trip computer Peugeot 407 C 2008 Owner's Manual

Page 5 of 211


1. Audio equipment steering wheel
control.

2. Steering lock and ignition.

3. Wipers/wash-wipe and trip
computer controls.

4. Instrument panel.

5. Driver's air bag.
Horn.

6. Gear lever.

7. Driver's seat electric controls.

8. Driver's heated seat control.

9. Driver's footwell air outlet.

10. Storage compartment.

11. Fuel fi ller fl ap opening button.

12. Adjustable and closing side vent.

13. Speakers (tweeters).

14. Disarming of the passenger airbag *

Page 17 of 211

1
20

1. Coolant temperature indicator dial.

2. Lights on indicators:
dipped headlamps.
main beam headlamps.
front fog lamps.
rear fog lamps.

3. Rev counter dial.

4. Warning lights:
seat belts not fastened in the front.
fuel level.
left direction indicator.

5. Fuel level indicator dial.
5 - DIAL PETROL-DIESEL MANUAL AND AUTOMATIC GEARBOX INSTRUMENT PANELS

10. CHECK and trip recorder zero re-
set and service display button.

11. Instrument panel display:
Total distance recorder.
Trip recorder.
Cruise control/ speed limiter refer- ence value.
Service indicator.
Direction advice (navigation)
CHECK (vehicle autotest).
Trip computer information displays.
Warning and status displays.

6. Warning lights:
handbrake applied or brake fl uid level or electronic brake force dis-
tribution fault.
right direction indicator.

7. Speedometer dial.

8. Warning lights:
emission control system.
anti-lock braking system (ABS).
passenger air bag disarmed.
pre-heat (Diesel engine starting).

9. Engine oil temperature indicator
dial. Automatic gearbox lever position
indicator.

12. Instrument panel lighting rheostat.

Page 30 of 211

1
31
TRIP COMPUTER

or
TRIP (Route): access
to the trip computer dis-
plays.
Zero reset
When the required route is displayed,
press the control for more than two
seconds. - the route
"1" tab with:


Page 31 of 211

1
32
Press the "MENU" button to gain ac-
cess to the general menu.
Select the "Trip computer" or

"Vehicle diagnostics" application us-
ing the navigator, then confi rm or press
the "MODE" button until you reach the
trip computer screen, then confi rm us-
ing "OK" .
The "Trip computer" or "Vehicle diag-
nostics" menu offers various options:
- Warnings log,
- Status of the functions,
- Inputting of the distance to be trav- elled.
Warnings log
This summarises the active warning
messages, displaying them on the
multifunction display in succession.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Distance remaining
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled value.
Display on the instrument panel screen
All of the various items of trip computer
information also appear on the instru-
ment panel screen at the same time.
Distance remaining to be travelled (km or miles)
Average speed (km/h or mph)
Average consumption (l/100 or km/l or mpg)
Distance travelled (km or miles)
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
This is the distance remaining to the
destination, either calculated at any
time by the navigation if guidance is
activated or entered by the user, mi-
nus the distance covered since the
distance was entered.
If digits are missing, dashes are dis-
played in their place.
This is the average fuel consumption
since the computer was last set to zero.
This indicates the distance travelled
since the computer was last set to zero.
Access via the general menu
"TRIP" (Route) menu

Page 32 of 211

2
33
COLOUR SCREEN C
This displays the following informa-
tion, via the WIP Sound audio system
control pad:
- the time,
- the date,
- the exterior temperature (the value displayed fl ashes if there is a risk
of ice),
- the accesses check,
- the warning messages,
- the audio functions,
- the trip computer information,
-
the personalisation and confi guration
displays,
- the air conditioning parameters,
-
the front and rear parking assistance
display,
- the hands-free kit displays. Management of the displays
General menu
Press the
"MENU" button to gain ac-
cess to the general menu and select
one of the following functions:
- "Audio functions",
- "Trip computer",
- "Personalisation-Confi guration",
- "Air conditioning",
- "Telephone". "Personalisation-Confi guration"
menu
This provides access to successive
confi rmation windows.
Defi ning the vehicle parameters
This enables you to activate or de-
activate certain driving and comfort
elements:
-
"Automatic switching on of the lights", - "Follow-me-home lighting" and
"Duration",
- "Remote control action",
- "Permanent locking of the boot",
- "Directional headlamps".
Example: "Automatic switching on of
the lights"
The
"AUDIO" , "TRIP" , "CLIM" and

"TEL" buttons on the RD4 audio
equipment control pad permit display-
ing in the main window.
Example: "TRIP"
Example: "Audio functions"

Page 34 of 211

2
35
16/9 COLOUR SCREEN DT
This displays the following information,
via the WIP Com audio and telematics
system control panel:
- the time,
- the date,
- the outside temperature (the value displayed fl ashes if there is a risk
of ice),
- the status of the accesses,
- the warning messages or vehicle function status messages,
displayed temporarily,
- the audio functions,
- the telematic systems display (telephone, services, ...),
- the trip computer information,
- the personalisation and confi guration displays,
- the air conditioning parameters,
- the front and rear parking assistance display,
- the satellite navigation system information. General menu
Press the
"MENU" button to access
the general menu and select one of
the following functions:
- "Navigation - guidance",
- "Map",
- "Traffi c information",
- "Audio functions",
- "Telematics",
- "Confi guration",
- "Video",
- "Vehicle diagnostics",
- "Air conditioning". "Confi guration" menu
This provides access to the following
functions:
- "Display confi guration",
- "Sound",
- "Select language",
- "Defi ne the vehicle parameters".

Page 166 of 211

22
11
153
Press the end of the lights stalk to start thtart the voice recognition. Say the words one by one and wait for the for the audible confi rmation signal between each word. confi rmation signal between each word. The list which follows is exhaustive.
DISPLAYING THE LIST AND USING THEM
To display the list of available voice commcommands, press the end of the lights stalk to start the voice voice recognition, then say HELP or WHAT CAN I SAY.
For the same operation, press and hold the MENU button and select the function VOICE COMMANDS LIST.
VOICE COMMANDS LIST
VOICE COMMANDS LEVEL 1 display
CD changer
guide totraffi c info
CD player/jukebox
navigation
radio
LEVEL 2 audioguidancenavigationtrip computertelephone
descriptiondisplayreadrandom playlisttrack numberprevious/previous/next trackdirectory (MP3 CD)
scanstop/resumedirectoryshow
zoom out/inautostorelistmemoryprevious/next
LEVEL 3
1 ... 20
1 ... 20
previous/nextrepeat
destinationdescriptionvehicle
1 ... 6
disk numberprevious/next discrandom playlisttrack numberprevious/next trackrepeatscan
SMS/message
telephone
displayreadvoice mailbox last numbervoice message servicedirectorydescription
calldescription

Page 176 of 211

02
161
GENERAL MENU
AUDIO FUNCTION: radio, CD, options.
TRIP COMPUTER: distance entering, warnings, status of functions.
TELEPHONE: hands-free kit, matching, management of a communication.
PERSONALISATION-CONFIGURATION: vehicle parameters, display, languages.
> COLOUR DISPLAY C
> MONOCHROME DISPLAY C
AIR CONDITIONING: on/off and dual zone control (according to equipment).
For a detailed global view of the menus available, refer to the "Display fl ow charts" part of this WIP Sound section.

Page 183 of 211

123
23
1
2
3
4
3
4
3
4
2
3
4
3
4
3
3
3
2
1
2
2
1
2
3
2
3
4
4
4
3
4
4
4
4
4
07
168
AUDIO FUNCTIONS
date and time adjustment
day/month/year adjustment
hour/minute adjustment
choice of 12 h/24 h mode
DISPLAY FLOW CHART display C DISPLAY FLOW CHART display C
TRIP COMPUTER
MAIN FUNCTION C
* The parameters vary according to vehicle (refer to the "Multifunction displays" section).
CHOICE A choice A1 choice A2 CHOICE B...
track random play (RDM)
activate/deactivate
FM BAND PREFERENCES
alternative frequencies (RDS)
activate/deactivate
regional mode (REG)
activate/deactivate
radio-text information (RDTXT)
activate/deactivate
AUDIO CD PREFERENCES
CD changer repeat (RPT)
activate/deactivate
ENTER DISTANCE TO DESTINATION
distance: x km
WARNING LOG
diagnostics
video brightness adjustment
normal video
inverse video
brightness (- +) adjustment
STATUS OF FUNCTIONS *
functions activated or deactivated
PERSONALISATION-CONFIGURATION
DEFINE THE VEHICLE PARAMETERS *
DISPLAY CONFIGURATION
choice of units
l/100 km - mpg - km/l
°Celsius/°Fahrenheit

Page 187 of 211

3
02 GENERAL OPERATION
For a detailed global view of the menus available, refer to the "Display fl ow charts" section of this handbook.
Press the MODE button several times in succession to gain access to the following menus:
For maintenance of the display, the use of a soft, non-abrasive cloth (spectacles cloth) is recommended, without any addi tional product.
RADIO / MUSIC MEDIA PLAYERS
PHONE (If a conversation is in progress)
TRIP COMPUTER
FULL SCREEN MAP
NAVIGATION (If navigation is in progress)
SETUP: system language, date and time, display, vehicle parameters, units and system parameters
TRAFFIC: TMC information and messages

Page:   1-10 11-20 next >