fog light Peugeot 407 C 2008 Owner's Manual

Page 12 of 211

The position is indicated on the instrument panel by the corresponding indicator light.
Ring A
Automatic switching on of
the lights
Activate or deactivate the
function from the multifunction
display confi guration menu.
Ring B
Front fog lamps (one press)
Front fog lamps and rear
fog lamps (two presses)

 74
2. Fast wipe.

1. Normal wipe.

I. Intermittent wipe.

0. Park.

AUTO. Automatic wipe then single wipe.

A. Wash-wipe.

 77
Wipers Lighting
Lights off
Automatic switching on of
the lights.
Side lights
Dipped headlamps/Main
beam headlamps

Page 17 of 211

1
20

1. Coolant temperature indicator dial.

2. Lights on indicators:
dipped headlamps.
main beam headlamps.
front fog lamps.
rear fog lamps.

3. Rev counter dial.

4. Warning lights:
seat belts not fastened in the front.
fuel level.
left direction indicator.

5. Fuel level indicator dial.
5 - DIAL PETROL-DIESEL MANUAL AND AUTOMATIC GEARBOX INSTRUMENT PANELS

10. CHECK and trip recorder zero re-
set and service display button.

11. Instrument panel display:
Total distance recorder.
Trip recorder.
Cruise control/ speed limiter refer- ence value.
Service indicator.
Direction advice (navigation)
CHECK (vehicle autotest).
Trip computer information displays.
Warning and status displays.

6. Warning lights:
handbrake applied or brake fl uid level or electronic brake force dis-
tribution fault.
right direction indicator.

7. Speedometer dial.

8. Warning lights:
emission control system.
anti-lock braking system (ABS).
passenger air bag disarmed.
pre-heat (Diesel engine starting).

9. Engine oil temperature indicator
dial. Automatic gearbox lever position
indicator.

12. Instrument panel lighting rheostat.

Page 82 of 211

5
74
LIGHTS STALK
Lights off
Side lights Dipped/main beam head-
lamps Lights on
With the ignition and the automatic
lights function switched off, on open-
ing the driver's door a buzzer sounds
to warn you that you have left your
lights on.
Front and rear fog lamps (ring B)

 Turn ring B forwards to switch on
and backwards to switch off. The
position is confi rmed by the light
on the instrument panel.
Front fog lamps (one press)
These operate with the side lights, dipped
headlamps or main beam headlamps. Rear fog lamps (two presses)
These operate with the side lights and
the front fog lamps, or with the dipped
or main beam headlamps.
Left
: downwards.

Right
: upwards
Direction indicators (fl ashers)
If you forget to return the di-
rection indicator to its normal
position, the volume of the au-
dible signal will increase, if you
are driving at a speed greater
than 45 mph (70 km/h).
Parking lights *
The side lights are lit on the side the
traffi c is on for a few hours.
With the engine switched off and with-
in 45 seconds maximum, place the in-
dicator lights stalk on the traffi c side
(for example: for parking on the right;
switching on of the lights on the left).
This is indicated by an audible signal
and lighting of the corresponding di-
rection indicator on the instrument
panel for a few seconds. If the parking lights are activated
when your vehicle switches to
economy mode, they will remain
on. However, you cannot acti-
vate the parking lights if your vehicle is
already in economy mode.
Dipped/main beam change

 Pull the stalk fully towards you.
* According to version.
Automatic switching on of
the lights.
In the case of vehicles which
are not fi tted with a lights stalk
with the "AUTO" position,
you can deactivate or activate
the automatic lighting via the multi-
function display "Personalisation -
Confi guration" menu.
Front and rear lights (ring A)

 Turn ring A to the position required

Page 83 of 211

5
75
The timed duration must also
be set, via the multifunction
display "Personalisation -
Confi guration" menu.
Automatic switching on of the lights
To switch the function on
or off, use the multifunction
display "Personalisation -
Confi guration" menu. Activation
Deactivation
When this function is activat-
ed, the indicator light on the
instrument panel comes on.
When the function is deacti-
vated, the indicator light on the
instrument panel comes on.

Cancellation:

 fl ash the headlamps,

 get out of the vehicle and lock it.
Manual "follow-me-home" lighting
If the automatic switching on of the lights
is not activated, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.

Activation:

 switch off the engine,

 fl ash the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 fl ash the headlamps again,

 get out of the vehicle and lock it.
Automatic "follow-me-home"
lighting
When you leave your vehicle with
the
automatic switching on of the lights
activated , the side lights and dipped
headlamps remain on for the duration se-
lected when the ignition is switched off.
To activate or deactivate this func-
tion, pass via the multifunction display

"Personalisation - Configuration"
menu.
In foggy weather, the bright-
ness sensor can detect suffi -
cient light. As a consequence,
the lights will not come on au-
tomatically.
This function is active when the vehi-
cle is supplied to the customer.
If the brightness sensor does not
function correctly , if the system is
activated, the dipped headlamps and
the side lights come on.
Contact a PEUGEOT dealer to have
the system checked.
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
The instruments and controls
(instrument panel, multifunc-
tion display, air conditioning
control panel, ...) are only lit
on switching to the automatic switch-
ing on of the lights mode or when the
lights are switched on manually. This warning light comes on
on the instrument panel.
* According to country.
This function is available di-
rectly at the lights stalk on
certain versions depending on
the type of lights stalk.
The side lights and dipped beam head-
lamps switch on automatically if the light
is poor, or during operation of the wind-
screen wipers. They switch off as soon
as the light becomes bright enough or
the windscreen wipers stop.

Page 84 of 211

5
75
The timed duration must also
be set, via the multifunction
display "Personalisation -
Confi guration" menu.
Automatic switching on of the lights
To switch the function on
or off, use the multifunction
display "Personalisation -
Confi guration" menu. Activation
Deactivation
When this function is activat-
ed, the indicator light on the
instrument panel comes on.
When the function is deacti-
vated, the indicator light on the
instrument panel comes on.

Cancellation:

 fl ash the headlamps,

 get out of the vehicle and lock it.
Manual "follow-me-home" lighting
If the automatic switching on of the lights
is not activated, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.

Activation:

 switch off the engine,

 fl ash the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 fl ash the headlamps again,

 get out of the vehicle and lock it.
Automatic "follow-me-home"
lighting
When you leave your vehicle with
the
automatic switching on of the lights
activated , the side lights and dipped
headlamps remain on for the duration se-
lected when the ignition is switched off.
To activate or deactivate this func-
tion, pass via the multifunction display

"Personalisation - Configuration"
menu.
In foggy weather, the bright-
ness sensor can detect suffi -
cient light. As a consequence,
the lights will not come on au-
tomatically.
This function is active when the vehi-
cle is supplied to the customer.
If the brightness sensor does not
function correctly , if the system is
activated, the dipped headlamps and
the side lights come on.
Contact a PEUGEOT dealer to have
the system checked.
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
The instruments and controls
(instrument panel, multifunc-
tion display, air conditioning
control panel, ...) are only lit
on switching to the automatic switch-
ing on of the lights mode or when the
lights are switched on manually. This warning light comes on
on the instrument panel.
* According to country.
This function is available di-
rectly at the lights stalk on
certain versions depending on
the type of lights stalk.
The side lights and dipped beam head-
lamps switch on automatically if the light
is poor, or during operation of the wind-
screen wipers. They switch off as soon
as the light becomes bright enough or
the windscreen wipers stop.

Page 124 of 211

1010
112
CHANGING A FRONT BULB
Handle the bulbs with a dry cloth.
2 - Side lights : W 5 W (COOL BLUE
®).

 Turn the access cap a quarter turn,
remove the bulb and change it.

3 - Direction indicators : PY 21 W
(DIADEM
®).

 Turn the access cap a quarter turn,

 Remove the bulb holder.

 Change the bulb.

4 - Front fog lamps
: H11 - 55 W.
The headlamps are fi tted with polycar-
bonate glass with a protective coating. Do
not clean them with a dry or abrasive cloth,
nor with a detergent or solvent product.
Ensure that the liquid used to fi ll the
wash-wipe and headlamp wash reser-
voir is of good quality. Integrated direction indicator side
repeaters

 Push the repeater forwards or
backwards and release it.

 Unclip the repeater and change it.
Repeaters can be obtained from a
PEUGEOT dealer.
Front lights
In the engine compartment, remove
the cover secured by one or two but-
terfl y screws, a plastic retainer clip and
two quarter turn screws.

1 - Dipped beam and main beam head-
lamps : D1S-35W xenon bulb.

WARNING: RISK OF
ELECTROCUTION Coloured bulbs (side lights
and direction indicators) must
be replaced with bulbs of iden-
tical specifi cation and colour.
In certain climatic conditions
(low temperature, humidity),
condensation on the inside
surface of the headlamp glass
is normal; it disappears a few minutes
after the lights are switched on.
Xenon bulbs must be replaced by a
PEUGEOT dealer.

Page 125 of 211

1010
113
CHANGING A REAR BULB

1. Direction indicators: W 16 W.

2. Fog lamps: P21 W.

3. Reversing lights: P21 W.

4. Brake lights/side lights: P21/5 W.
 Fold down the panel to gain access
to the light.

 Unscrew the 2 light fi xing nuts inside
the boot.

 Disconnect the connector.

 Pull the light towards the outside.

 Unscrew the bulb holder sleeve a
quarter of a turn.

 Unscrew the faulty bulb and
change it.

 Screw in the bulb holder sleeve a
quarter of a turn.

 Put the light back in place from the
outside.

 Reconnect the connector.

 Screw on the 2 light fi xing nuts in-
side the boot. When refi tting, en-
sure that the light is positioned and
fi xed correctly.
Number plate lights: W 5 W.

 Remove the transparent cover us-
ing a screwdriver.

 Change the faulty bulb.

Third brake light: diodes.
Contact a PEUGEOT dealer for replacement.