lock PEUGEOT 5008 2010.5 Owners Manual

6
OPENING
Remote control key

A. Unfolding/Folding the key.
Normal locking
(press once; fi xed lighting of
the direction indicators).
Deadlocking the vehicle
(press twice in succession;
fi xed lighting of the direction
indicators).
Complete or selective unlock-
ing of the vehicle
(rapid fl ashing of the direction
indicators).
or
73 When the light is poor, detected by a sen-
sor, the remote switching on of the dipped
beam headlamps and sidelamps makes
your approach to the vehicle easier.
This function can be programmed via
the confi guration menu. 90 86
Fuel tank

1. Opening the fuel fi ller fl ap.

2. Opening and hooking the fuel fi ller
cap.
The type of fuel to be used is indicated
on the inner face of the fuel fi ller fl ap.
Capacity of the tank: approximately
60 litres.
Welcome lighting
On Diesel vehicles, the fuel
fi ller neck incorporates a mis-
fuel prevention device which
prevents fi lling with petrol.
This equipment will become available
during the year.

OPENING
Boot Panoramic sunroof

1. Opening the blind.

2. Closing the blind.

1. Unlocking the vehicle.

2. Opening the boot.
84 105

9
INSTRUMENTS AND CONTROLS

1. Audio and telematics system
steering mounted control stalk.

2. Steering lock and ignition.

3. Wipers/screenwash/trip computer
control stalk.

4. Instrument panel.

5. Driver’s airbag.
Horn.

6. Gear lever.

7. Electric parking brake.

8. 12 V accessories socket.

9. Centre console.

10. Panoramic sunroof control.

11. Handbook storage compartment.

12. Manual headlamp adjustment.
Instrument panel navigator associated with the
Peugeot Connect Media.

13. Alarm button.
Parking sensors button.
Dynamic stability control button (ESP/ASR).

14. Door mirror controls.
Electric window controls.
Child lock.

15. Front door window demist/defrost
vent.

16. Windscreen demist/defrost vent.

10
INSTRUMENTS AND CONTROLS

1. Steering wheel adjustment.

2. Cruise control/speed limiter
switches.

3. Lighting and direction indicator
control stalk.

4. Central adjustable air vents.

5. Head-up display.

6. Multifunction screen.

7. Passenger’s airbag.

8. Side adjustable air vent.

9. Glove box - Audio/video sockets -
Passenger’s airbag deactivation.

10. Bonnet release.

11. 12 V accessories socket.

12. Heating/air conditioning controls.

13. Audio and telematics system.

14. Buttons:
- head-up display,
- hazard warning lamps,
- Distance alert,
- central locking.

12
SITTING COMFORTABLY
Front seats
Head restraint height and angle
Lumbar 64
Steering wheel adjustment

1. Releasing the adjustment mechanism.

2. Adjustment of height and reach.

3.
Locking the adjustment mechanism.
As a safety precaution, these operations
must only be carried out when stationary.
72
Centre console
This has a large storage area (with re-
cesses for 2 bottles, ...) for the front
passengers and, according to version,
a multimedia system for the rear pas-
sengers.
101,
104

16
MONITORING
Instrument panel

A. With the ignition on, the needle
should indicate the level of fuel re-
maining.

B. With the engine running, its associ-
ated low level warning lamp should
go off.

C. With the ignition on, the oil level in-
dicator should display "OIL OK" for
a few seconds.
If the levels are not correct, top up the
levels which are low.
24
Warning lamps

1. With the ignition on, the orange and
red warning lamps come on.

2. With the engine running, these
warning lamps should go off.
If warning lamps remain on, refer to the
page concerned.
26
Switch panels
Lighting of the indicator lamp indicates
the status of the corresponding function.

A. Parking space sensors. 162
78
160
126
123
144
124
146

B.
Interior protection alarm.

C. Visual and audible
parking sensors.

D. ESP OFF.

E. Child lock.

F. Head-up display.

G.
Hazard warning lamps.

H. Distance alert.

Lower

Central
74

I. Central locking.

17
PASSENGER SAFETY
Passenger's front airbag

1. Insert the key.

2. Select the position:
"OFF" (deactivation), with "rear fac-
ing" child seat,
"ON" (activation), with front passen-
ger or "forwards facing" child seat.

3. Remove the key keeping the switch
in the new position.
133
front airbag

A. Front and/or rear seat belts not fas-
tened/unfastened warning lamp.

B. Front left seat belt warning lamp.

C. Front right seat belt warning lamp.

D. Rear right seat belt warning lamp.

E. Rear centre seat belt warning lamp.

F. Rear left seat belt warning lamp.

G.
Passenger's front airbag deactivated
warning lamp.

H. Passenger's front airbag activated
warning lamp.
129
Child lock (locking of the rear doors)
Lighting of the indicator lamp indicates
the status of the corresponding function.
123

7 seat version (3rd row)

I.
Rear right seat belt warning
lamp.

J. Rear left seat belt warning
lamp.

18
ARRANGING YOUR SEATS
Rigid panel
Putting the seats back in place

 Raise the seat back and push it
rearwards until it locks.
From the boot

 Pull the strap B to release the seat
and push the seat back forwards
gently.
Folding the seats in the 2nd row

 Pull the strap A upwards fi rmly to re-
lease the seat and continue to pull
until the seat is fully folded.
Access to the 3rd row seats

 Close the aircraft style tables on the
2 nd row seats if they are open.

 Hold the control D up, the seat is
released and the seat base rises to
the seat back.

 Push the seat back forwards, hold-
ing the control D forwards.
68
67
68
7 SEAT VERSION

 After folding the seats, slide the
catch C .

19
ARRANGING YOUR SEATS (7 SEAT VERSION)
69,
108

 Pull the strap E and guide the seat
until the assembly locks.

 Fold the concertina boards forwards.
 Lower the head restraints and place
the concertina board in the vertical
position behind the seat.

 While pulling the strap F , push the
seat back forwards gently.

 Remove the load space screen from
its storage compartment and position
it behind the 2 nd row seats.

 Place the rigid panels of the 2 nd row
seats upright and lock them then fold
the concertina boards rearwards.

 Remove the load space cover and
store it in its housing.
Changing from 5 to 7 seats
69,
108

Vehicle parameters
This menu allows you to activate or
deactivate certain driving and comfort
equipment (according to country):
- wiper linked with reverse gear (refer to the "Visibility" section),
- selective unlocking (refer to the "Access" section),
- guide-me-home and welcome light- ing (refer to the "Visibility" section),
- interior mood lighting (refer to the "Visibility" section),
- daytime running lamps (refer to the "Visibility" section),
- directional headlamps (refer to the "Visibility" section),
- automatic or manual parking brake (refer to the "Driving" section).
Choice of units
This menu allows you to select the units:
temperature (°Celsius or °Fahrenheit)
and fuel consumption (l/100 km, mpg or
km/l).
Choice of language
This menu allows you to select the
display language: Deutsch, English,
Espanol, Français, Italiano, Nederlands,
Portugues, Türkçe * .
The main menu and its asso-
ciated functions can only be
accessed when stationary, via
buttons
1 to 4 .
A message appears on the screen,
above a certain speed threshold, in-
dicating that the main menu cannot
be displayed.
The trip computer displays can only
be accessed while driving, via buttons

2 and 3 (refer to the "Trip computer"
paragraph).
Main menu

 Press button 1 for access to the
main menu and select one of the fol-
lowing functions:
- "Vehicle parameters",
- "Choice of language",
- "Choice of units".

 Press button 2 or 3 to move in the
screen.

 Press button 1 again to confi rm the
selection.
* According to country. Indicator and warning lamps
Visual indicators informing the driver
that a system is in operation (operation
or deactivation indicator lamps) or of the
occurrence of a fault (warning lamp).
When the ignition is switched on
Certain warning lamps come on for a
few seconds when the vehicle's ignition
is switched on.
When the engine is started, these same
warning lamps should switch off.
If they remain on, before moving off,
refer to the information on the warning
lamp concerned.
Associated warnings
The switching on of certain warning lamps
may be accompanied by an audible signal
and a message on the multifunction screen.
The warning lamps may come
on continuously (fi xed) or fl ash.
Certain warning lamps may
come on in two different modes. Only
by relating the type of lighting to the
operating status of the vehicle can it
be ascertained whether the situation is
normal or whether a fault has occurred.