mirror controls PEUGEOT 607 2007 Owners Manual

Page 8 of 187

FAMILIARISATION
Electric mirror adjustment
Steering wheel adjustment

 48

 49

A. Steering wheel height and depth
adjustment locking and release
control.

1. Released position.

2. Locked position.
B. Exterior mirrors selection, adjustment
and folding control.

1. Selection of the driver's mirror.

2. Central position "  ".

3. Selection of the passenger mirror.

Also...

4. Folding of the mirrors.
Rear bench seat
The bench seat back can be folded in
two 1/3 - 2/3 sections.
The release controls are located in the
boot.
Before folding the seat back:

 check that the seat belt strap is
positioned correctly on the side of
the seat back (1/3 or 2/3),

 release the centre seat belt strap
by pressing the black button on the
buckle (2/3).
When returning the seat back to the
upright position, take care not to trap
the seat belt.

 53

Page 9 of 187

FAMILIARISATION
Front seat belts

 65
Electric window controls

1. Driver's electric window control.

2. Passenger electric window control.

3. Rear right electric window control.

4. Rear left electric window control.

Also...

5. Deactivation of the electric
window controls located in
the rear (child safety).

 83

1. Fastening.

2. Height adjustment.
Mirrors with automatic tilting
when parking function **
Initial setting of the function
(memorisation)

 With the engine running, engage
reverse gear.

 Select and adjust the left and right
mirrors in succession using button B .

 48
** According to version.
Tilting the mirror to the parking
position (use)

 Turn control B to the right or to the
left, then engage reverse gear.
Returning the mirror to the normal
position

 Exit reverse gear or place button B
in the central position "  "

Page 53 of 187

3COMFORT
52
Memorising driving and mirror
positions
Memorising using the controls on
the driver’s door
To memorise:

 Place the key in the ignition on po-
sition,

 Adjust your seat and mirrors,

 Press button M , then button 1 "i rst
driving position" or button 2 "sec-
ond driving position" within four
seconds.
An audible signal coni rms that a posi-
tion has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
Ignition on, vehicle stationary

 Briel y press button 1 or 2 to recall
the corresponding memorised
position. The end of the setting is
indicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0:
Off.
1: Low.

2: Medium.
3: High. The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving

 Keep button 1 or 2 pressed down
until the bleep indicates that setting
of the corresponding memorised
position is complete.

Page 54 of 187

3COMFORT
52
Memorising driving and mirror
positions
Memorising using the controls on
the driver’s door
To memorise:

 Place the key in the ignition on po-
sition,

 Adjust your seat and mirrors,

 Press button M , then button 1 "i rst
driving position" or button 2 "sec-
ond driving position" within four
seconds.
An audible signal coni rms that a posi-
tion has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
Ignition on, vehicle stationary

 Briel y press button 1 or 2 to recall
the corresponding memorised
position. The end of the setting is
indicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0:
Off.
1: Low.

2: Medium.
3: High. The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving

 Keep button 1 or 2 pressed down
until the bleep indicates that setting
of the corresponding memorised
position is complete.