Peugeot 407 C Dag 2006.5 Owner's Guide

2
31
16/9 COLOUR SCREEN DT
This displays the following informa-tion, via the RT4 audio/telephone con-trol panel:
- the time,- the date,- the outside temperature (the value displayed flashes if there is a risk of ice),- the status of the accesses,- the warning messages or vehicle function status messages, displayed temporarily,- the audio source displays,- the telematic system displays (tele-phone, services, ...),- the trip computer displays,- the personalisation and configura-tion displays,- the air conditioning displays,- the front and rear parking assistance display,- the satellite navigation system displays.
General menu
Press the "MENU" button to access the general menu and select one of the following functions:
- "Navigation - guidance",- "Map",- "Traffic information",- "Audio functions",- "Telematics",- "Configuration",- "Video",- "Vehicle diagnostics",- "Air conditioning".
"Configuration" menu
This provides access to the following functions:
- "Display configuration",- "Sound",- "Select language",- "Define vehicle parameters".

2
32
Display configuration
- "Choose colour",- "Adjust brightness",- "Adjust date and time",- "Select units".
"Video" menuDefine the vehicle parameters
This enables you to activate or de-activate certain driving and comfort functions:
- "Automatic switching on of the headlamps",- "Follow-me-home lighting" and "Duration",- "Remote control action",- "Directional headlamps",- "Permanent locking of the boot".
Example: "Automatic switching on of the headlamps".
You can connect video equipment (camcorder, digital camera, DVD play-er, ...) to the three video sockets, lo-cated in the glove box.
Videos can only be displayed when stationary.
Select the "Video" menu from the general menu:
- "Activate video mode" to activate/de-activate the video,- "Video parameters" to set the display format, the brightness, the contrast and the colours.Pressing the "DARK" button discon-nects the display from the video.
Successive presses on the "SOURCE"button permit the selection of an audio source other than that of the video.For safety reasons, configura-tion of the multifunction dis-plays by the driver must take place when stationary.

2
32
Display configuration
- "Choose colour",- "Adjust brightness",- "Adjust date and time",- "Select units".
"Video" menuDefine the vehicle parameters
This enables you to activate or de-activate certain driving and comfort functions:
- "Automatic switching on of the headlamps",- "Follow-me-home lighting" and "Duration",- "Remote control action",- "Directional headlamps",- "Permanent locking of the boot".
Example: "Automatic switching on of the headlamps".
You can connect video equipment (camcorder, digital camera, DVD play-er, ...) to the three video sockets, lo-cated in the glove box.
Videos can only be displayed when stationary.
Select the "Video" menu from the general menu:
- "Activate video mode" to activate/de-activate the video,- "Video parameters" to set the display format, the brightness, the contrast and the colours.Pressing the "DARK" button discon-nects the display from the video.
Successive presses on the "SOURCE"button permit the selection of an audio source other than that of the video.For safety reasons, configura-tion of the multifunction dis-plays by the driver must take place when stationary.

3
34
For even air distribution, take care not to obstruct the exterior air intake grille located at the bottom of the wind-screen, the vents, the air outlets under the front seats and the air extractor lo-cated behind the flaps in the boot.
In certain cases of particularly arduous use (towing the maximum load on a steep gradient in hot weather), cutting off the air conditioning permits recov-ery of the engine power and therefore improvement of the towing capacity.
Close the windows to benefit fromthe full effectiveness of the air condi-tioning.
Ensure that the passenger compart-ment filter is in good condition. Have the filter elements replaced periodical-ly. If you drive in a dusty environment, replace it twice as often.
The air conditioning system does not contain chlorine and is not harmful to the ozone layer.
Operate the air conditioning system for 5 to 10 minutes, once or twice a month, to keep it in perfect working order.
The water formed by the air conditioning condensation is discharged via an open-ing provided for this purpose. Therefore, a puddle of water may form underneath the vehicle when stationary.
If the system does not produce cold air, do not use it and contact your PEUGEOT dealer.
1. Centre panel vents.
2. Temperature and humiditysensor.
3. Adjustment of the glovebox air flow (see section"Interior layout").
4. Air outlet to passengerfootwells.
5. Two ventilation vents at therear at the base of the centre console betweenthe passengers.
6. Side vents.
7. Front windows de-icingor demisting vents.
8. Windscreen de-icingor demisting vents.
9. Sunshine sensor.
10. Air diffuser grille.
AUTOMATIC REGULATION OF
THE AIR CONDITIONING
Air diffuser
The air diffuser grille, located at the top of the centre console, significantly improves distribution and flows and prevents air currents, while maintain-ing an optimum temperature inside the passenger compartment.
Advice on operation
To obtain even ventilation, avoid closing the air diffuser grille 10.
In hot weather, in order to obtain in-tense ventilation, you can close the air diffuser grille 10 and use vents 1 and 6 only.
If, when the vehicle has been parked in the sun for a long time, the interior temperature remains very high, do not hesitate to ventilate the passenger compartment for a few minutes.
Use of the automatic regulation of the air conditioning is recommended. It per-mits automatic and optimised control of all of the following functions: air flow, passenger compartment temperature and air distribution, by means of various sensors (exterior temperature, interior temperature, sunshine), so preventing the need for you to change your refer-ence settings other than the value dis-played. In addition, a humidity sensor anticipates the formation of condensa-tion in the vehicle during its use.
Do not cover the temperature and humid-ity sensor 2 and the sunshine sensor 9.
They are required for regulation of the air conditioning.

3
35

3
36
AUTOMATIC AIR
CONDITIONING (DUAL ZONE)
Dual zone: this is the differentiated regulation of the temperature and air distribution on the driver’s side and the front passenger side.
The driver and his front passenger can each adjust the temperature and the distribution of the air to suit their re-quirements.
The symbols and messages associ-ated with the automatic air conditioning controls appear on the multifunction display.
Control by the Auto programme
Automatic programme - driver and passenger comfort (1)
Press the "AUTO" button. The indica-tor light comes on. The "AUTO" sym-bol is displayed on the multifunction display.
Depending on the level of comfort se-lected, the system controls the air dis-tribution, flow, temperature and intake of air in order to guarantee comfort and an adequate circulation of air in the passenger compartment. You do not have to make any adjustments.
When the engine is cold, to prevent too great a distribution of cold air, the ventilation will only reach its optimum level progressively.

3
37
Adjustment of the temperature on the driver’s side (2)
Adjustment of the temperature on the passenger side (3)
 Press the up or down arrow to change the temperature on the driv-er’s side 2 or passenger side 3.
The value indicated on the display cor-responds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit, depending on the choice of configuration validated on the display.
A setting around the value 21 makes it possible to obtain optimum comfort. However, depending on your require-ments, a setting between 18 and 24 is usual.
Blower (4)
Air flow
 Turn dial 4 to the right to increase the air flow or to the left to reduce it.
 Turn the dial 4 to the left until the flow of air stops.
The "OFF" symbol is displayed on the multifunction display.
This action switches off the display and the indicator lights.It deactivates all of the system’s func-tions, with the exception of the rear screen demisting.The temperature-related comfort is no longer controlled (temperature, humid-ity, odour, condensation).Avoid driving for too long with the air conditioning deactivated.
Deactivation of the air conditioning
The air flow symbol (fan) is displayed on the multifunction display and is filled in in relation to the value required.
To prevent condensation and dete-rioration of the quality of the air in the passenger compartment, ensure that an adequate flow of air is maintained.
Adjustment of the driver’s air distribution (5)
Successive or continuous pressure on button 5 or 6 enables you to direct the flow of air on the driver’s side or on the passenger side independently.
The symbol (arrows) corresponding to the chosen direction 5 or 6 is displayed on the multifunction display.
 Windscreen and front side windows.
 Front and rear ventilation.
 Front and rear footwells.
AUTO Automatic distribution.
Adjustment of the passenger air distribution (6)
Control via the manual controls
It is possible to adjust one or more functions manually while leaving the other functions in automatic mode.
The "AUTO" button indicator light is switched off.
Switching to manual mode may result in discomfort (temperature, humidity, odour, condensation) and is not ad-vantageous (comfort).
To return to automatic mode, press the "AUTO" button.
On entering the vehicle, the interior temperature may be much colder (or warmer) than is comfortable. There is no need to change the tempera-ture displayed in order to obtain rap-idly the level of comfort required.
The automatic regulation of the air conditioning will use its maximum per-formance settings to correct the temper-ature difference as quickly as possible.
To reactivate the air conditioning:
 Press button 1, 2 or 3.

3
38
Front visibility control (7)
In certain cases, the comfort pro-gramme may not be sufficient to de-mist or de-ice the windows (humidity, several passengers, ice).
 In this case, select the front visibil-ity programme in order to clear the windows quickly. The indicator light comes on.
It controls the air conditioning, air flow and intake and distributes the ventila-tion to the windscreen and front side windows.
The front visibility control symbol is displayed on the multifunction display.
Once the inconvenience has been eliminated, pressing button 1 returns the system to the comfort setting.
Intake of exterior air/Recirculationof interior air (8)
This function enables you to isolate the passenger compartment from ex-terior fumes and odours.
 Press button 8 several times to set the air intake mode, the indicator light which corresponds to the mode set comes on at your preference:
- intake of exterior air. Forced exterior air intake mode.- recirculation of the air inside the pas-senger compartment. The indicator light which corresponds to the mode set comes on. Prolonged operation in interior air recirculation mode may result in the formation of condensation and deterioration of the quality of the interior air. Do not drive in air recirculation mode for prolonged periods, except in truly exceptional atmospheric conditions. The message associated with the control is displayed on the multifunc-tion display. Press button 8 to return to automat-ic control of the air intake.
For your comfort, when the igni-tion is switched off, the settings are stored until it is switched on again.
Rear screen demisting (9)
The heated rear screen operates inde-pendently of the air conditioning system.
 Press button 9, with the engine running,to demist the rear screen and the mirrors. The indicator light comes on.
Demisting is switched off automatical-ly to avoid an excessive consumption of current and in relation to the exterior temperature.
It may be stopped by pressing button 9again or when the engine is switched off.
However, the demisting resumes if the engine is switched on again within one minute.
Switch off the rear screen and exterior mirrors demisting when you consider this necessary as low current consump-tion reduces fuel consumption.

3
39
Deactivation of the air conditioning (AC-OFF)
Deactivation may result in discomfort (temperature, humidity, odour, con-densation).
You can cancel the deactivation by pressing the "AUTO" button or the blower 4 on the air conditioning control panel.
Deactivation or activation of the simultaneous Left-Right control
Activation of this function permits the transfer of the driver’s configuration to the passenger.
Deactivation of this function permits a return to the independent driver/pas-senger settings.
Any manual action on button 4 or 6 cancels the simultaneous configura-tion setting.
"AIR CON" menu
Press the "MENU" but-ton to gain access to the general menu, then confirm.
The "General menu" appears on the multifunction display.
Select the Air Conditioning icon using the navigator buttons.
The "Air Conditioning" menu ap-pears on the multifunction display as the main display.
Additional heating*
Vehicles which are fitted with an HDI engine may be equipped with auto-matic additional heating to improve your comfort.
When the engine is idling or when the vehicle is stationary, a high-pitched whistling noise and the emission of a small amount of smoke and odour is normal.
* According to country.

3
40
EXTERIOR MIRRORS
Automatic tilting of the mirrors in reverse gear*
This function allows you to see the ground (kerb, wall...) when carrying out parking manoeuvres in reverse gear.
Objects observed in the driver and passenger mirrors are, in reality, closer than they ap-pear.
This must be taken into account in or-der to judge the distance of vehicles approaching from behind correctly.
Adjustment
 Move control A to the right or to the left to select the correspond-ing mirror.
 Direct control B in all four directions to adjust.
Folding back the mirrors electrically
- from inside:With the ignition on, move the con-trol A to the central position then pull it rearwards.
- from outside: Lock the vehicle using the remote control.
This function can be deactivated. Con-tact your PEUGEOT dealer.
When the vehicle is parked, the exterior mirrors can be folded back manually.
Initial setting of the function
Engage reverse gear then select and adjust the left mirror then the right mirror.
These settings will be stored.
Tilting the mirror to the parking position
 engage reverse gear,
 move control A to the right or the left to select the corresponding mirror.
The exterior mirror corresponding to the side on which you are parking tilts downwards.
Intentional returning of the mirror to the driving position:
 deselect the mirror.
 change out of reverse gear. After a few seconds, the glass of the corre-sponding mirror resumes its normal position.
The mirror returns to the driving posi-tion automatically if the vehicle speed exceeds 6 mph (10 km/h) or if the en-gine is switched off.
* According to version.