Peugeot 407 Dag 2010 Owner's Guide

2MULTIFUNCTION SCREENS
31
Display confi guration Changing the date and time Set the parameters one by one, using
the navigator, then confi rm by clicking
on "OK" .
From the list displayed, select "Display
confi guration" , then confi rm.
From the list displayed, select "Setting
the date and time" , then confi rm.
- Brightness, to be adjusted in accor-
dance with a scale between Moon
(-) and Sun (+).
- Selection of the units of measurement.
- Setting the date and time. Your op- erational zone is displayed on the
screen. Use the navigator to move
from one selection to another.
Your new parameters are confi rmed
one by one, by pressing the naviga-
tor button. All of the parameters are
recorded if you click on OK, displayed
on the screen.
The ESCape button on the control pad
enables you to choose not to confi rm
your changes.
- Selection of the colours (on colour screen C only). From the menu, displayed on the
screen, select the icon
"Personalisa-
tion-Confi guration" using the navi-
gator, then confi rm.
For safety reasons, confi gu-
ration of the multifunction
screen by the driver must only
be done when stationary.

2MULTIFUNCTION SCREENS
32
Display
This menu allows you to set the bright-
ness of the display, the display colour
scheme and the colour of the map
(day/night and auto mode).
Vehicle
This menu permits the activation or
deactivation of certain driving and
comfort systems:
- air conditioning (A/C),
- vehicle information,
- access to the vehicle,
- driving assistance,
- lighting confi guration,
- comfort lighting.
Units
This menu permits selection of the
units: temperature (°C or °F) and fuel
consumption (km/l, l/100, miles and
mpg).
System
This menu permits restoring of the fac-
tory confi guration, display of the soft-
ware version and activation of scrolling
text. For safety reasons, confi gu-
ration of the multifunction
screen by the driver must only
be done when stationary. COLOUR SCREEN (WITH PEUGEOT CONNECT NAVIGATION) "SETUP" menu
Press the SETUP button to gain access
to the "SETUP" menu. This provides
access to the following functions:
- System language,
- Date & Time,
- Display,
- Vehicle,
- Units,
- System.
System language
This menu allows you to select
the language used by the display:
German, English, Spanish, French,
Italian, Dutch, Polish, Portuguese.
Date & Time
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the
"Audio and Telematics" section).
This displays the following information:
- time,
- date,
- ambient temperature (the value dis-
played fl ashes if there is a risk of ice),
- check of openings,
- vehicle function status messages, displayed temporarily,
- warning messages,
- audio functions,
- trip computer information,
- air conditioning settings,
- satellite navigation system information.

2MULTIFUNCTION SCREENS
33
HIGH DEFINITION COLOUR SCREEN (WITH PEUGEOT CONNECT MEDIA)
This displays the following information:
- time,
- date,
- ambient temperature (the value dis-played fl ashes if there is a risk of
ice),
- check of openings,
- vehicle function status messages, displayed temporarily,
- warning messages,
- audio functions,
- trip computer information,
- air conditioning settings,
- satellite navigation system information.
Main menu Display confi guration
Press the "MENU" button to gain ac-
cess to the main menu and select one
of the following functions: Navigation-
Guidance, Map, Traffi c Information,
Audio Functions, Telematics, Confi gu-
ration, Video, Vehicle Diagnostics and
Air Conditioning. - Choose colour,
- Adjust brightness,
- Adjust date and time,
- Choose units.
Defi ne the vehicle parameters
Permits the activation or deactivation
of certain driving and comfort ele-
ments:
- permanent locking of the boot on
the 407 Saloon,
- automatic illumination of headlamps,
- automatic "guide-me-home" lighting,
- automatic rear wiping on engaging reverse gear on the 407SW.
The "Confi guration" menu provides
access to the following functions:
- Display confi guration,
- Sound,
- Choice of language,
- Defi ne the vehicle parameters.
You can connect video equipment
(camcorder, digital camera, ...) to the
three video sockets, located in the
glove box.
Video display is only possible when
stationary.
Select the Video menu from the gen-
eral menu:
- "Activate video mode" to activate/deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the con-
trast and the colours.
Press the "ESC" or "DARK" button to
exit from video mode.
Press the "SOURCE" button several
times in succession to select an audio
source other than that of the video. VIDEO MENU (WITH PEUGEOT CONNECT MEDIA)

3COMFORT
34

3COMFORT
35
For even air distribution, take care
not to obstruct the exterior air intake
grille located at the bottom of the wind-
screen, the vents, the air outlets under
the front seats and the air extractor lo-
cated behind the fl aps in the boot.
In certain cases of particularly arduous
use (towing the maximum load on a
steep gradient in hot weather), cutting
off the air conditioning permits recov-
ery of the engine power and therefore
improvement of the towing capacity.
Close the windows to benefi t from the
full effectiveness of the air conditioning.
Ensure that the passenger compart-
ment fi lter is in good condition. Have
the fi lter elements replaced periodical-
ly. If you drive in a dusty environment,
replace it twice as often.
The air conditioning system does not
contain chlorine and is not harmful to
the ozone layer.
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month, to keep it in perfect working
order.
The water formed by the air conditioning
condensation is discharged via an open-
ing provided for this purpose. Therefore,
a puddle of water may form underneath
the vehicle when stationary. If the system does not produce cold air,
do not use it and contact a PEUGEOT
dealer.

1. Centre panel vents.

2. Adjustment of the glove box air
fl ow (see section"Interior layout").

3. Air outlet to passenger footwells.

4. Two ventilation vents at the rear at
the base of the centre console be-
tween the passengers.

5. Side vents.

6. Front windows demisting/defrosting
vents.

7.
Windscreen demisting/defrosting vents.

8. Sunshine sensor.

9. Air diffuser grille.
AUTOMATIC AIR CONDITIONING REGULATION
Use of the automatic regulation of the
air conditioning is recommended. It
permits automatic and optimised con-
trol of all of the following functions: air
fl ow, passenger compartment temper-
ature and air distribution, by means
of various sensors, so preventing the
need for you to change your refer-
ence settings other than the value dis-
played.
Air diffuser
The air diffuser grille, located at the top
of the centre console, signifi cantly im-
proves distribution and fl ows and pre-
vents air currents, while maintaining an
optimum temperature inside the pas-
senger compartment.
Do not cover the sunshine sensor
8 .
It is required for regulation of the air
conditioning.
Advice on operation
To obtain even ventilation,
avoid closing the air diffuser
grille 9 .
In hot weather, in order to obtain in-
tense ventilation, you can close the
air diffuser grille and use vents 1 and

5 only.
If, when the vehicle has been parked
in the sun for a long time, the interior
temperature remains very high, do not
hesitate to ventilate the passenger
compartment for a few minutes.

3COMFORT
36
DIGITAL AIR CONDITIONING (MONO-ZONE)

Mono-zone: this is the overall regula-
tion of the temperature, distribution and
fl ow in the passenger compartment.
Control by the Auto programme Automatic
programme -
comfort (1)

Press the "AUTO" button. The indicator
lamp comes on. The "AUTO" symbol is
displayed on the multifunction screen.
Depending on the level of comfort selected,
the system controls the air distribution, fl ow,
temperature and intake of air in order to pro-
vide comfort and an adequate circulation of
air in the passenger compartment. You do
not have to make any adjustments.

 Press the right or
left arrow to change
it.
Adjustment of the temperature (2)
To prevent too great a distri-
bution of cold air when the en-
gine is cold, the ventilation will
only reach its optimum level
progressively.
The symbols and messages associated
with the digital air conditioning controls
appear on the multifunction screen.
The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit, depending on the screen
confi guration.
A setting around the value 21 makes
it possible to obtain optimum comfort.
However, depending on your require-
ments, a setting between 18 and 24
is usual.

3COMFORT
37
Manual control
It is possible to adjust one or more
functions manually, while leaving the
other functions in automatic mode.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and is not ad-
vantageous (comfort).
To return to automatic mode, press the

"AUTO" button. Blower (3)
Air fl ow

 Turn the dial 3 to the
right to increase the
air fl ow or to the left
to reduce it.
Switching off the ventilation
 Turn the dial 3 to the
left until the fl ow of
air stops. Adjustment of air
distribution (4)
Successive or continuous pressure on
button 4 enables you to direct the fl ow
of air.
The "AUTO" button indicator lamp is
switched off.
The symbol (arrows) corresponding to
the chosen direction is displayed on
the multifunction screen.


Windscreen and front side windows.
 Front and rear ventilation.

 Front and rear footwells.
AUTO Automatic distribution.
Front visibility
control (5)
In certain cases, the comfort pro-
gramme may not be suffi cient to dem-
ist or defrost the windows (humidity,
several passengers, ice).

 In this case, select the front vis-
ibility programme in order to clear
the windows quickly. The indicator
lamp comes on.
It controls the air conditioning, air fl ow
and intake and distributes the ventila-
tion to the windscreen and front side
windows.
The front visibility control symbol is
displayed on the multifunction screen.
Once the screen is clear, press button

1 to return the system to the comfort
setting.

To reactivate the air conditioning:

 Press button 1 .
On entering the vehicle, the
interior temperature may be
much colder (or warmer) than
is comfortable. There is no
need to change the temperature dis-
played in order to obtain rapidly the
level of comfort required.
The automatic regulation of the air
conditioning settings is used to correct
the temperature difference as quickly
as possible. The
"AUTO" button indicator lamp is
switched off.
The air fl ow symbol (fan) is displayed
on the multifunction screen and is fi lled
according the value selected.
To prevent condensation and dete-
rioration of the quality of the air in the
passenger compartment, ensure that
an adequate fl ow of air is maintained.
The "OFF" symbol is displayed on the
multifunction screen.
This action switches off the display
and the indicator lamps.
It deactivates all of the system's func-
tions, with the exception of the rear
screen demisting.
The temperature-related comfort is no
longer controlled (temperature, humid-
ity, odour, condensation).
Avoid driving for too long with the air
conditioning off.

3COMFORT
38
Intake of exterior
air/Recirculation of
interior air (6)
This function enables you to isolate
the passenger compartment from ex-
terior fumes and odours.

 Press button 6 several times to
set the air intake mode, the indica-
tor lamp which corresponds to the
mode set comes on at your prefe-
rence:
- intake of exterior air. Forced ex- terior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator lamp for the mode set comes on. Prolonged opera-
tion in interior air recirculation
mode may result in the formation
of condensation and deteriora-
tion of the quality of the interior
air.
Do not drive in air recirculation mode for prolonged periods, ex-
cept in truly exceptional atmo-
spheric conditions.
The message associated with the setting is displayed on the
multifunction screen.

 Press button 6 to return to auto-
matic control of the air intake. The
two indicator lamps are switched
off.

For your comfort, when the igni-
tion is switched off, the settings are
stored until it is switched on again. Rear screen
demisting (7)
The heated rear screen operates inde-
pendently of the air conditioning system.

 Press button 7 , with the engine
running, to demist the rear screen
and the door mirrors. The indicator
lamp comes on.
Demisting is switched off automatical-
ly to prevent an excessive consump-
tion of current and depending on the
ambient temperature.
It may be stopped by pressing button 7
again or when the engine is switched
off.
However, demisting resumes if the en-
gine is switched on again within one
minute.
Switch off the rear screen and door
mirror demisting when not needed as
lowering current consumption reduces
fuel consumption.

3COMFORT
39
"AIR CON" menu Press the "MENU" but-
ton for access to the main
menu, then confi rm.
The "Main menu" appears on the
multifunction screen.
Select the Air Conditioning icon using
the navigator buttons. The
"Air Conditioning" menu ap-
pears on the multifunction screen as
the main display.
Deactivation of the air conditioning
(AC-OFF) Additional heating *
Vehicles which are fi tted with an HDI
engine may be equipped with auto-
matic additional heating to improve
your comfort.
When the engine is idling or when the
vehicle is stationary, a high-pitched
whistling noise and the emission of a
small amount of smoke and odour is
normal.
Deactivation may result in discomfort
(temperature, humidity, odour, con-
densation).
The symbol "AC OFF" is displayed on
the multifunction screen.
There is a risk that the temperature
setting value may not be reached and
you risk having condensation on the
windows.
You can cancel the deactivation by
pressing the "AUTO" button on the air
conditioning control panel.
* According to country.

3COMFORT
DIGITAL AIR CONDITIONING (DUAL-ZONE)

Dual-zone: this is the differentiated
regulation of the temperature and air
distribution on the driver's side and the
front passenger's side.
The driver and front passenger can
each adjust the temperature and the
distribution of the air to suit their re-
quirements.
Control by the Auto programme Automatic
programme - driver
and passenger
comfort (1)
Press the "AUTO" button. The indicator
lamp comes on. The "AUTO" symbol is
displayed on the multifunction screen.
Adjustment of the
temperature on the driver's
side (2)
Adjustment of the temperature
on the passenger's side (3)

 Press the up or down arrow to change
the temperature on the driver's side 2
or passenger's side 3 .
The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit, depending on the screen
confi guration.
A setting around the value 21 makes
it possible to obtain optimum comfort.
However, depending on your require-
ments, a setting between 18 and 24
is usual.
To prevent too great a distri-
bution of cold air when the en-
gine is cold, the ventilation will
only reach its optimum level
progressively.
The symbols and messages associ-
ated with the digital air conditioning
controls appear on the multifunction
screen. Depending on the level of comfort selected,
the system controls the air distribution, fl ow,
temperature and intake of air in order to pro-
vide comfort and an adequate circulation of
air in the passenger compartment. You do
not have to make any adjustments.