front Peugeot 508 2011 User Guide

2
39
i
Access
System which permits central unlocking or locking of the vehicle using the lock or from a distance. It is also used to locate and start the vehicle, as well
as providing protection against theft.
























Remote control key


Unfolding the key



)
First press this button to unfold the key.



"Keyless Entry and
Starting" system

System that allows the opening, closing
and star ting of the vehicle while keeping the
electronic key on your person. It can also be
used as a remote control.


Unlocking the vehicle
Complete unlocking



Using the key



)
Turn the key to the front of the vehicle to
unlock the vehicle.



Using the remote control



)
Press the open padlock to unlock
the vehicle.
Holding this button down opens the
windows automatically.


Using the electronic key



)
With the electronic key on your person and
in the defined zone, pass your hand behind
the door handle to unlock the vehicle, then
pull on the handle to open the door.
Your passengers can also open their doors,
as soon as the electronic key is in the
defined zone around the vehicle.


Unlocking is confirmed by rapid
flashing of the direction indicators for
approximately two seconds.
According to version, the door mirrors
unfold at the same time.

46
Access












Changing the battery of the key

Battery ref.: CR2032/3 volts.
This replacement battery is available from a
PEUGEOT dealer or a qualified workshop.
A message appears in the instrument panel
screen when replacement of the battery is
needed.


)
Unclip the cover using a small screwdriver
at the cutout.

)
Lift off the cover.

)
Remove the flat battery from its location.

)
Fit the new battery into its location
obser ving the original direction of fitment.

)
Clip the cover onto the casing.









Do not throw the remote control
batteries away, they contain metals
which are harmful to the environment.
Take them to an approved collection
point.

Reinitialisation with the
electronic key


)
Switch of the ignition.

)
Immediately press one of the remote
control buttons for a few seconds.

)
Switch on the ignition
The electronic key is fully operational again.

















Changing the battery of the
electronic key
Battery ref.: CR2032/3 volts.
This replacement battery is available from a
PEUGEOT dealer or a qualified workshop.
A message is displayed in the instrument panel
screen when replacement of the battery is
needed.


)
Unclip the cover using a pointed object at
the key ring.

)
Slide the flat battery out of its location.

)
Slide the new battery into its location
obser ving the original direction of fitment.

)
Clip the cover in place star ting at the front.

)
Reinitialise the electronic key.

50
Access
Electric windows



1.
Left hand front electric window switch.


2.
Right hand front electric window
switch.


3.
Right hand rear electric window switch.


4.
Left hand rear electric window switch.


5.
Deactivating the rear electric window
switches,

locking the rear doors

(child lock).


Manual operation

To open or close the window, press or pull the
switch gently. The window stops as soon as the
switch is released.

Automatic operation

(depending on version)

To open or close the window, press or pull
switch fully: the window opens or closes
completely when the switch is released.
Pressing the switch again stops the movement
of the window.
The electric window switches remain
operational for approximately one minute after
the key has been removed from the ignition.
Once this time has elapsed, the electric
windows will not operate. To reactivate them,
switch the ignition on again.


Safety anti-pinch

When the window rises and meets an obstacle,
it stops and immediately partially lowers again.
In the event of unwanted opening of the
window on closing, press the switch until the
window opens completely, then pull the switch
immediately until the window closes. Continue
to hold the switch for approximately one second
after the window has closed.
The safety anti-pinch function is not active
during this operation.


Deactivating the rear window
controls
For the safety of your children, press switch 5

to prevent operation of the rear windows
irrespective of their position.
The interior controls for the rear doors are also
deactivated.
When the button is pressed down, the switches
are deactivated. When the button is raised, the
switches are active.

3
61
Comfort

















Front seats


Manual adjustments


1.
Adjustments to the height and angle of
the head restraint

To raise it, pull upwards.
To lower it, hold the button in and press on
the head restraint (pushing to go past the
stiff point of the button).

2.
Adjustment of the backrest angle

Operate the control lever and adjust the
position of the backrest to the front or to the
rear.

3.
Adjustment of the seat height

Raise or lower the control lever the number
of times required to obtain the desired
position.

4.
Adjustment of the lumbar suppor t

This system allows the height and depth of
the lumbar suppor t to be adjusted separately.


)
For wards or backwards to increase or
decrease the lumbar suppor t.

)
Upwards or downwards to raise or lower
the lumbar contact zone.

5.
Forwards-backwards adjustment of the
seat position

Lift the control bar and slide the seat
for wards or backwards.




6. Adjusting the cushion

Pull the handle to adjust the length of the
cushion.

62
i
Comfort








Electric adjustments


Switch on the ignition or star t the engine if the vehicle has gone into economy mode.

1.
Adjustment of the seat cushion angle
and height, and forwards-backwards
adjustment



)
Raise or lower the front of the control to
adjust the seat cushion angle.

)
Raise or lower the rear of the control to
raise or lower the seat.

)
Simultaneously raise or lower the front
and rear of the control in order to raise or
lower the entire seat.

2.
Adjustment of the backrest angle


Move the control for wards or backwards to
adjust the backrest angle.

3.
Adjustment of lumbar support


This function allows you to independently
adjust the height and level of lumbar
support.
The electric functions of the driver's seat are active for about a minute after opening the
front door. They are deactivated about a minute after switching off the ignition and in
economy mode.
To reactivate them, switch on the ignition.
Move the control:


)
For wards or backwards to increase or
reduce the lumbar suppor t.

)
Upwards or downwards to raise or lower
the lumbar suppor t zone.

64
!
Comfort










Head restraint height and angle
adjustment


)
To lower the head restraint, press the lug A

and, going beyond the stiff point, guide the
head restraint downwards, then release the
button at the desired position.

)
To raise the head restraint, guide it
upwards to the desired position.

)
To adjust the angle of the head restraint, tilt
its lower part for wards or rear wards.

)
To remove the head restraint, press the two
lugs B
and pull the head restraint upwards.

)
To put the head restraint back in place, engage
the head restraint stems in the openings
keeping them in line with the seat back. Check
that it has engaged by pulling it upwards.

The head restraint is fitted with a
locking mechanism which prevents it
from lowering; this is a safety device in
case of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.

Never drive with the head restraints
removed; they must be in place and
adjusted correctly.












Heated seats control

With the engine running, the front seats can be
heated separately.


)
Use the adjustment dial, placed on the
centre console, to switch on and select the
level of heating required:
0:

Off.

1

: Low.

2

: Medium.

3

: High.

3
67
Comfort

Folding the seat from the
rear
Check that no object, either on or underneath
the seat, could hinder its movement.

Returning the seat back to its original position



)
Put the seat back in the upright position
and secure it, the seat cushion also returns
to its original position,

)
check that the red indicator, located at the
control 1
, is no longer visible,

)
refit the head restraints or put them back
in place.

)
Move the corresponding front seat
forwards if necessary,

)
check that the seat belt is positioned
correctly on the side of the seat back,

)
place the head restraints in the low position
or remove them if necessary,
)
pull the control 1
for wards to release the
seat backrest 2
then fold it for wards.
When returning the rear seat back to its original
position, take care not to trap the seat belts
and ensure that their buckles are positioned
correctly.

3
71
Comfort

















Interior fi ttings



1.
Cooled glove box

It has a ventilation nozzle which can be
closed using a thumb wheel. It delivers
cooled air.

2.
Storage
(according to version)


3.
Retractable cup holder

Press the cover to open the cup holder .

4.
Removable ashtray

Press the lid to open the ashtray.
To empty it, pull it out by pulling it upwards.

5.
Coin holder


6.
Storage with sliding cover


7.
Front armrest


8.
1
2 V accessor y socket
(120 W )

Observe the maximum power rating to
avoid damaging your accessory .

9.
Peugeot Connect USB

3
73
i
Comfort











Peugeot Connect USB


This connection box, consisting of a JACK
auxiliary socket and a USB port, is located in
the front armrest (under the cover).
It permits the connection of por table device,
such as a digital audio player of the iPod
® type
or a USB memory stick.
It reads the audio file formats (MP3, OGG,
WMA, WAV, ...) which are transmitted to your
audio equipment and played via the vehicle's
speakers.
You can manage these files using the steering
mounted controls or the audio system control
panel and display them in the instrument panel
screen.
When the USB por t is used, the por table device
charges automatically.

For more information on the use of
this system, refer to the "Audio and
Telematics" section.










Ski flap

Device for storing and transpor ting long
objects.

Opening



)
Lower the armrest.

)
Press the flap opening control.

)
Lower the flap.

)
Load the objects from inside the boot.

78
i
Comfort





High load retaining net (SW)


Hooked onto the special upper and lower
fixings, this allows the use of the entire loading
volume up to the roof:


- behind the front seats (row 1) when the rear
seats are folded.

- behind the rear seats (row 2).


Never reposition the rear seats if the
net's roller is attached to the backs of
the folded seats.


)
position the net's roller above the two rails
(located on the back of the folded rear
seats),

)
the two grooves A
must be placed above
the two rails B
. Slide the two rails B
in the
grooves A
and push the roller (lengthwise)
from right to left to secure it,

)
check that the net is hooked and tightened
correctly,
)
fold the rear seats,

)
unroll the high load retaining net without
stretching it,

)
position one of the ends of the net's metal
bar in the corresponding upper fixing 1
,

)
pull the net's metal bar to position the other
end in the other upper fixing 1
.



Row 1