buttons PEUGEOT 407 C 2010 Owners Manual

4. Mirror adjustment.

A. Door mirror selection, adjustment
and folding control.

1. Selection of the driver’s side mirror.

2. Selection of the passenger’s side
mirror.

3. Folding the mirrors.
Rear view mirror adjustment

 49

 48
Door mirror adjustment Storing driving positions
This memorisation stores the electric
adjustment of the driver's seat, steering
wheel and door mirrors.
You can store two driving positions using

buttons M/1 and M/2 .

 55
To provide optimum vision when parking, the rear view mirror
glass automatically lightens
when reverse is engaged.

3
Storing driving positions
The electrical adjustments of the
driver's seat, steering wheel and door
mirrors are stored.
Two driving positions can be stored
using buttons M/
1 and
M/2 . An audible signal confi rms that a posi-
tion has been stored.
Storing a new position cancels the
previous one.
Recalling a stored driving position
During access to the rear seats,
the storing and recalling of the
driving positions are deactivated.
Vehicle moving

 Keep button 1 or 2 pressed down
until the audible signal indicates
that setting of the corresponding
memorised position is complete.
REAR HEAD RESTRAINTS
The rear head restraints have a high
position for use and a low position for
stowing.
They can also be removed.
To remove them, pull upwards fully
and press the lug.
Never drive with the head
restraints removed; they must
be in place and adjusted
correctly.
Storing using the controls on the
driver's door
To store a driving position:

 Switch on the ignition,

 Adjust your seat, steering wheel
and mirrors,

 Press button M , then button 1 "fi rst
driving position" or button 2 "second
driving position" within four seconds. Ignition on, vehicle stationary

 Briefl y press button 1 or 2 to recall
the corresponding stored position.
The end of the setting is indicated
by an audible signal.
After recalling a stored position a few
times in succession, the function will be
cancelled until the engine is started.