b o l "HTM" r e m a i n s o n .
Changing the level of heating
T h e s y s t e m o f f e r s 5 levels of heating
(from the lowest level C1 to the high-
est level C5 ) .
Once the level of heating has been
d i s p l a y e d b y m e a n s o f t h e b u t t o n s 1 ,
p r e s s b u t t o n s 4 and 5 s i m u l t a n e o u s l y .
The letter "C" fl a s h e s .
S e t t h e l e v e l o f h e a t i n g b y p r e s s i n g
the buttons 1 .
Press buttons 4 and 5 s i m u l t a n e o u s l y
t o s a v e t h e l e v e l s e l e c t e d . T h e l e t t e r
"C" i s d i s p l a y e d ( fi x e d ) .
T h e f a c t o r y p r e - s e t s a r e r e -
p l a c e d b y t h e n e w s e t t i n g s
e n t e r e d . T h e p r o g r a m m e d
times are stored until the next
t i m e t h e y a r e c h a n g e d .
W h e n t h e d e p a r t u r e t i m e i s a c t i -
vated, the level of heating cannot be
c h a n g e d . T h e d e p a r t u r e t i m e m u s t b e
d e a c t i v a t e d fi r s t .
Page 65 of 249
4ACCESS
CHANGING THE REMOTE CONTROL BATTERY
Battery ref.: CR1620/3 volts.
To change the battery, unclip the casing
using a coin at the notch.
REINITIALISATION
Switch off the ignition.
Switch the ignition on again.
Press the remote control locking but-
ton immediately for a few seconds.
Switch off the ignition and remove
the remote control key from the ig-
nition lock. The remote control is
now working again.
If the remote control does not work
after the battery has been changed,
reinitialise the remote control.
ELECTRONIC ENGINE IMMOBILISER
Electronic engine immobiliser
indicator lamp
It is accompanied by a message on
the multi-function screen.
Your vehicle will not start.
Consult a PEUGEOT dealer.
This locks the engine control sys-
tem as soon as the ignition has been
switched off and therefore prevents
starting of the vehicle by anyone who
does not have the key.
The ignition key has an electronic chip
which has a special code. When the ig-
nition is switched on, the code must be
recognised for starting to be possible.
If the system does not function correct-
ly, the following indicator lamp comes on:
Remote control
The high frequency remote control is
a sensitive system; do not operate it
while it is in your pocket as there is a
possibility that it may unlock the vehi-
cle, without you being aware of it.
Do not repeatedly press the buttons of
your remote control out of range and
out of sight of your vehicle. You run the
risk of stopping it from working and the
remote control would have to be reini-
tialised.
The remote control does not operate
when the key is in the ignition, even
when the ignition is switched off, ex-
cept for reinitialisation.
Locking the vehicle
Driving with the doors locked may
make access to the passenger com-
partment by the emergency services
m o r e d i f fi c u l t i n a n e m e r g e n c y .
As a safety precaution (with children
on board), remove the key from the
ignition when you leave the vehicle,
even for a short time. Lost keys
Visit a PEUGEOT dealer with
the vehicle's V5 registration
d o c u m e n t a n d y o u r p e r s o n a l i d e n t i fi -
cation documents.
The PEUGEOT dealer will be able to re-
trieve the key code and the transponder
code required to order a replacement key.
Page 68 of 249
4ACCESS
CHANGING THE REMOTE CONTROL BATTERY
Battery ref.: CR1620/3 volts.
To change the battery, unclip the casing
using a coin at the notch.
REINITIALISATION
Switch off the ignition.
Switch the ignition on again.
Press the remote control locking but-
ton immediately for a few seconds.
Switch off the ignition and remove
the remote control key from the ig-
nition lock. The remote control is
now working again.
If the remote control does not work
after the battery has been changed,
reinitialise the remote control.
ELECTRONIC ENGINE IMMOBILISER
Electronic engine immobiliser
indicator lamp
It is accompanied by a message on
the multi-function screen.
Your vehicle will not start.
Consult a PEUGEOT dealer.
This locks the engine control sys-
tem as soon as the ignition has been
switched off and therefore prevents
starting of the vehicle by anyone who
does not have the key.
The ignition key has an electronic chip
which has a special code. When the ig-
nition is switched on, the code must be
recognised for starting to be possible.
If the system does not function correct-
ly, the following indicator lamp comes on:
Remote control
The high frequency remote control is
a sensitive system; do not operate it
while it is in your pocket as there is a
possibility that it may unlock the vehi-
cle, without you being aware of it.
Do not repeatedly press the buttons of
your remote control out of range and
out of sight of your vehicle. You run the
risk of stopping it from working and the
remote control would have to be reini-
tialised.
The remote control does not operate
when the key is in the ignition, even
when the ignition is switched off, ex-
cept for reinitialisation.
Locking the vehicle
Driving with the doors locked may
make access to the passenger com-
partment by the emergency services
m o r e d i f fi c u l t i n a n e m e r g e n c y .
As a safety precaution (with children
on board), remove the key from the
ignition when you leave the vehicle,
even for a short time. Lost keys
Visit a PEUGEOT dealer with
the vehicle's V5 registration
d o c u m e n t a n d y o u r p e r s o n a l i d e n t i fi -
cation documents.
The PEUGEOT dealer will be able to re-
trieve the key code and the transponder
code required to order a replacement key.
Page 69 of 249
4ACCESS
CHANGING THE REMOTE CONTROL BATTERY
Battery ref.: CR1620/3 volts.
To change the battery, unclip the casing
using a coin at the notch.
REINITIALISATION
Switch off the ignition.
Switch the ignition on again.
Press the remote control locking but-
ton immediately for a few seconds.
Switch off the ignition and remove
the remote control key from the ig-
nition lock. The remote control is
now working again.
If the remote control does not work
after the battery has been changed,
reinitialise the remote control.
ELECTRONIC ENGINE IMMOBILISER
Electronic engine immobiliser
indicator lamp
It is accompanied by a message on
the multi-function screen.
Your vehicle will not start.
Consult a PEUGEOT dealer.
This locks the engine control sys-
tem as soon as the ignition has been
switched off and therefore prevents
starting of the vehicle by anyone who
does not have the key.
The ignition key has an electronic chip
which has a special code. When the ig-
nition is switched on, the code must be
recognised for starting to be possible.
If the system does not function correct-
ly, the following indicator lamp comes on:
Remote control
The high frequency remote control is
a sensitive system; do not operate it
while it is in your pocket as there is a
possibility that it may unlock the vehi-
cle, without you being aware of it.
Do not repeatedly press the buttons of
your remote control out of range and
out of sight of your vehicle. You run the
risk of stopping it from working and the
remote control would have to be reini-
tialised.
The remote control does not operate
when the key is in the ignition, even
when the ignition is switched off, ex-
cept for reinitialisation.
Locking the vehicle
Driving with the doors locked may
make access to the passenger com-
partment by the emergency services
m o r e d i f fi c u l t i n a n e m e r g e n c y .
As a safety precaution (with children
on board), remove the key from the
ignition when you leave the vehicle,
even for a short time. Lost keys
Visit a PEUGEOT dealer with
the vehicle's V5 registration
d o c u m e n t a n d y o u r p e r s o n a l i d e n t i fi -
cation documents.
The PEUGEOT dealer will be able to re-
trieve the key code and the transponder
code required to order a replacement key.
Page 116 of 249
8DRIVING
100
Selecting the function
Place switch 1 in the LIMIT posi-
tion. The limiter is not yet active.
By default the display indicates:
Switching the function off
Place switch 1 in position 0 or
CRUISE or switch off the ignition
to switch the system off. The last
speed programmed remains in the
memory.
Memorising a speed
A speed can be memorised without
activation of the limiter.
Pressing buttons 2 and 3 decreases or
increases the speed.
Short press: +/- 1 mph (1 km/h)
Long press: +/- 5 mph (5 km/h)
Maintained press: continuous increase
or decrease of the value in steps of
5 mph (5 km/h). Activation/deactivation of the limiter
Pressing button
4 activates the limiter,
pressing this button again deactivates it.
When the limiter is active, the display
indicates (e.g. at 70 mph (110 km/h)):
On a steep descent or if the
driver accelerates sharply, the
speed limiter, which does not
act on the brakes, is not able
to prevent the vehicle from exceeding
the programmed speed.
In no circumstances does the speed
limiter replace the requirement to re-
spect speed limits, nor does it replace
the need for vigilance and responsibi-
lity on the part of the driver.
The driver must remain vigilant and
stay in complete control of his vehicle.
The operations must be car-
ried out with the engine run-
ning.
Speed limiter function
This prevents the vehicle speed ex-
ceeding the speed programmed by
the driver (minimum speed of 18 mph
(30 km/h)).
Page 160 of 249
141
0 2 VOICE COMMANDS AND STEERING MOUNTED CONTROLS
RADIO: selection of the next stored station. MP3/USB/JUKEBOX: selection of the next directory. Selection of the next item on a menu.
RADIO: selection of the previous stored station. MP3/USB/JUKEBOX: selection of the previous directory. Selection of the previous item on a menu.
RADIO: automatic search for a higher frequency. CD/MP3/USB/JUKEBOX: selection of the next track. CD/USB: continuous press: fast forwards play.
RADIO: automatic search for a lower frequency. CD/MP3/USB/JUKEBOX: selection of the previous track. CD/USB: continuous press: fast backwards play.
- Change of sound source. - C o n fi r m a t i o n o f a s e l e c t i o n . - Pick up/Hang up the telephone. - Press for more than 2 seconds: access to the telephone menu.
Volume increase.
Volume decrease.
Mute: by pressing the volume increase and decrease buttons simultaneously.
The sound is restored by pressing one of the two volume buttons.
Page 178 of 249
159
11
2 2
3 3
4 4
11
2 2
3 3
4 4
AUDIO/VIDEO
RADIO
SELECTING A STATION
Press the SOURCE button several times in succession and select the RADIO.
Press the BAND button to select a waveband: FM1, FM2, FMast, AM.
B r i e fl y p r e s s o n e o f t h e b u t t o n s t o carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST button to display the list of stations received locally (60 maximum). To update this list, press for more than two seconds.
The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception, including in RDS mode. This is a normal effect of t he way in which radio waves are transmitted and doe s not indicate any failure of the audio equipment.
RDS
Select ACTIVATE FREQUENCY FOLLOWING (RDS) then press OK. RDS appears on the display.
Select the FM WAVEBAND PREFERENCES function then press OK.
Select AUDIO FUNCTIONS then press OK.
Press the MENU button.
The RDS, if displayed, enables you to continue lis tening to the same station by automatic retuning to alternative fequen cies. However, in certain conditions, coverage of an RDS station may not be assured throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
ACTIVATE FREQUENCY FOLLOWING (RDS)
FM WAVEBAND PREFERENCES
Page 179 of 249
160
11
2 2
0 6 AUDIO/VIDEO
INFORMATION AND ADVICE
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3, is an audio compression standard which permits the recording of s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c .
In order to be able to play a recorded CDR or CDRW, when recording it is preferable to select standards ISO 9660 level 1.2 or Joliet. If the disc is recorded in another format, it may not be played correctly. It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible (4x maximum) for optimum sound quality. In the particular case of a multi-session CD, the Joliet standard is recommended.
T h e a u d i o e q u i p m e n t w i l l o n l y p l a y fi l e s w i t h t h e e x t e n s i o n " . m p 3 " w i t h a s a m p l i n g r a t e o f 2 2 . 0 5 K H z o r 4 4 . 1 K H z . N o o t h e r t y p e o f fi l e (.wma, .mp4, .m3u...) can be played.
I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s w i t h o u t u s i n g special characters (e.g. " ? ; ù) to avoid any play ing or displaying problems.
Insert circular compact discs only. Some anti-pira ting systems, on original discs or CDs copied using a personal recorder, may generate malfunctions regardless of the quality of the original player. Insert an audio CD or an MP3 compilation in the pl ayer, play begins automatically.
If the player already contains a disc, press the SOURCE button several times in succession and select CD to listen to it.
Press one of the buttons to select a track on the CD. Press the LIST button to display the list of tracks on the CD or of the directories of the MP3 compilation.
The playing and displaying of an MP3 compilation m ay depend on the recording programme and/or the parameter settin gs used. We recommend use of the ISO 9660 recording standard.
M P 3 C D
P L A Y I N G A C D O R A N M P 3 C O M P I L A T I O N
CD
Empty CDs are not recognised and may damage the s ystem.