height PEUGEOT 607 2007.5 Owners Manual

3COMFORT
Automatic day/night interior
mirror Operation

Switch on the ignition and press switch
1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mir-
ror clears automatically when
reverse gear is engaged.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
 When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .

 Adjust the height and depth of the
steering wheel.

 Lock by pulling handle A fully.

3COMFORT
Automatic day/night interior
mirror Operation

Switch on the ignition and press switch
1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mir-
ror clears automatically when
reverse gear is engaged.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
 When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .

 Adjust the height and depth of the
steering wheel.

 Lock by pulling handle A fully.

3COMFORT
FRONT SEATS
B - Seat cushion angle adjustment C - Seat height adjustment
A - Forwards-backwards
adjustment
Push the control forwards or back-
wards to slide the seat. Tilt the front of the control upwards
or downwards to obtain the required
angle. Tilt the rear part of the control upwards
or downwards to obtain the required
height.
Electric front seats
The electric functions of the
driver’s seat are deactivated
one minute after the ignition is
switched off.
The operation of the electric
seats will be deactivated tem-
porarily if the energy economy
mode is activated.

3COMFORT
51
E - Head restraint height and angle adjustment F - Lumbar adjustment
(manual adjustment)
D - Seat back angle adjustment
Never drive with the head
restraints removed; they must
be in place and adjusted
correctly.
Tilt the control to the front or the rear to
obtain the correct angle.

Tilt the control upwards or push it down-
wards to obtain the correct height.
Raise or lower the lever to obtain the
required position.

The setting is correct when
the upper edge of the head
restraint is level with the top
of the head.
The head restraint angle can also be
adjusted manually.
To remove the head restraint, tilt the
seat back to 45° and place the head
restraint in the high position, then pull
with both hands.

7
83
SEAT BELTS
The rear seats are all i tted with a
three-point inertia reel seat belt with
force limiter.
Safety in the event of a frontal
impact has been improved by
the introduction of seat belts
with pre-tensioner and force
limiter connected to the front air bags.
Depending on the seriousness of the
impact, the pre-tensioning system in-
stantly tightens the seat belts i rmly
against the bodies of the occupants.
The pre-tensioning seat belts are
armed when the ignition is on.
The force limiter reduces the pressure
of the seat belt on the body of the oc-
cupant in the event of an accident.
With the vehicle station-
ary, when the ignition is
switched on, the warn-
ing light comes on if the
driver and/or the front
passenger has not fas-
tened his seat belt.
Front seat belts with pre-tensioner
and force limiter Front seat belt not fastened/
unfastened warning
Front seat belt height adjustment

 To lower the attachment point,
squeeze control 1 and slide it
downwards.

 To raise the attachment point, slide
control 1 upwards. Rear seat belts
To lock the seat belts

 Pull the strap, then insert the end
into the buckle.

 Check that it is fastened correctly
by pulling the strap.
To unlock the seat belts

 Press the red button on the buckle,
then remove the end. Seat belt warning light
Before moving off, the driver
must ensure that all passen-
gers have fastened their seat
belts.
When the vehicle is stationary, igni-
tion on, if the driver and/or the front
passenger has not fastened his
seat belt, the warning light on the
instrument panel comes on, then
from approximately 12 mph (20 km/h) and for
two minutes, this warning light l ashes accom-
panied by an audible signal which increases
in volume. Once these two minutes have
elapsed, the warning light remains on until the
driver or front passenger fastens his seat belt.
This warning light is always accompanied by a
message on the multifunction display.
When the vehicle is moving, the warning light
comes on if the driver or front passenger un-
fastens his seat belt.

Note: a bag or a pet placed on the front pas-
senger seat may trigger the lighting of this
warning light.