coolant temperature PEUGEOT 607 2007.5 Owners Manual

Page 21 of 187

1
24
Low brake l uid level and
electronic brake force
distribution warning light
This is linked to the warn-
ing light on the instrument
panel.
Display of this warning light, accompa-
nied by an audible signal and a message
on the multifunction display, indicates an
excessive drop in the brake l uid level
or a malfunction of the electronic brake
force distribution.
Linked with the STOP warning light.

Stop immediately in both cases.
Contact a PEUGEOT dealer.
Handbrake warning light
Linked with the warning light
on the instrument panel.
Display of this warning light,
when the vehicle is moving, accompa-
nied by an audible signal and a message
on the multifunction display, indicates
that the handbrake is applied or has not
been released correctly.
Coolant temperature
warning light

This warning light is accom-
panied by an audible signal
and a message on the multi-
function display.
It is linked to the STOP warning light.

Stop immediately.
Puncture warning light
This warning light comes on
accompanied by an audible
signal and a message on the
multifunction display locating
the punctured wheel.
It is linked to the STOP warning light.

Stop immediately.
Change the damaged wheel.
Have it repaired by a PEUGEOT dealer.
STOP warning light
This is displayed following
the
engine oil pressure ,

coolant temperature , punc-
tured wheel , low brake
l uid level or electronic brake force
distribution warning lights with which
it is linked.

Stop immediately.
Contact a PEUGEOT dealer.
Engine oil pressure
warning light
This warning light is accom-
panied by an audible signal
and a message on the multi-
function display.
It is linked to the STOP warning light.

Stop immediately if this comes on
when the engine is running.
Contact a PEUGEOT dealer as soon
as possible.
List of warning lights
Wait for the engine to cool
before topping up the level, if
necessary.

Page 27 of 187

1
30
Engine oil temperature
indicator
Coolant temperature indicator
Automatic gearbox lever
position indicator lights
"Park" indicator light
"Manual" indicator lights
These indicator lights correspond to
the six manually operated gears. "Reverse" indicator light
"Neutral" indicator light
"Drive" indicator light

Note: the letter S linked to the above
indicator lights corresponds to the
Sport operating programme. When the needle is in
zone A , the
temperature is correct.
When the needle is in zone B , the
temperature is too high.

In cases where the coolant temper-
ature warning light comes on , linked
to the STOP warning light, you must
stop immediately.

Warning: wait for the engine to cool
down before topping up the level, if
necessary.
Because the cooling system is pres-
surised, to prevent the risk of scalding,
turn the cap two notches to allow the
pressure to drop.
When the pressure has dropped, re-
move the cap and top up the level.
Contact a PEUGEOT dealer. When the needle is in
zone C , the
temperature is correct.
When the needle is in zone D , the
temperature is too high.

Reduce your speed to lower the
temperature.

Page 28 of 187

1
30
Engine oil temperature
indicator
Coolant temperature indicator
Automatic gearbox lever
position indicator lights
"Park" indicator light
"Manual" indicator lights
These indicator lights correspond to
the six manually operated gears. "Reverse" indicator light
"Neutral" indicator light
"Drive" indicator light

Note: the letter S linked to the above
indicator lights corresponds to the
Sport operating programme. When the needle is in
zone A , the
temperature is correct.
When the needle is in zone B , the
temperature is too high.

In cases where the coolant temper-
ature warning light comes on , linked
to the STOP warning light, you must
stop immediately.

Warning: wait for the engine to cool
down before topping up the level, if
necessary.
Because the cooling system is pres-
surised, to prevent the risk of scalding,
turn the cap two notches to allow the
pressure to drop.
When the pressure has dropped, re-
move the cap and top up the level.
Contact a PEUGEOT dealer. When the needle is in
zone C , the
temperature is correct.
When the needle is in zone D , the
temperature is too high.

Reduce your speed to lower the
temperature.