buttons Peugeot 407 C 2008 Owner's Manual
Page 10 of 211
Switch on the ignition and press switch 1 :
- indicator light 2 on (switch pressed):
automatic operation.
- indicator light 2 off: automatic sys-
tem off. The mirror remains at its
clearest status.
A. Exterior mirrors selection,
adjustment and folding control.
1. Selection of the driver's mirror.
2. Selection of the passenger mirror.
3. Folding of the mirrors.
Interior mirror adjustment
49
48
Exterior mirrors adjustment Memorising driving positions
The memorisation takes into account the
electric adjustment of the driver's seat,
steering wheel and exterior mirrors.
You can memorise two driving positions
using buttons M/1 and M/2 .
55
Page 32 of 211
2
33
COLOUR SCREEN C
This displays the following informa-
tion, via the WIP Sound audio system
control pad:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k
of ice),
- t h e a c c e s s e s c h e c k ,
- the warning messages,
- the audio functions,
- the trip computer information,
-
t h e p e r s o n a l i s a t i o n a n d c o n fi g u r a t i o n
displays,
- the air conditioning parameters,
-
t h e f r o n t a n d r e a r p a r k i n g a s s i s t a n c e
display,
- t h e h a n d s - f r e e k i t d i s p l a y s . Management of the displays
General menu
Press the
"MENU" button to gain ac-
cess to the general menu and select
one of the following functions:
- "Audio functions",
- "Trip computer",
- " P e r s o n a l i s a t i o n - C o n fi g u r a t i o n " ,
- "Air conditioning",
- " T e l e p h o n e " . " P e r s o n a l i s a t i o n - C o n fi g u r a t i o n "
menu
This provides access to successive
c o n fi r m a t i o n w i n d o w s .
D e fi n i n g t h e v e h i c l e p a r a m e t e r s
This enables you to activate or de-
activate certain driving and comfort
elements:
-
"Automatic switching on of the lights", - "Follow-me-home lighting" and
"Duration",
- "Remote control action",
- " P e r m a n e n t l o c k i n g o f t h e b o o t " ,
- " D i r e c t i o n a l h e a d l a m p s " .
Example: "Automatic switching on of
the lights"
The
"AUDIO" , "TRIP" , "CLIM" and
"TEL" buttons on the RD4 audio
equipment control pad permit display-
i n g i n t h e m a i n w i n d o w .
Example: "TRIP"
Example: "Audio functions"
Page 42 of 211
3
43
Deactivation of the air conditioning
(A/C-OFF)
Deactivation or activation of the
simultaneous Left-Right control
A c t i v a t i o n o f t h i s f u n c t i o n p e r m i t s t h e
t r a n s f e r o f t h e d r i v e r ' s c o n fi g u r a t i o n t o
t h e p a s s e n g e r .
D e a c t i v a t i o n o f t h i s f u n c t i o n p e r m i t s a
r e t u r n t o t h e i n d e p e n d e n t d r i v e r / p a s -
senger settings.
A n y m a n u a l a c t i o n o n b u t t o n 4 or 6
c a n c e l s t h e s i m u l t a n e o u s c o n fi g u r a -
tion setting.
"AIR CON" menu
Press the "MENU" b u t -
ton to gain access to
the general menu, then
c o n fi r m .
The "General menu" a p p e a r s o n t h e
m u l t i f u n c t i o n d i s p l a y .
Select the Air Conditioning icon using
the navigator buttons.
The "Air Conditioning" m e n u a p -
p e a r s o n t h e m u l t i f u n c t i o n d i s p l a y a s
t h e m a i n d i s p l a y .
Additional heating *
V e h i c l e s w h i c h a r e fi t t e d w i t h a n H D I
e n g i n e m a y b e e q u i p p e d w i t h a u t o -
m a t i c a d d i t i o n a l h e a t i n g t o i m p r o v e
y o u r c o m f o r t .
When the engine is idling or when the
v e h i c l e i s s t a t i o n a r y , a h i g h - p i t c h e d
whistling noise and the emission of a
small amount of smoke and odour is
normal.
* A c c o r d i n g t o c o u n t r y .
D e a c t i v a t i o n m a y r e s u l t i n d i s c o m f o r t
( t e m p e r a t u r e , h u m i d i t y , o d o u r , c o n -
d e n s a t i o n ) .
Y o u c a n c a n c e l t h e d e a c t i v a t i o n b y
p r e s s i n g t h e
"AUTO" button on the air
c o n d i t i o n i n g c o n t r o l p a n e l .
Page 43 of 211
3
44
PROGRAMMABLE HEATING Programming remote control
T h e h e a t i n g s y s t e m p r o g r a m m i n g r e -
mote control consists of the following
b u t t o n s a n d d i s p l a y s :
1. Scrolling functions menu buttons.
2. Function indicator lights: clock,
t e m p e r a t u r e , o p e r a t i n g t i m e , p r o -
g r a m m e d t i m e , h e a t e r o p e r a t i o n ,
h e a t i n g m a n a g e m e n t s y m b o l s .
3. D i g i t a l d i s p l a y s : t i m e , t e m p e r a t u r e ,
d u r a t i o n o f o p e r a t i o n , p r o g r a m m e d
time or level of heating.
4. Off button.
5. On button.
Displaying the functions
If a malfunction of the programma-
ble heating system occurs, contact
a PEUGEOT dealer.
T h e p r o g r a m m a b l e h e a t i n g o p e r a t e s
i n d e p e n d e n t l y o f t h e e n g i n e .
W h e n t h e e n g i n e i s o f f , i t p r e - h e a t s
t h e c o o l a n t c i r c u i t i n o r d e r t o b e n e fi t
f r o m a n o p t i m u m e n g i n e o p e r a t i n g
t e m p e r a t u r e f r o m t h e t i m e t h e e n g i n e
is switched on.
T h e p r o g r a m m a b l e h e a t i n g s y s t e m
is switched on using the long range
r e m o t e c o n t r o l . A c t i v a t i o n c a n b e i m -
m e d i a t e o r d e f e r r e d b y m e a n s o f a
p r o g r a m m i n g f u n c t i o n .
screen
Press the buttons
1 in succession to
d i s p l a y t h e f u n c t i o n s .
T h e fi r s t p r e s s o f t h e l e f t - h a n d o r r i g h t -
h a n d b u t t o n d i s p l a y s t h e t i m e .
N e x t , t h e l e f t - h a n d b u t t o n p e r m i t s a c -
c e s s t o t h e p r o g r a m m i n g t i m e t h e n t o
t h e l e v e l o f h e a t i n g ( C 1 t o C 5 ) .
T h e r i g h t - h a n d b u t t o n p e r m i t s a c c e s s
t o t h e p a s s e n g e r c o m p a r t m e n t t e m -
p e r a t u r e t h e n t o t h e d u r a t i o n o f o p e r a -
tion of the heater if it is to be switched
o n i m m e d i a t e l y .
T h e p a s s e n g e r c o m p a r t m e n t
t e m p e r a t u r e i n f o r m a t i o n i s o n l y
available when the engine is off.
Page 44 of 211
3
45
O n c e t h e t i m e h a s b e e n d i s p l a y e d , b y
means of the buttons 1 , p r e s s b u t t o n s
4 and 5 s i m u l t a n e o u s l y w i t h i n 1 0 s e c o n d s .
T h i s s y m b o l fl a s h e s .
Setting the time
Set the time using the buttons 1 .
Press buttons 4 and 5 s i m u l t a n e o u s l y
to save it.
T h i s s y m b o l i s d i s p l a y e d ( fi x e d ) . Press button
5 ( O N ) u n t i l t h e m e s s a g e
"OK" a p p e a r s .
When the signal has been received,
the message "OK" i s d i s p l a y e d a l o n g
w i t h t h e d u r a t i o n o f o p e r a t i o n .
T h e h e a t e r s t a r t s a n d t h i s s y m b o l
i s d i s p l a y e d .
Immediate activation
T o d e a c t i v a t e t h e f u n c t i o n , p r e s s b u t -
ton 4 ( O F F ) u n t i l t h e m e s s a g e "OK"
a p p e a r s .
W h e n c a r r y i n g o u t t h e s e o p e r -
ations, if the message "FAIL"
a p p e a r s , t h e s i g n a l h a s n o t
b e e n r e c e i v e d . R e p e a t t h e
p r o c e d u r e a f t e r c h a n g i n g y o u r
location.
T h i s s y m b o l i s s w i t c h e d o f f .
Setting the duration of operation
Press the buttons
1 t o d i s p l a y t h e d u -
r a t i o n o f o p e r a t i o n .
T h i s s y m b o l i s d i s p l a y e d .
O n c e t h e d u r a t i o n o f o p e r a t i o n h a s
b e e n d i s p l a y e d , p r e s s b u t t o n s 4 and 5
s i m u l t a n e o u s l y w i t h i n 1 0 s e c o n d s .
T h i s s y m b o l fl a s h e s .
S e t t h e d u r a t i o n b y p r e s s i n g t h e b u t -
tons 1 ( a d j u s t m e n t i n s t e p s o f 1 0 m i n s
a n d m a x v a l u e 3 0 m i n s ) .
Press buttons 4 and 5 s i m u l t a n e o u s l y
t o s a v e t h e d u r a t i o n o f o p e r a t i o n .
T h i s s y m b o l i s d i s p l a y e d ( fi x e d ) .
T h e f a c t o r y s e t t i n g v a l u e i s
30 minutes.
Page 45 of 211
3
46
Y o u m u s t p r o g r a m m e y o u r d e p a r t u r e
t i m e i n o r d e r f o r t h e s y s t e m t o c a l c u -
l a t e t h e o p t i m u m h e a t e r s t a r t t i m e a u -
t o m a t i c a l l y .
Programming the heating
S e t t h e t i m e b y p r e s s i n g t h e b u t t o n s 1
a n d p r e s s b u t t o n s 4 and 5 s i m u l t a n e -
o u s l y t o s a v e i t .
Programming the departure time
Press the buttons
1 t o d i s p l a y t h e p r o -
gramming time.
T h i s s y m b o l i s d i s p l a y e d .
O n c e t h e p r o g r a m m i n g t i m e h a s b e e n
d i s p l a y e d , p r e s s b u t t o n s 4 and 5 s i -
m u l t a n e o u s l y w i t h i n 1 0 s e c o n d s .
T h i s s y m b o l fl a s h e s .
T h i s s y m b o l i s d i s p l a y e d ( fi x e d ) . O n c e t h e p r o g r a m m i n g t i m e h a s b e e n
d i s p l a y e d b y m e a n s o f t h e b u t t o n s
1 ,
p r e s s b u t t o n 5 ( O N ) u n t i l t h e m e s s a g e
"OK" a p p e a r s .
Activation - deactivation
When the signal has been received,
the message
"OK" i s d i s p l a y e d
a l o n g w i t h t h e s y m b o l "HTM" .
T o d e a c t i v a t e t h e p r o g r a m m i n g , p r e s s
button 5 ( O F F ) u n t i l t h e m e s s a g e
"OK" a p p e a r s .
H T M : H e a t T h e r m o M a n a g e m e n t .
T h e s y m b o l "HTM" is switched off.
W h e n c a r r y i n g o u t t h e s e o p e r a -
tions, if the message "FAIL" a p -
p e a r s , t h e s i g n a l h a s n o t b e e n
r e c e i v e d . R e p e a t t h e p r o c e d u r e
a f t e r c h a n g i n g y o u r l o c a t i o n .
T h i s s y m b o l i s d i s p l a y e d w h e n
the heater starts.
Switching off the heating
Press button
5 ( O N ) .
T h e s y m b o l "HTM" remains on.
Changing the level of heating
T h e s y s t e m o f f e r s 5 levels of heating
(from the lowest level C1 t o t h e h i g h -
est level C5 ) .
Once the level of heating has been
d i s p l a y e d b y m e a n s o f t h e b u t t o n s 1 ,
p r e s s b u t t o n s 4 and 5 s i m u l t a n e o u s l y .
The letter "C" fl a s h e s .
S e t t h e l e v e l o f h e a t i n g b y p r e s s i n g
the buttons 1 .
Press buttons 4 and 5 s i m u l t a n e o u s l y
to save the level selected. The letter
"C" i s d i s p l a y e d ( fi x e d ) .
T h e f a c t o r y p r e - s e t s a r e r e -
p l a c e d b y t h e n e w s e t t i n g s e n -
t e r e d . T h e p r o g r a m m e d t i m e s
are stored until the next time
t h e y a r e c h a n g e d .
W h e n t h e d e p a r t u r e t i m e i s a c t i -
vated, the level of heating cannot be
c h a n g e d . T h e d e p a r t u r e t i m e m u s t b e
d e a c t i v a t e d fi r s t .
Page 56 of 211
3
Memorising driving positions
T h e e l e c t r i c a l a d j u s t m e n t s o f t h e d r i v -
er’s seat, steering wheel and exterior
mirrors are memorised.
T w o d r i v i n g p o s i t i o n s c a n b e m e m o -
rised using buttons M/1and M/2 . A n a u d i b l e s i g n a l c o n fi r m s t h a t a p o s i -
tion has been memorised.
M e m o r i s i n g a n e w p o s i t i o n c a n c e l s
t h e p r e v i o u s o n e .
Recalling a memorised driving
position
During access to the rear
s e a t s , t h e m e m o r i s i n g a n d r e -
c a l l i n g o f t h e d r i v i n g p o s i t i o n s
are deactivated.
Vehicle moving
K e e p b u t t o n 1 or 2 p r e s s e d d o w n
u n t i l t h e b l e e p i n d i c a t e s t h a t s e t -
t i n g o f t h e c o r r e s p o n d i n g m e m o -
r i s e d p o s i t i o n i s c o m p l e t e .
REAR HEAD RESTRAINTS
T h e r e a r h e a d r e s t r a i n t s h a v e a h i g h p o s i -
t i o n f o r u s e a n d a l o w p o s i t i o n f o r s t o r i n g .
T h e y c a n a l s o b e r e m o v e d .
T o r e m o v e t h e m , p u l l u p w a r d s f u l l y
a n d p r e s s t h e l u g .
N e v e r d r i v e w i t h t h e h e a d r e -
s t r a i n t s r e m o v e d ; t h e y m u s t
b e i n p l a c e a n d a d j u s t e d c o r -
r e c t l y .
Memorising using the controls on
the driver’s door
To memorise:
P l a c e t h e k e y i n t h e i g n i t i o n o n p o -
sition,
A d j u s t y o u r s e a t , s t e e r i n g w h e e l
and mirrors,
Press button M , then button 1 " fi r s t
d r i v i n g p o s i t i o n " o r b u t t o n 2 " s e c -
o n d d r i v i n g p o s i t i o n " w i t h i n f o u r
seconds. Ignition on, vehicle stationary
B r i e fl y p r e s s b u t t o n 1 or 2 to recall
t h e c o r r e s p o n d i n g m e m o r i s e d p o -
s i t i o n . T h e e n d o f t h e s e t t i n g i s i n -
d i c a t e d b y a b l e e p .
A f t e r r e c a l l i n g a m e m o r i s e d p o s i t i o n
a f e w t i m e s i n s u c c e s s i o n , t h e f u n c -
tion will be cancelled until the engine
is started.
Page 109 of 211
8
98
CRUISE CONTROL/SPEED LIMITER
Selecting the function
Place switch 1 in the LIMIT posi-
tion. The limiter is not yet active.
By default the display indicates:
Switching the function off
Place switch 1 in position 0 or
CRUISE or switch off the ignition
to switch the system off. The last
speed programmed remains in the
memory.
Memorising a speed
A speed can be memorised without
activation of the limiter.
Pressing buttons 2 and 3 decreases or
increases the speed.
Short press: +/- 1 mph (1 km/h)
Long press: +/- 5 mph (5 km/h)
Maintained press: continuous increase or
decrease of the value in steps of 5 mph
(5 km/h).
Activation/deactivation of the
limiter
Pressing button 4 activates the limiter,
pressing this button again deactivates it.
When the limiter is active, the display
indicates (e.g. at 70 mph (110 km/h)):
The operations must be carried
out with the engine running.
On a steep descent or if the
driver accelerates sharply, the
speed limiter, which does not
act on the brakes, is not able
to prevent the vehicle from exceeding
the programmed speed.
In no circumstances does the speed
limiter replace the requirement to re-
spect speed limits, nor does it replace
the need for vigilance and responsibil-
ity on the part of the driver.
The driver must remain vigilant and
stay in complete control of his vehicle.
Limiter function
This prevents the vehicle speed ex-
ceeding the speed programmed by
the driver (minimum speed of 18 mph
(30 km/h)).
Page 156 of 211
1
2 2
3 3
4 4
11
2 2
3 3
4 4
0 5
143
A U D I O / V I D E O
R A D I O
S E L E C T I N G A S T A T I O N
Press the SOURCE button several times in succession and select the RADIO.
Press the BAND button to select a waveband: FM1, FM2, FMast, AM.
B r i e fl y p r e s s o n e o f t h e b u t t o n s t o carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST button to display the list of stations received locally ( 6 0 m a x i m u m ) . To update this list, press for more than two seconds.
T h e e x t e r n a l e n v i r o n m e n t ( h i l l s , b u i l d i n g s , t u n n e l s , b a s e m e n t c a r p a r k s , . . . ) m a y b l o c k r e c e p t i o n , including in RDS mode. This is a normal effect of t he way in which radio waves are transmitted and doe s not indicate any failure of the audio equipment.
R D S
Select ACTIVATE FREQUENCY F O L L O W I N G ( R D S ) t h e n p r e s s O K . RDS appears on the display.
Select the FM BAND PREFERENCES function then press OK.
Select AUDIO FUNCTIONS then press OK.
Press the MENU button.
The RDS, if displayed, enables you to continue lis tening to the same station by means of frequency following. Howev er, in certain conditions, this RDS station is not followed throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
F M B A N D P R E F E R E N C E S
A C T I V A T E F R E Q U E N C Y F O L L O W I N G ( R D S )
Page 157 of 211
11
2 2
0 5
144
A U D I O / V I D E O
M P 3 C D
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,is an audio compression standard which permits the recording of s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c .
In order to be able to play a recorded CDR or CDRW , when recording it is preferable to select standards ISO 9660 level 1.2 or Joliet. If the disc is recorded in another format, it may not be played correctly. It is recommended that the same recording standard is always used f o r a n i n d i v i d u a l d i s c , w i t h a s l o w a s p e e d a s p o s s i b l e ( 4 x m a x i m u m ) for optimum sound quality. In the particular case of a multi-session CD, the Joliet standard is recommended.
T h e a u d i o e q u i p m e n t w i l l o n l y p l a y a u d i o fi l e s w i t h t h e e x t e n s i o n ".mp3" with a sampling rate of 22.05 KHz or 44.1 KH z. No other type o f fi l e ( . w m a , . m p 4 , m 3 u . . . ) c a n b e p l a y e d .
I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s w i t h o u t u s i n g s p e c i a l c h a r a c t e r s ( e . g . : " " ? ; ù ) t o a v o i d a n y p l a y i n g o r d i s p l a y i n g problems.
P L A Y I N G A C D O R A N M P 3 C O M P I L A T I O N
Insert circular compact discs only. Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may generate malfunctions regardless of the quality of the original player. Insert an audio CD or an MP3 compilation in the pl ayer, play begins automatically.
If the player already contains a disc, press the SOURCE button several times in succession and select CD to listen to it.
Press one of the buttons to select a track on the CD. Press the LIST button to display the list of tracks on the CD or of the directories of the MP3 compilation.
The playing and displaying of an MP3 compilation m ay depend on the recording programme and/or the parameter settin gs used. We recommend use of the ISO 9660 recording standard.
I N F O R M A T I O N A N D A D V I C E
C D