heating Peugeot 508 2011 Owner's Manual

.
Contents
Instrument panel 20
Indicator and warning lamps 21
Gauges and indicators 31
Tr i p c o m p u t e r 3 6
Instruments and controlsFamiliarisation
Remote control key 39
Alarm 48
Electric windows 50
Boot 52
Motorised tailgate (SW) 53
Panoramic sunroof (SW) 56
Fuel tank 58
Diesel misfuel prevention 59
Access
Front seats 61
Rear seats 66
Mirrors 68
Steering wheel adjustment 70
Interior fi ttings 71
Boot fi ttings (Saloon) 74
Boot fi ttings (SW) 75
Heating and Ventilation 80
Manual air conditioning 82
Dual-zone digital air conditioning 84
Quad-zone digital air conditioning 87
Rear screen demist - defrost 92
Programmable Heating/ Ventilation 93
Comfort
Star ting-switching off the engine 94
Electric parking brake 96
Manual parking brake 103
Manual gearbox 104
Gear shift indicator 105
Automatic gearbox 106
6 -speed electronic gear control gearbox 110
Stop & Start 114
Hill start assist 117
Head-up display 118
Speed limiter 121
Cruise control 123
Parking sensors 125
Parking space sensors 127
Driving
Lighting controls 129
Automatic illumination of headlamps 134
Headlamp adjustment 137
Directional lighting 138
Wiper controls 140
Automatic rain sensitive wipers 142
Cour tesy lamps 144
Interior mood lighting 145
Visibility

8
Familiarisation
Lighting of the indicator lamp indicates the state
of the corresponding function.

Switch panels


Opening the boot.

Opening the fuel filler flap.
52, 53


Massage.

65



48


Alarm.
Programmable heating warning lamp.

58


93


Electric parking brake.

96



Star ting/stopping using the electronic
key.

94



Deactivation of Stop & Start.

115



Head-up display (on/off, settings).

118



Deactivation of parking sensors.

126



Parking space sensor.

127


Electric child lock.

15 6


Deactivation of the ESP/ASR system.

160



Adaptive lighting.

135

10
Familiarisation

9.
Fusebox.

10.
Front door window demisting/defrosting
vent.

11.
Windscreen demisting/defrosting vent.

12 .
Steering lock and star ting with the key.

13.
Star ting using the electronic key.

14 .
Audio equipment steering wheel controls.

15.
Wiper/screenwash/trip computer stalk.

16.
Central locking and hazard warning
buttons.

17.
Multifunction screen.

Instruments and controls



1.
Cruise control/speed limiter controls.

2.
Headlamp height adjustment.

3.
Lighting and direction indicator stalk

4.
Instrument panel.

5.
Driver's airbag.
Horn.

6.
Gear lever.

7.
12 V accessory socket
USB port /auxiliary socket.

8.
Bonnet release lever.
18.
Central adjustable air vents.

19.
Passenger's airbag.

20.
Side adjustable air vents.

21.
Glove box /Passenger's airbag deactivation.

22.
Electric parking brake.

23.
Central armrest with storage.

24.
Storage (according to version).

25.
Audio system.

26.
Heating/air conditioning controls.

.
15
Familiarisation


I would like...



Heating or manual air conditioning




Air
distribution



Air flow



Air recirculation/
Exterior air intake



Te m p e r a t u r e



Manual
A/C




HOT







COLD






DEMISTING

DEFROSTING




Vent ilat ion


Digital air conditioning:
use of the fully automatic mode by pressing the "AU TO "
button is recommended.


Advice on interior settings

1
21
!
Instruments and controls









Indicator and warning
lamps
Visual indicators informing the driver that a
system is in operation, switched off or has a
fault.

When the ignition is switched on

Cer tain warning lamps come on for a few
seconds in the instrument panel and/or
instrument panel screen when the vehicle's
ignition is switched on.
When the engine is started, these same
warning lamps should switch off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.


Associated warnings

The switching on of cer tain warning lamps may
be accompanied by an audible signal and a
message in the instrument panel screen.
The warning lamps may come on continuously
(fixed) or flash.
Cer tain warning lamps may come on in
one of two modes. Only by relating the
type of lighting to the operating status
of the vehicle can it be ascer tained
whether the situation is normal or
whether a fault has occurred.
1
2
2
2
3
3
3
2
3
3













Instrument panel screen



With the vehicle stationar y
, use the left hand
thumb wheel to move through the menus, so
as to configure the vehicle settings (driving and
comfort systems, ...).


- Rotation (other than menu): scroll through
the list of active functions available,

- Press: main menu, confirm the selection,

- Rotation (in a menu): move up or down in
the menu.




Main menu


Vehicle settings
Screen settings

Preheating/Preventilation


Driving position setting


Unlocking boot only

Driving assistance

Speeds memorised
Rear wipe in reverse gear
Automatic parking brake

Lighting

Welcome lighting
Guide-me-home headlamps
Directional headlamps

Settings





Language


Units

Fuel consumption
Te m p e r a t u r e

Colours


3
1
2
2
3
2
3
1
2

1
23
Instruments and controls


Warning/indicator lamp



State



Cause



Action/Observations







Diesel engine
pre-heating


fixed. The ignition switch is at the
2nd position (ignition on). Wait until the warning lamp goes off before star ting * .
The period of illumination of the warning lamp is
determined by the climatic conditions (up to about
thirty seconds in extreme climatic conditions).
If the engine does not star t, switch the ignition off and
then on, wait until the warning lamp goes off again,
then start the engine.





Parking brake


fixed. The parking brake is applied or not
properly released. Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.
Obser ve the safety recommendations.
For fur ther information on the parking brake, refer to
the "Driving" section.



Deactivation of
the automatic
functions of the
electric parking
brake


fixed. The "automatic application" (on
switching off the engine) and
"automatic release" functions are
deactivated or faulty. Activate the function (according to country) via the
vehicle configuration menu or contact a PEUGEOT
dealer or a qualified workshop if automatic application/
release is not possible.
The parking brake can be released manually using the
emergency release procedure.
For more information on the electric parking brake,
refer to the "Driving" section.

*
If your vehicle is fitted with Keyless Entry and Star ting, the warning lamp goes off immediately.

64
!
Comfort










Head restraint height and angle
adjustment


)
To lower the head restraint, press the lug A

and, going beyond the stiff point, guide the
head restraint downwards, then release the
button at the desired position.

)
To raise the head restraint, guide it
upwards to the desired position.

)
To adjust the angle of the head restraint, tilt
its lower part for wards or rear wards.

)
To remove the head restraint, press the two
lugs B
and pull the head restraint upwards.

)
To put the head restraint back in place, engage
the head restraint stems in the openings
keeping them in line with the seat back. Check
that it has engaged by pulling it upwards.

The head restraint is fitted with a
locking mechanism which prevents it
from lowering; this is a safety device in
case of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.

Never drive with the head restraints
removed; they must be in place and
adjusted correctly.












Heated seats control

With the engine running, the front seats can be
heated separately.


)
Use the adjustment dial, placed on the
centre console, to switch on and select the
level of heating required:
0:

Off.

1

: Low.

2

: Medium.

3

: High.

80
Comfort








Heating and Ventilation


Air intake

The air circulating in the passenger compar tment
is filtered and originates either from the outside
via the grille located at the base of the windscreen
or from the inside in air recirculation mode.


Controls

The incoming air follows various routes
depending on the controls selected by
the driver, the front passenger and rear
passengers, according to the level of
equipment.
The temperature control enables you to obtain
the level of comfor t required by mixing the air of
the various circuits.
The air distribution control enables you to
select the air vents used in the passenger
compar tment by the combined use of the
associated buttons.
The air flow control enables you to increase or
reduce the speed of the ventilation fan.
These controls are grouped together on control
panel A
on the centre console.

1.
Windscreen demisting/defrosting vents.

2.
Front side window demisting/defrosting
vents.

3.
Side adjustable air vents.

4.
Central adjustable air vents.
5.
Air outlets to the front footwells.

6.
Adjustable air vents for the rear
passengers.

7.
Air outlets to the rear footwells.



Air distribution

System which creates and maintains good
conditions of comfor t and visibility in the
vehicle's passenger compar tment.

3
85
i
i
i
Comfort

On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfor t value, there is no
need to change the value displayed in
order to obtain the comfor t required.
The system corrects the difference
in temperature automatically and as
quickly as possible.


4. Automatic visibility
programme
For maximum cooling or heating of the
passenger compar tment, it is possible
to exceed the minimum value 14 or the
maximum value 28.


)
Turn control 2
or 3
to the left until
"LO"
is displayed or to the right
until "HI"
is displayed. See "Front demisting-defrosting".

)
Press this button to equalise the
comfor t value on the passenger's
side with that on the driver's side
(mono-zone). The indicator lamp
in the button comes on.

If you wish, you can change one of settings
provided by the system. The other functions will
still be controlled automatically.


)
Pressing the "AU TO "
button returns the
system to completely automatic operation.


Manual operation


5. Mono-zone/Dual-zone

The air conditioning is designed to
operate effectively in all seasons,
with the windows closed.

6. Air conditioning On/Off

It allows you:


- in summer, to lower the temperature,

- in winter, above 3 °C, to improve demisting
performance.


7. Maximum air conditioning

If you want to temporarily refresh the
air in the passenger compar tment,
press this button and "LO"
is
displayed.
To return to the previous settings, press the
button again.







With Stop & Star t, when demisting has
been activated, the STOP mode is not
available.
Switching on



)
Press the "

A/C

"
button, the associated
green indicator lamp comes on.

The air conditioning does not operate when
the air flow control is set to off.


Switching off



)
Press the "A /C "
button again, the
associated green indicator lamp goes off.
Switching off the air conditioning may result in
some discomfor t (humidity, misting).

88
i
i
i
Comfort

5. Automatic visibility
programme
6. Mono-zone/Quad-zone

7. Air conditioning On/Off
Manual operation

If you wish, you can change one of settings
provided by the system. The other functions will
still be controlled automatically.
Press one of the Soft /Auto/Fast buttons to
return to fully automatic operation.
On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfor t value, there is no
need to change the value displayed in
order to obtain the comfor t required.
The system corrects the difference
in temperature automatically and as
quickly as possible.
See "Front demisting-defrosting". Press this button to apply the driver's
comfor t setting value to the front and
rear passengers (mono-zone). The
indicator lamp on the button comes on.
The air conditioning is designed to
operate effectively in all seasons,
with the windows closed.
It allows you:


- in summer, to lower the temperature,

- in winter, above 3 °C, to improve demisting
performance.

Switching on



)
Press the "A /C "
button, the associated
green indicator lamp comes on.

The air conditioning does not operate when
the air flow control is set to off.


Switching off



)
Press the "A /C "
button again, the
associated green indicator lamp goes off.
Switching off the air conditioning may result in
some discomfor t (humidity, misting). For maximum cooling or heating of the
passenger compar tment, it is possible
to exceed the minimum value 14 or the
maximum value 28.


)
Turn the dial 3
or 4
to the left until
"LO"
is displayed or to the right
until "HI"
is displayed.







With Stop & Star t, when demisting has
been activated, the STOP mode is not
available.