PEUGEOT 407 C 2005 Owner's Guide

Multifunction displays36 -
04-11-2005
37Multifunction displays-
04-11-2005
Display coniguration
- "Select the colours": selection of colours available for the display.
- "Brightness and intensity".
- "Sound": selection of the sound ambiance, setting of the voice
synthesiser and of the voice com-
mands.
- "International parameters": setting of the date and time, selection of
the units.
-
"Selection of the language": (German,
Spanish, French, English, Italian,
Dutch, Portuguese and Brazilian
Portuguese. "Video" menu
Deine the vehicle parameters
This enables you to activate or
deactivate certain driving and com-
fort functions:
- "Automatic switching on of the
headlamps",
- "Follow-me-home lighting" and "Duration",
- "Remote control action",
- "Directional headlamps",
- "Permanent locking of the boot".
Example: "Automatic switching on of
the headlamps"
You can connect video equipment
(camcorder, digital camera, DVD
player, ...) to the three video sockets,
located in the glove box.
Videos can only be displayed
when stationary.
Select the "Video" menu from the
general menu :
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the display format, the brightness, the
contrast and the colours.
Pressing the "DARK" button discon-
nects the display from the video.
Successive presses on the "SOURCE"
button permit the selection of an audio
source other than that of the video.
For safety reasons, con-
iguration of the multifunction
displays by the driver must
take place when stationary.

Comfort38 -
04-11-2005
39Comfort-
04-11-2005
For even air distribution, take care
not to obstruct the exterior air intake
grille located at the bottom of the
windscreen, the vents, the air out-
lets under the front seats and the air
extractor located behind the laps in
the boot.
In certain cases of particularly arduous
use (towing the maximum load on a
steep gradient in hot weather), cutting
off the air conditioning permits recovery
of the engine power and therefore im-
provement of the towing capacity.
Close the windows to beneit from
the full effectiveness of the air
conditioning.
Ensure that the passenger compart-
ment ilter is in good condition. Have
the ilter elements replaced periodical-
ly. If you drive in a dusty environment,
replace it twice as often.
The air conditioning system does not
contain chlorine and is not harmful to
the ozone layer.
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month, to keep it in perfect working
order.
The water formed by the air condi-
tioning condensation is discharged
via an opening provided for this pur-
pose. Therefore, a puddle of water
may form underneath the vehicle
when stationary.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.1.
Centre panel vents.
2. Temperature and humidity
sensor.
3. Adjustment of the glove box
air low (see section "Interior
layout").
4. Air outlet to passenger
footwells.
5. Two ventilation vents at
the rear at the base of the
centre console between the
passengers.
6. Side vents.
7. Front windows de-icing or
demisting vents.
8. Windscreen de-icing or
demisting vents.
9. Sunshine sensor.
10. Air diffuser grille.
AUTOMATIC REGULATION OF
THE AIR CONDITIONING
Air diffuser
The air diffuser grille, located at the
top of the centre console, signiicantly
improves distribution and lows and
prevents air currents, while maintaining
an optimum temperature inside the pas-
senger compartment.
Advice on operation
To obtain even ventilation,
avoid closing the air diffuser
grille 10.
In hot weather, in order to obtain
intense ventilation, you can close the
air diffuser grille 10 and use vents 1
and 6 only.
If, when the vehicle has been parked
in the sun for a long time, the interior
temperature remains very high, do
not hesitate to ventilate the passen-
ger compartment for a few minutes.
Use of the automatic regulation of the
air conditioning is recommended. It
permits automatic and optimised con-
trol of all of the following functions:
air low, passenger compartment
temperature and air distribution, by
means of various sensors (exterior
temperature, interior temperature,
sunshine), so preventing the need for
you to change your reference settings
other than the value displayed. In ad-
dition, a humidity sensor anticipates
the formation of condensation in the
vehicle during its use.
Do not cover the temperature and
humidity sensor 2 and the sunshine
sensor 9.
They are required for regulation of
the air conditioning.

Comfort38 -
04-11-2005
39Comfort-
04-11-2005

Comfort40 -
04-11-2005
41Comfort-
04-11-2005
AUTOMATIC AIR
CONDITIONING (DUAL ZONE)
Dual zone: this is the differentiated
regulation of the temperature and air
distribution on the driver's side and
the front passenger side.
The driver and his front passenger
can each adjust the temperature and
the distribution of the air to suit their
requirements.
The symbols and messages associ-
ated with the automatic air conditioning
controls appear on the multifunction
display.
Control by the Auto programme
Automatic
programme - driver
and passenger
comfort (1)
Press the "AUTO" button. The indi-
cator light comes on. The "AUTO"
symbol is displayed on the multi-
function display.
Depending on the level of comfort
selected, the system controls the air
distribution, low, temperature and
intake of air in order to guarantee
comfort and an adequate circulation
of air in the passenger compartment.
You do not have to make any adjust-
ments.
When the engine is cold, to
prevent too great a distribu-
tion of cold air, the ventilation
will only reach its optimum
level progressively.

Comfort40 -
04-11-2005
41Comfort-
04-11-2005
Adjustment of the
temperature on the
driver's side (2)
Adjustment of the
temperature on the
passenger side (3)
F Press the up or down arrow to
change the temperature on the
driver's side 2 or passenger side 3.
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the choice of coniguration validated
on the display.
A setting around the value 21 makes
it possible to obtain optimum comfort.
However, depending on your require-
ments, a setting between 18 and 24
is usual.Blower (4)
Air low
F Turn dial 4 to the
right to increase the
air low or to the left
to reduce it.
F Turn the dial 4 to
the left until the low
of air stops. The
"OFF" symbol is displayed on
the multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system's
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
Avoid driving for too long with the air
conditioning deactivated.
To reactivate the air conditioning:
F Press button 1, 2 or 3.
Deactivation of the air
conditioning
The air low symbol (fan) is displayed
on the multifunction display and is illed
in in relation to the value required.
To prevent condensation and dete-
rioration of the quality of the air in
the passenger compartment, ensure
that an adequate low of air is main-
tained. Adjustment of
the driver's air
distribution (5)
Successive or continuous pressure on
button
5 or 6 enables you to direct the
low of air on the driver's side or on the
passenger side independently.
The symbol (arrows) corresponding
to the chosen direction 5 or 6 is dis-
played on the multifunction display. 5 Windscreen and front side
windows.
3 Front and rear ventilation.
6 Front and rear footwells.
AUTO Automatic distribution. Adjustment of
the passenger air
distribution (6)
Control via the manual controls
It is possible to adjust one or more
functions manually while leaving the
other functions in automatic mode.
The
"AUTO" button indicator light is
switched off.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and is not ad-
vantageous (comfort).
To return to automatic mode, press
the "AUTO" button.
On entering the vehicle, the
interior temperature may be
much colder (or warmer)
than is comfortable. There is
no need to change the tem-
perature displayed in order to obtain
rapidly the level of comfort required.
The automatic regulation of the air
conditioning will use its maximum
performance settings to correct the
temperature difference as quickly as
possible.

Comfort42 -
04-11-2005
43Comfort-
04-11-2005
Front visibility
control (7)
In certain cases, the comfort programme
may not be suficient to demist or de-ice
the windows (humidity, several passen-
gers, ice).
F In this case, select the front visi-
bility programme in order to clear
the windows quickly. The indicator
light comes on.
It controls the air conditioning, air
low and intake and distributes the
ventilation to the windscreen and
front side windows.
The front visibility control symbol
is displayed on the multifunction
display.
Once the inconvenience has been
eliminated, pressing button 1 returns
the system to the comfort setting. Intake of exterior
air/Recirculation of
interior air (8)
This function enables you to isolate
the passenger compartment from
exterior fumes and odours.
F Press button 8 several times
to set the air intake mode, the
indicator light which corresponds
to the mode set comes on at your
preference:
- intake of exterior air. Forced exterior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator light which corres- ponds to the mode set comes on.
Prolonged operation in interior air
recirculation mode may result in
the formation of condensation and
deterioration of the quality of the
interior air.
Do not drive in air recirculation mode for prolonged periods, except in truly
exceptional atmospheric conditions.
The message associated with the control is displayed on the multi-
function display.
F Press button 8 to return to auto-
matic control of the air intake.
For your comfort, when the igni-
tion is switched off, the settings
are stored until it is switched on
again. Rear screen
demisting (9)
The heated rear screen operates
independently of the air conditioning
system.
F Press button 9, with the engine
running, to demist the rear screen
and the mirrors. The indicator light
comes on.
Demisting is switched off automatically
to avoid an excessive consumption of
current and in relation to the exterior
temperature.
It may be stopped by pressing
button 9 again or when the engine is
switched off.
However, the demisting resumes
if the engine is switched on again
within one minute.
Switch off the rear screen and exterior
mirrors demisting when you consider
this necessary as low current con-
sumption reduces fuel consumption.

Comfort42 -
04-11-2005
43Comfort-
04-11-2005
Deactivation of the air
conditioning (AC-OFF)
Deactivation may result in discomfort
(temperature, humidity, odour, con-
densation).
You can cancel the deactivation by
pressing the "AUTO" button or the
blower 4 on the air conditioning con-
trol panel.
Deactivation or activation of the
simultaneous Left-Right control
Activation of this function permits the
transfer of the driver's coniguration
to the passenger.
Deactivation of this function permits
a return to the independent driver/
passenger settings.
Any manual action on button 4 or 6
cancels the simultaneous conigura-
tion setting.
"AIR CON" menu
Press the "MENU"
button to gain access
to the general menu,
then conirm.
The "General menu" appears on
the multifunction display.
Select the Air Conditioning icon
using the navigator buttons.
The "Air Conditioning" menu
appears on the multifunction display
as the main display.
Additional heating*
Vehicles which are itted with an HDI
engine may be equipped with auto-
matic additional heating to improve
your comfort.
When the engine is idling or when the
vehicle is stationary, a high-pitched
whistling noise and the emission of
a small amount of smoke and odour
is normal.
* According to country.

Comfort44 -
04-11-2005
45Comfort-
04-11-2005
EXTERIOR MIRRORS
Automatic tilting of the
mirrors in reverse gear*
This function allows you to see the
ground (kerb, wall...) when carrying
out parking manoeuvres in reverse
gear.Objects observed in the
driver and passenger mirrors
are, in reality, closer than
they appear.
This must be taken into account in
order to judge the distance of
vehicles approaching from behind
correctly.
Adjustment
F
Move control A to the right or to
the left to select the corresponding
mirror.
F Direct control B in all four directions
to adjust.
Folding back the mirrors electrically
- from inside:
F With the ignition on, move the
control A to the central position
then pull it rearwards.
- from outside:
F Lock the vehicle using the remote
control.
This function can be deactivated.
Contact your PEUGEOT dealer.
When the vehicle is parked, the
exterior mirrors can be folded back
manually. Initial setting of the function
Engage reverse gear then select and
adjust the left mirror then the right
mirror.
These settings will be stored.
Tilting the mirror to the parking
position
F
engage reverse gear,
F move control A to the right or the
left to select the corresponding
mirror.
The exterior mirror corresponding to
the side on which you are parking
tilts downwards.
Intentional returning of the mirror to
the driving position:
F deselect the mirror.
F change out of reverse gear. After
a few seconds, the glass of the
corresponding mirror resumes its
normal position.
The mirror returns to the driving
position automatically if the vehicle
speed exceeds 6 mph (10 km/h) or if
the engine is switched off.
* According to version.

Comfort44 -
04-11-2005
45Comfort-
04-11-2005
INTERIOR MIRROR
Automatic day/night interior
mirror
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens auto-
matically depending on the intensity
of the light from behind. It clears as
the light (headlamps of following ve-
hicles, sunlight) decreases, ensuring
maximum visibility.Operation
Switch on the ignition and press
switch
1:
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic
system off. The mirror remains at
its most clear.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other,
push or pull the lever on the lower
edge of the mirror.
Special feature
To ensure maximum visibility
during manoeuvres, the mir-
ror clears automatically when
reverse gear is engaged.

Comfort46 -
04-11-2005
47Comfort-
04-11-2005
ELECTRIC ADJUSTMENT OF
THE HEIGHT AND DEPTH OF
THE STEERING WHEEL*
When stationary, adjust the height
or depth of the steering wheel by
moving the control: F forwards or backwards to adjust
the depth.
F up or down to adjust the height.
You can activate or
deactivate this function
via the "personalisation-
coniguration" menu on
the multifunction display.
WELCOME FUNCTION*
When the driver's door is opened
with the ignition off, the steering
wheel rises to make access to or exit
from the vehicle easier.
MANUAL STEERING WHEEL
HEIGHT AND DEPTH
ADJUSTMENT
When the vehicle is stationary, un-
lock the steering wheel by pushing
the control forwards.
Adjust the height and depth of the
steering wheel then lock by pulling
the control fully.
* During the year.