PEUGEOT 607 2007 Manual Online

5VISIBILITY
71
LIGHTS STALK
Lights off.
Side lights. Dipped/main beam head-
lamps. Dipped/main beam change

 Pull the stalk fully towards you.
Lights on
With the ignition and the automatic lights
function switched off, on opening the
driver's door a buzzer sounds to warn
you that you have left your lights on.
Front and rear fog lamps (ring B)

 Turn ring B forwards to switch on
and backwards to switch off. The
position is coni rmed by the light
on the instrument panel.
Front fog lamps (one press)
These operate with the side lights, dipped
headlamps or main beam headlamps.
Rear fog lamps (two presses)
These operate with the side lights and
the front fog lamps, or with the dipped
headlamps.
Left: downwards.

Right: upwards.
Direction indicators (l ashers)

Note: if you forget to return the
direction indicator to its normal
position, the volume of the
audible signal will increase, if
you are driving at a speed greater than
50 mph (80 km/h).
Parking lights
The side lights are lit on the side the
trafi c is on.
With the ignition off and within the next
minute, place the direction indicators
stalk on the trafi c side (for example:
for parking on the right; switching on
of the lights on the left).
This is indicated by an audible signal
and lighting of the corresponding
direction indicator on the instrument
panel.
Automatic "follow-me-home"
lighting
When you leave your vehicle with the
automatic switching on of the lights
activated , the side lights and dipped
headlamps remain on for the duration
selected when the ignition is switched
off.
To deactivate or activate this func-
tion, pass via the multifunction display

" P e r s o n a l i s a t i o n - C o n f i g u r a t i o n "
menu.
Front and rear lights (ring A)

 Turn ring A to the position required.

5VISIBILITY
72
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Coni guration"
menu. Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.

Note: in foggy weather, the brightness
sensor can detect sufi cient light. As a
consequence, the lights will not come
on automatically.
This function is active when the vehicle
is supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
Coni guration" menu.
Activation Deactivation.
When this function is activated,
the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:

 l ash the headlamps,

 get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switch-
ing on of the lights, the manual "follow-
me-home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:

 switch off the engine,

 l ash the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 l ash the headlamps again,

 get out of the vehicle and lock it.
If the brightness sensor does not
function correctly , the system activates
the function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime lights *
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
This indicator light comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunction
display, air conditioning control
panel, ...) are only lit on switching
to the automatic switching on of the lights
mode or when the lights are switched on
manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.

5VISIBILITY
72
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Coni guration"
menu. Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.

Note: in foggy weather, the brightness
sensor can detect sufi cient light. As a
consequence, the lights will not come
on automatically.
This function is active when the vehicle
is supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
Coni guration" menu.
Activation Deactivation.
When this function is activated,
the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:

 l ash the headlamps,

 get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switch-
ing on of the lights, the manual "follow-
me-home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:

 switch off the engine,

 l ash the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 l ash the headlamps again,

 get out of the vehicle and lock it.
If the brightness sensor does not
function correctly , the system activates
the function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime lights *
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
This indicator light comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunction
display, air conditioning control
panel, ...) are only lit on switching
to the automatic switching on of the lights
mode or when the lights are switched on
manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.

5VISIBILITY
73
MANUAL ADJUSTMENT OF
THE HEADLAMPS
AUTOMATIC HEADLAMP
ADJUSTMENT

In cases of malfunction , the
warning light comes on on
the instrument panel display,
accompanied by an audible
signal and a message on
the multifunction display. The system
places your headlamps to the low
position.
Do not touch the xenon bulbs. Contact
a PEUGEOT dealer.
For vehicles i tted with halogen bulbs,
depending on the load in your vehicle,
adjusting the beam of your headlamps
is recommended.

0. 1 or 2 people in the front seats.

-. 3 people.

1. 5 people.

2. 5 people + maximum authorised
loads.

3. Driver + maximum authorised
loads.

Initial setting is position 0. On vehicles with xenon bulbs:
when
stationary with the ignition on , the
system automatically corrects the
height of the beam, whatever the load
of the vehicle. The driver is then as-
sured of having optimum lighting and
not causing a nuisance to other road
users.
WINDSCREEN WIPER STALK
Windscreen wipers

2 Fast wipe (heavy rain).

1 Normal wipe (moderate rain).

I Intermittent wipe

0 Off

AUTO Automatic wipe or single
sweep.
In the Intermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In AUTO mode, the wiping speed is in
proportion to the intensity of the rain-
fall.

The wiping must be reacti-
vated if the ignition has been
switched off for more than one
minute .

5VISIBILITY
73
MANUAL ADJUSTMENT OF
THE HEADLAMPS
AUTOMATIC HEADLAMP
ADJUSTMENT

In cases of malfunction , the
warning light comes on on
the instrument panel display,
accompanied by an audible
signal and a message on
the multifunction display. The system
places your headlamps to the low
position.
Do not touch the xenon bulbs. Contact
a PEUGEOT dealer.
For vehicles i tted with halogen bulbs,
depending on the load in your vehicle,
adjusting the beam of your headlamps
is recommended.

0. 1 or 2 people in the front seats.

-. 3 people.

1. 5 people.

2. 5 people + maximum authorised
loads.

3. Driver + maximum authorised
loads.

Initial setting is position 0. On vehicles with xenon bulbs:
when
stationary with the ignition on , the
system automatically corrects the
height of the beam, whatever the load
of the vehicle. The driver is then as-
sured of having optimum lighting and
not causing a nuisance to other road
users.
WINDSCREEN WIPER STALK
Windscreen wipers

2 Fast wipe (heavy rain).

1 Normal wipe (moderate rain).

I Intermittent wipe

0 Off

AUTO Automatic wipe or single
sweep.
In the Intermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In AUTO mode, the wiping speed is in
proportion to the intensity of the rain-
fall.

The wiping must be reacti-
vated if the ignition has been
switched off for more than one
minute .

5VISIBILITY
74
Maintenance position
This position enables the wiper blades
to be removed.
In the minute following switching off of
the ignition, any action on the wipers
stalk positions the wipers at the top
of the windscreen (parking in winter,
cleaning, replacement of the blades).
To reposition the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk
towards you. The windscreen wash
then the windscreen wipers operate
for a i xed period.
The headlamp wash is also activated,

if the headlamps are on.
Screenwash/headlampwash low When the minimum level
of the reservoir is reached,
this warning light comes on,
accompanied by an audible
signal and a message on the
multi-function display.
Next time you stop, i ll the screen-
wash/headlamp wash reservoir.
If the reservoir is empty, the warning
light comes on when the ignition is
switched on, or every time the stalk is
operated, until the reservoir is i lled. Automatic windscreen wiper
The automatic wiping is controlled by a
rain sensor, i tted on the windscreen.
In
AUTO mode, the wipers operate
automatically and adjust their speed
to the intensity of the rainfall .
Activation
Deactivation This warning light comes
on on the instrument panel,
accompanied by a message
on the multifunction display,
when the driver presses the
wipers stalk down in AUTO mode.
This warning light comes
on on the instrument panel
when the driver moves the
wipers stalk to position I , 1
or 2 .
In the event of a malfunction , the
driver is informed of this by a message
on the multifunction display.
In AUTO mode, the wipers will then
operate in intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Do not cover the rain sensor,
located on the windscreen
behind the interior mirror.
When using a car wash, switch
off the ignition.
In winter, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic wipers.
When parking in snowy weather,
position the blades at the top of the
windscreen (maintenance position) to
prevent the accumulation of snow.

5VISIBILITY
74
Maintenance position
This position enables the wiper blades
to be removed.
In the minute following switching off of
the ignition, any action on the wipers
stalk positions the wipers at the top
of the windscreen (parking in winter,
cleaning, replacement of the blades).
To reposition the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk
towards you. The windscreen wash
then the windscreen wipers operate
for a i xed period.
The headlamp wash is also activated,

if the headlamps are on.
Screenwash/headlampwash low When the minimum level
of the reservoir is reached,
this warning light comes on,
accompanied by an audible
signal and a message on the
multi-function display.
Next time you stop, i ll the screen-
wash/headlamp wash reservoir.
If the reservoir is empty, the warning
light comes on when the ignition is
switched on, or every time the stalk is
operated, until the reservoir is i lled. Automatic windscreen wiper
The automatic wiping is controlled by a
rain sensor, i tted on the windscreen.
In
AUTO mode, the wipers operate
automatically and adjust their speed
to the intensity of the rainfall .
Activation
Deactivation This warning light comes
on on the instrument panel,
accompanied by a message
on the multifunction display,
when the driver presses the
wipers stalk down in AUTO mode.
This warning light comes
on on the instrument panel
when the driver moves the
wipers stalk to position I , 1
or 2 .
In the event of a malfunction , the
driver is informed of this by a message
on the multifunction display.
In AUTO mode, the wipers will then
operate in intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Do not cover the rain sensor,
located on the windscreen
behind the interior mirror.
When using a car wash, switch
off the ignition.
In winter, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic wipers.
When parking in snowy weather,
position the blades at the top of the
windscreen (maintenance position) to
prevent the accumulation of snow.

5VISIBILITY
75
COURTESY LIGHTS Deactivation
Activation
To re-activate the automatic lighting,
press switch 1 again. Sill illumination
The sill lighting is at the bottom of each
door trim.
The lights come on automatically
when a door is opened and switch off
automatically when all of the doors are
closed.
Boot light
The boot light is located in the left boot
trim.
It comes on automatically when the
boot is opened and switches of auto-
matically when the boot is closed.

1. Front courtesy light

2. Front map reading lights
With the ignition on, operate the relevant switch.

3. Rear courtesy light

4. Rear map reading lights
With the ignition on, operate the relevant switch.
Pressing switch 1 switches on the
front and rear courtesy lights for ten
minutes.
The front and rear courtesy lights come
on automatically when the ignition key
is removed, on unlocking the vehicle
or on opening one of the doors.
They gradually go off after the ignition
has been switched on or the vehicle
is locked. The courtesy lights can be deacti-
vated by pressing switch
1 for more
than three seconds. Pressing switch

1 briel y switches the front and rear
courtesy lights on and off.
The map reading lights are not affected
by this and can still be switched on .

6LAYOUT
76
SUN VISOR WITH
ILLUMINATED COURTESY
MIRROR
AREAS FOR TOLL CARDS/
CAR PARK TICKETS
AIR CONDITIONED GLOVE
BOX
* DT colour screen only.
With the ignition on, the mirror is auto-
matically lit up when the l ap is opened. The athermic windscreen has two non-
rel ective zones located either side of
the base of the interior mirror.
They are intended for afi xing toll cards
and/or car park tickets. This is i tted with a lock.
To open the glove box, lift the handle.
The glove box is lit up when the cover
is opened.
The glove box has a vent
A that can
be closed, which produces the same
conditioned air as the vents in the pas-
senger compartment.
It also has a pen holder B and three
sockets * C for connecting video equip-
ment.

6LAYOUT
77
Front armrest CENTRE CONSOLE
To obtain a resting or driving position:

 Lift the centre handle 1 and pull the
armrest forwards. To return to the
initial position, push the armrest
backwards.
To open the lower compartment:

 Raise the left handle 2 . CDs and
coins can be stored here.
To open the top compartment:

 Raise the right handle 3 . This is
equipped with a can holder.
1 - Storage compartment
2 - Front lighter (100 W max)
Press and wait for a few moments until
it springs out automatically.
3 - Front ashtray
Press the cover to open the ashtray.
To release the ashtray for emptying,
open it then push the cover down-
wards.
4 - Rear ashtray
Press the cover to open the ashtray.
To empty the ashtray, detach the re-
ceptacle by pulling it towards you.
To rei t the ashtray, clip it back into its
housing.
5 - Rear lighter (100 W max)
Push in and wait for a few moments
until it springs out automatically.