PEUGEOT 508 DAG 2010 Owners Manual

02
287
- Increase volume.
- Mute/restore sound.
- Decrease volume.
- Rotation:
Radio: access to 6 preset stations: previous/next.
Media: previous/next track.
Press: confi rmation.
- Change the audio source. Long press: mute. - Accept an incoming call. - Access to the Telephone menu if a call is in progress. - Long press: reject an incoming call or end a call in progress. - Long press: access to the "Telephone" menu if no call in progress.
- Select the type of permanent display on the screen between window and full screen modes. - Long press: black screen (DARK).
- Radio: display the list of stations.
Media: display the list of tracks.
Long press: update the list of stations received.

288
03
" Multimedia ": Media parameters, Radio parameters.
" Trip computer ": Warning log. rip computer
For a detailed global view of the menus available, refer to "Screen menu maps" in this section.
> SCREEN C " Bluetooth connection ": Connections management, Search for a device.
" Telephone ": Call, Directory management, Telephone management, Hang up.
MAIN MENU
" Personalisation-confi guration ": Defi ne the vehicle parameters, Choice of language, Display confi guration, Choice of units, Date and time adjustment.

289
1
2
1
04
AUDIO
Press SOURCE several times in succession and select radio.
Press BAND to select a waveband among: FM1, FM2, DAB (digital radio), AM.
Press LIST to display the list of stations received in alphabetical order.
A press changes to the next or previous letter (e.g. A, B, D, F, G, J, K, ...).
RADIO
Select the desired radio station and confi rm by pressing OK .
SELECTING A STATION
A long press on LIST builds or updates the list of stations; audio reception is cut momentarily.
The exterior environment (hills, buildings, tunnel, car park,
below ground...) may prevent reception, even in RDS station tracking mode. This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system.

290
1
2
04
1
1
2
RDS, if displayed, enables you to continue listening to the same station by automatic retuning to alternative frequencies. How ever, in certain conditions, coverage of an RDS station may not be assured throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
AUDIO
RDS RECEIVING TA MESSAGES
The TA (Traffi c Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffi c report is transmitted, the current audio source (Radio, CD, USB, ...) is interrupted automatically to play the TA message. Normal playback of the audio source resumes at the end of the transmission of the message.
Press TA INFO to activate or deactivate the reception of traffi c messages. When the radio is displayed on the screen, press OK to display the contextual menu.
Select " RDS " or " DAB/FM auto tracking " and confi rm to save.
" RDS " or " DAB/FM " is displayed on the screen.
DIGITAL RADIO - DAB/FM AUTO
TRACKING
DAB/FM auto tracking allows you to continue listening to the same station, by temporarily switching to the equivalent analogue station until the digital signal is stable again.
The INFO function gives priority to TA alert messages. To be active, this function needs good reception of a radio station that transmits this type of message. When a message is transmitted, the current audio source (Radio, CD, USB,...) is interrupted automatically to receive the INFO message. Normal play resumes automatically to receive the INFO message. Normal play resumes at the end of the message transmission.
Make a long press on TA INFO to display the list of categories.
DIGITAL RADIO - LISTENING TO
INFO MESSAGES
Select or deselect categories to activate or deactivate the reception of the corresponding messages.

291
1
2
04 AUDIO
Radio text is information transmitted by the radio station related to the current programme or song.
With the radio displayed on the screen, press OK to display the contextual menu.
Select " RadioText (TXT) display " and confi rm OK to save.
DISPLAY RADIO TEXT
Screen C

292
04
1
2
3
AUDIO
AUDIO CD
Insert 12 cm diameter circular compact discs only.
Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may cause faults which are no refl ection on the quality of the original player.
Without pressing the EJECT button, insert a CD in the player, play begins automatically.
To play a disc which has already been inserted, press the SOURCE button several times in succession and select " CD ".
Press one of the buttons to select a track on the CD.
PLAYING A CD
Press LIST to display the list of tracks on the CD.
Press and hold one of the buttons for fast forward or backward.

293
04 AUDIO
CD, USB
INFORMATION AND ADVICE
On a single disc, the CD player can read up to 255 MP3 fi les spread over 8 directory levels. However, it is recommended that this be ke pt to 2 levels so as to limit the time taken to access and play the CD.
During play, the folder structure is not observed.
In order to be able to play a recorded CDR or CDRW, when recording it is preferable to select standards ISO 9660 level 1.2 or Joli et.
If the disc is recorded in another format, it may not be played correctly.
It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible (4x maxi mum) for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is recommended.
Do not connect a hard disk or USB device other than audio pl ayers to the USB port. This may cause damage to your installation.
The audio system will only play fi les with extension ".mp3" or ".wma" and a compression rate that is constant or variable between 32 Kbps and 320 Kbps.
It is advisable to restrict fi le names to 20 characters without using special characters (e.g. " ?; ù) to avoid any playing or displaying problems.
The playlists accepted are types .m3u and .pls.
The number of fi les is limited to 5 000 in 500 directories on a maximum of 8 levels.

294
04
1
3
2
4
5
CD, USB
AUDIO
PLAYING A COMPILATION
Insert an MP3 compilation in the CD player or connect a memory stick to the USB port, directly or via an extension lead.
The system creates playlists (temporary memory) the creation time for which can take from a few seconds to several minutes.
The playlists are updated every time the ignition is switched off or a USB memory stick is connected.
Play starts automatically after a period which depends on the capacity of the USB memory stick.
At a fi rst connection, the order suggested is by folder. When connecting again, the order previously chosen is retained.
To play a disc or memory stick which has already been inserted, press SOURCE several times in succession and select " CD " or " USB ".
Press one of the buttons to select the next or previous track.
Press one of the buttons to select the next or previous folder in the order chosen.
Press and hold one of the buttons for fast forwards or backwards.
Press LIST to display the menu of folders in the compilation.

295
7
6
8
9
2
1
04
Select a track or a folder.
Jump a page.
Up a level in the menu.
AUDIO
USB MEMORY STICK - FILE
CLASSIFICATION
Having selected the desired classifi cation (" By folders ", " By artists ", " By genres ", " By playlists ") press OK .
Then confi rm OK to save the modifi cations.
- By folders : all folders containing audio fi les recognised on the peripheral device, in alphabetical order without following the folder structure.
- By artists : all of the artist names defi ned in the ID3 Tags, in alphabetical order.
- By genres : all of the genres defi ned in the ID3 Tags.
- By playlists : if playlists have been saved.
Make a long press on LIST or press MENU , select " Multimedia ", then " Media parameters " and fi nally " Choice of track listing " to display the different classifi cations.

296
04 AUDIO
IPOD ®
or PORTABLE PLAYER
Management of the device is via the audio system controls.
The audio fi les on a Mass Storage portable player * can be heard through the vehicle's speakers by connecting it to the USB port (cable not supplied).
If the portable player is not recognised by the USB port, connect it to the auxiliary Jack socket.
The Ipod ® must be updated regularly for the best connection. ®
The playlists are those defi ned in the Ipod ® .
The Ipod ® must be generation 5 or later. ®
* Check your player's manual.