mirror PEUGEOT 607 2007 Owners Manual

Page 8 of 187

FAMILIARISATION
Electric mirror adjustment
Steering wheel adjustment

 48

 49

A. Steering wheel height and depth
adjustment locking and release
control.

1. Released position.

2. Locked position.
B. Exterior mirrors selection, adjustment
and folding control.

1. Selection of the driver's mirror.

2. Central position "  ".

3. Selection of the passenger mirror.

Also...

4. Folding of the mirrors.
Rear bench seat
The bench seat back can be folded in
two 1/3 - 2/3 sections.
The release controls are located in the
boot.
Before folding the seat back:

 check that the seat belt strap is
positioned correctly on the side of
the seat back (1/3 or 2/3),

 release the centre seat belt strap
by pressing the black button on the
buckle (2/3).
When returning the seat back to the
upright position, take care not to trap
the seat belt.

 53

Page 9 of 187

FAMILIARISATION
Front seat belts

 65
Electric window controls

1. Driver's electric window control.

2. Passenger electric window control.

3. Rear right electric window control.

4. Rear left electric window control.

Also...

5. Deactivation of the electric
window controls located in
the rear (child safety).

 83

1. Fastening.

2. Height adjustment.
Mirrors with automatic tilting
when parking function **
Initial setting of the function
(memorisation)

 With the engine running, engage
reverse gear.

 Select and adjust the left and right
mirrors in succession using button B .

 48
** According to version.
Tilting the mirror to the parking
position (use)

 Turn control B to the right or to the
left, then engage reverse gear.
Returning the mirror to the normal
position

 Exit reverse gear or place button B
in the central position "  "

Page 11 of 187

FAMILIARISATION

1. Driver's automatic comfort
programme.

2. Passenger automatic
comfort programme.

3. Driver's temperature
adjustment.

4. Passenger temperature
adjustment.

5. Air l ow adjustment.

6. System off.

7. Passenger air distribution
adjustment.
8. Driver's air distribution
adjustment.

9. Automatic visibility
programme (demisting).

10. Air intake/air recirculation.
11. Rear screen and exterior
mirrors demisting.

12. Air conditioning on/off (A/C).

 44
Dual zone automatic air
conditioning
Use of the automatic regulation of the
air conditioning is recommended.

Page 47 of 187

3COMFORT
47

10 - Intake of exterior air/Recirculation
of interior air
This function enables you to iso-
late the passenger compartment
from exterior fumes and odours.

11 - Rear screen and mirrors demisting

 Press this button, with the
engine running, to demist
the rear screen and the
exterior mirrors.
Demisting is switched off au-
tomatically to avoid an excessive con-
sumption of current and in relation to
the exterior temperature.
It may be stopped by pressing this
button again or when the engine is
switched off.
However, the demisting resumes if the
engine is switched on again within one
minute.
Switch off the rear screen and exterior
mirrors demisting when you consider
this necessary as low current con-
sumption reduces fuel consumption.
12 - Air conditioning On/Off (A/C)
The deactivation of this func-
tion may result in tempera-
ture, humidity, odour and
smoke discomfort.

 Press this button to switch off the
air conditioning.
The symbol "A/C" is switched off.

 Press this button again to return to
automatic operation of the air con-
ditioning.
The symbol "A/C" is displayed.

 Press this button to set the air
intake mode, the indicator light
comes on in recirculation mode.
Prolonged operation in interior air
recirculation mode may result in
the formation of condensation and
deterioration of the quality of the
interior air.
Do not drive in air recirculation mode for prolonged periods, ex-
cept in truly exceptional atmos-
pheric conditions.
The message associated with the control is displayed on the multi-
function display.

 Press this button again to return to
automatic control of the air intake.

For your comfort, when the igni-
tion is switched off, the settings are
stored until it is switched on again.

Page 48 of 187

3COMFORT
48
MIRRORS
Automatically adjustable mirrors
for parking *
These allow you to see the ground
(kerb, wall...) when carrying out park-
ing manoeuvres in reverse gear. The end of the driver and pas-
senger mirrors is convex in or-
der to reduce the "blind spot"
(area at edge dei ned by a
dotted line).
As a result, objects observed in the
driver and passenger mirrors are, in re-
ality, closer than they appear.
This must be taken into account to
judge correctly the distance of vehi-
cles approaching from behind.
Tilting the mirror to the parking
position

 Turn control A to the right or to the
left.

 Engage reverse gear.
The exterior mirror corresponding to the side on which you are
parking tilts downwards.
Exterior mirrors - from outside:

 Lock the vehicle using the remote
control.

When the vehicle is parked, the exterior
mirrors can be folded back manually.
* According to version.
Adjustment

 Turn knob A to the right or to the
left to select the corresponding
mirror.

 Move knob A in all four directions
to adjust.
Folding back the mirrors
electrically
- from inside:

 With the ignition on, turn knob A
rearwards.
If the mirrors are folded back using
knob A , they will not unfold when the
vehicle is unlocked using the remote
control. You must turn knob A again. Automatic day/night exterior
mirrors
These darken automatically depend-
ing on the brightness from the rear.
They are linked with the automatic
day/night interior mirror (see para-
graph "Automatic day/night interior
mirror").
To ensure maximum visibility during
manoeuvres, the mirror clears automat-
ically when reverse gear is engaged.
Initial setting of the function

 Engage reverse gear.

 Select and adjust the left and right
mirrors in succession.
These settings will be stored when the
vehicle is locked. Returning the mirror to the normal
position

 Change out of reverse gear.
After a few seconds, the glass of the
corresponding mirror resumes its
normal position.
You can deactivate the function by return-
ing control A to the central position " 

Page 49 of 187

3COMFORT
Automatic day/night interior
mirror Operation

Switch on the ignition and press switch
1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mir-
ror clears automatically when
reverse gear is engaged.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
 When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .

 Adjust the height and depth of the
steering wheel.

 Lock by pulling handle A fully.

Page 50 of 187

3COMFORT
Automatic day/night interior
mirror Operation

Switch on the ignition and press switch
1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mir-
ror clears automatically when
reverse gear is engaged.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
 When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .

 Adjust the height and depth of the
steering wheel.

 Lock by pulling handle A fully.

Page 53 of 187

3COMFORT
52
Memorising driving and mirror
positions
Memorising using the controls on
the driver’s door
To memorise:

 Place the key in the ignition on po-
sition,

 Adjust your seat and mirrors,

 Press button M , then button 1 "i rst
driving position" or button 2 "sec-
ond driving position" within four
seconds.
An audible signal coni rms that a posi-
tion has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
Ignition on, vehicle stationary

 Briel y press button 1 or 2 to recall
the corresponding memorised
position. The end of the setting is
indicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0:
Off.
1: Low.

2: Medium.
3: High. The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving

 Keep button 1 or 2 pressed down
until the bleep indicates that setting
of the corresponding memorised
position is complete.

Page 54 of 187

3COMFORT
52
Memorising driving and mirror
positions
Memorising using the controls on
the driver’s door
To memorise:

 Place the key in the ignition on po-
sition,

 Adjust your seat and mirrors,

 Press button M , then button 1 "i rst
driving position" or button 2 "sec-
ond driving position" within four
seconds.
An audible signal coni rms that a posi-
tion has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
Ignition on, vehicle stationary

 Briel y press button 1 or 2 to recall
the corresponding memorised
position. The end of the setting is
indicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0:
Off.
1: Low.

2: Medium.
3: High. The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving

 Keep button 1 or 2 pressed down
until the bleep indicates that setting
of the corresponding memorised
position is complete.

Page 86 of 187

5VISIBILITY
74
Maintenance position
This position enables the wiper blades
to be removed.
In the minute following switching off of
the ignition, any action on the wipers
stalk positions the wipers at the top
of the windscreen (parking in winter,
cleaning, replacement of the blades).
To reposition the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk
towards you. The windscreen wash
then the windscreen wipers operate
for a i xed period.
The headlamp wash is also activated,

if the headlamps are on.
Screenwash/headlampwash low When the minimum level
of the reservoir is reached,
this warning light comes on,
accompanied by an audible
signal and a message on the
multi-function display.
Next time you stop, i ll the screen-
wash/headlamp wash reservoir.
If the reservoir is empty, the warning
light comes on when the ignition is
switched on, or every time the stalk is
operated, until the reservoir is i lled. Automatic windscreen wiper
The automatic wiping is controlled by a
rain sensor, i tted on the windscreen.
In
AUTO mode, the wipers operate
automatically and adjust their speed
to the intensity of the rainfall .
Activation
Deactivation This warning light comes
on on the instrument panel,
accompanied by a message
on the multifunction display,
when the driver presses the
wipers stalk down in AUTO mode.
This warning light comes
on on the instrument panel
when the driver moves the
wipers stalk to position I , 1
or 2 .
In the event of a malfunction , the
driver is informed of this by a message
on the multifunction display.
In AUTO mode, the wipers will then
operate in intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Do not cover the rain sensor,
located on the windscreen
behind the interior mirror.
When using a car wash, switch
off the ignition.
In winter, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic wipers.
When parking in snowy weather,
position the blades at the top of the
windscreen (maintenance position) to
prevent the accumulation of snow.

Page:   1-10 11-20 next >