PEUGEOT 607 2007.5 Service Manual

2
41
Coni guration of the display
- "Selection of the colours": selec-tion of the colours available for the
display.
- "Brightness and brilliance".
- "Sound": selection of the sound am- bience, setting of the voice synthe-
siser and of the voice commands.
- "International parameters":

3COMFORT

3COMFORT
43
VENTILATION

1. Windscreen de-icing or demisting
vents

2. Front window de-icing or demisting
vents

3. Side vents

4. Centre vents

5. Air outlets to the front passengers’
feet

6. Air outlets to the rear passengers’
feet Recommendations for
use and notes
If the interior temperature re-
mains very high following a prolonged
period parked in the sun, do not hesi-
tate to ventilate the passenger com-
partment for a few minutes.
To obtain uniform air distribution, take
care not to obstruct the exterior air in-
take grille located at the bottom of the
windscreen, the vents, the air outlets
under the front seats and the air ex-
tractor in the boot.

In cold weather, in order to obtain
uniform comfort, more rapid de-
misting or if the l ow of air on your
face feels uncomfortable, it is ad-
visable to close vents 3 and 4.
When washing the vehicle using high
pressure equipment, do not direct
the jet towards the exterior air intake
grille.
To obtain optimum demisting, we re-
commend that the windows are kept
clean on the inside of the vehicle.
In certain cases of particularly arduous
use (towing the maximum load on a
steep gradient when the temperature
is high), cutting off the air conditioning
permits the recovery of engine power
and, therefore, an increase in the tow-
ing capacity. For the air conditioning to be fully
effective, the windows must be
closed.
Ensure that the passenger compartment
i lter is in good condition. Have the i lter
elements replaced regularly. If you
drive in a dusty environment, replace
them twice as often.
The air conditioning system does not
contain chlorine and does not present
any danger to the ozone layer.
Operate the air conditioning for 5 to
10 minutes, once or twice a month to
keep it in perfect working order.
The water resulting from the conden-
sation of the air conditioning system
is discharged via an opening provided
for this purpose. Therefore, a puddle
of water may form underneath the ve-
hicle when stationary.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Flashing of the points separating the
setting value digits indicates a malfunc-
tion of the air conditioning. Contact your
PEUGEOT dealer.
Use of the automatic regula-
tion of the air conditioning is
recommended. It permits opti-
mised automatic control of all
of the following functions: air l ow, pas-
senger compartment temperature and
air distribution, using various sensors
(exterior temperature and sunshine),
so there is no need to change your
reference settings other than the value
displayed.

3COMFORT
44
AUTOMATIC AIR CONDITIONING (DUAL ZONE)

 Press the "AUTO"
button(s).
Note: when the visibility programme 9
or the air intake/recirculation 10 is se-
lected, the passenger's "AUTO" but-
ton is deactivated; the indicator light
of the corresponding button l ashes
temporarily.

3 - Adjustment of the driver's
temperature

4 - Adjustment of the passenger
temperature

 Press the up or down
arrow to change the temper-
ature on the driver's side 3 or
passenger side 4 .
The value indicated on the
display corresponds to a lev-
el of comfort and not to a temperature
in degrees Celsius or Fahrenheit, de-
pending on the choice of coni guration
validated on the display.
A setting around the value 21 makes it
possible to obtain optimum comfort. How-
ever, depending on your requirements, a
setting between 18 and 24 is usual.
The system is automatically set to the
value required.
Depending on the level of comfort se-
lected, the system controls the air dis-
tribution, l ow, temperature and intake
of air in order to guarantee comfort
and an adequate circulation of air in
the passenger compartment. You do
not have to make any adjustments.
The "AUTO" symbol is displayed.

Dual zone: this is the differentiated
regulation of the temperature and air
distribution on the driver's side and the
front passenger side.
The driver and his front passenger can
each adjust the temperature and the
distribution of the air to suit their re-
quirements.

1 - Driver's automatic comfort pro-
gramme

2 - Passenger automatic comfort
programme
This is the usual air conditioning sys-
tem operating mode.
When the engine is cold, to
prevent too great a distribu-
tion of cold air, the air l ow will
only reach its optimum level
progressively. On entering the vehicle, the
interior temperature may be
much colder (or warmer) than
is comfortable. There is no
need to change the temperature dis-
played in order to obtain rapidly the
level of comfort required.
The automatic regulation of the air condi-
tioning will use its maximum performance
settings to correct the temperature differ-
ence as quickly as possible.

3COMFORT
45
To limit the discomfort resulting from use of the manual controls, we recommend
the following settings:
Control via the manual controls
It is possible to adjust one or more
functions manually while leaving the
other functions in automatic mode.
The
"AUTO" button indicator light is
switched off.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and is not ad-
vantageous for comfort.
To return to automatic mode, press the

"AUTO" button.
Exterior
temperatures
Air
distribution
Positions of
the vents (3) and (4)
Comfort in the
rear seats
Blower
(minimum)

Low
Vents closed. - Increase the
blower air
l ow.
- Close the centre vents.

Average Four vents
open.

High Four vents
open. - Open the
vents.
- Increase the blower air
l ow.

3COMFORT
46

9 - Automatic visibility programme
In certain cases, the comfort
programme may not be suf-
i cient to demist or de-ice the
windows (humidity, several
passengers, ice).

 In this case, select the visibility pro-
gramme and open the side vents in
order to clear the windows quickly.
It controls the air conditioning, air
l ow and intake and distributes the
ventilation to the windscreen and
side windows.
The symbols "A/C" , "AUTO" and air
l ow (fan) are displayed.
Once the inconvenience has been elimi-
nated, pressing button 1 or 2 returns the
system to the comfort setting.

 Press the OFF button.
7 - Adjustment of the driver's air
distribution

8 - Adjustment of the passenger air
distribution
Successive presses of these buttons
enable you to direct the l ow of air on
the driver's side or on the passenger
side alternately towards:
- the windscreen and footwells,
- the footwells,
- the centre vent, side vent and foot- wells,
- the centre vent and side vent,
- the windscreen.

6 -
Deactivation of the air conditioning
(OFF)

5 - Blower and air l ow

 Press buttons "+"
and "-" respectively to
increase or decrease the
air l ow.
The air l ow symbol (fan) is
i lled in in relation to the value required.
To prevent condensation and dete-
rioration of the quality of the air in the
passenger compartment, ensure that
an adequate l ow of air is maintained.
This action switches off the display and
the indicator lights and deactivates all
of the functions of the system, with the
exception of the rear screen demisting.
The temperature-related comfort is no
longer controlled (temperature, humid-
ity, condensation).
Avoid driving for too long with the air
conditioning deactivated.

 Pressing this button again or but-
tons 5 , 7 or 8 or one of the two

"AUTO" buttons reactivates the
system with the values set before
it was switched off.

3COMFORT
47

10 - Intake of exterior air/Recirculation
of interior air
This function enables you to iso-
late the passenger compartment
from exterior fumes and odours.

11 - Rear screen and mirrors demisting

 Press this button, with the
engine running, to demist
the rear screen and the
exterior mirrors.
Demisting is switched off au-
tomatically to avoid an excessive con-
sumption of current and in relation to
the exterior temperature.
It may be stopped by pressing this
button again or when the engine is
switched off.
However, the demisting resumes if the
engine is switched on again within one
minute.
Switch off the rear screen and exterior
mirrors demisting when you consider
this necessary as low current con-
sumption reduces fuel consumption.
12 - Air conditioning On/Off (A/C)
The deactivation of this func-
tion may result in tempera-
ture, humidity, odour and
smoke discomfort.

 Press this button to switch off the
air conditioning.
The symbol "A/C" is switched off.

 Press this button again to return to
automatic operation of the air con-
ditioning.
The symbol "A/C" is displayed.

 Press this button to set the air
intake mode, the indicator light
comes on in recirculation mode.
Prolonged operation in interior air
recirculation mode may result in
the formation of condensation and
deterioration of the quality of the
interior air.
Do not drive in air recirculation mode for prolonged periods, ex-
cept in truly exceptional atmos-
pheric conditions.
The message associated with the control is displayed on the multi-
function display.

 Press this button again to return to
automatic control of the air intake.

For your comfort, when the igni-
tion is switched off, the settings are
stored until it is switched on again.

3COMFORT
48
MIRRORS
Automatically adjustable mirrors
for parking *
These allow you to see the ground
(kerb, wall...) when carrying out park-
ing manoeuvres in reverse gear. The end of the driver and pas-
senger mirrors is convex in or-
der to reduce the "blind spot"
(area at edge dei ned by a
dotted line).
As a result, objects observed in the
driver and passenger mirrors are, in re-
ality, closer than they appear.
This must be taken into account to
judge correctly the distance of vehi-
cles approaching from behind.
Tilting the mirror to the parking
position

 Turn control A to the right or to the
left.

 Engage reverse gear.
The exterior mirror corresponding to the side on which you are
parking tilts downwards.
Exterior mirrors - from outside:

 Lock the vehicle using the remote
control.

When the vehicle is parked, the exterior
mirrors can be folded back manually.
* According to version.
Adjustment

 Turn knob A to the right or to the
left to select the corresponding
mirror.

 Move knob A in all four directions
to adjust.
Folding back the mirrors
electrically
- from inside:

 With the ignition on, turn knob A
rearwards.
If the mirrors are folded back using
knob A , they will not unfold when the
vehicle is unlocked using the remote
control. You must turn knob A again. Automatic day/night exterior
mirrors
These darken automatically depend-
ing on the brightness from the rear.
They are linked with the automatic
day/night interior mirror (see para-
graph "Automatic day/night interior
mirror").
To ensure maximum visibility during
manoeuvres, the mirror clears automat-
ically when reverse gear is engaged.
Initial setting of the function

 Engage reverse gear.

 Select and adjust the left and right
mirrors in succession.
These settings will be stored when the
vehicle is locked. Returning the mirror to the normal
position

 Change out of reverse gear.
After a few seconds, the glass of the
corresponding mirror resumes its
normal position.
You can deactivate the function by return-
ing control A to the central position "

3COMFORT
Automatic day/night interior
mirror Operation

Switch on the ignition and press switch
1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mir-
ror clears automatically when
reverse gear is engaged.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
 When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .

 Adjust the height and depth of the
steering wheel.

 Lock by pulling handle A fully.

3COMFORT
Automatic day/night interior
mirror Operation

Switch on the ignition and press switch
1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mir-
ror clears automatically when
reverse gear is engaged.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
 When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .

 Adjust the height and depth of the
steering wheel.

 Lock by pulling handle A fully.