display PEUGEOT 807 2003 User Guide

Page 83 of 184

12-05-2003
The contextual menu associated with
the 8
$ + &8 applica-
tion appears as a superimposed dis-
play, when this is the application cur-
rently in use in the main screen window. This menu is limited to the following functions:
– changing of the initial route (entering of a diversion),
– switching to "Selection - Movement on map" mode*,
– storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
– changing of the route calculation criteria,
– stopping or resuming of guidance (displaying of the message whichchanges depending on the previousstatus).
&&& )&82822C The map guidance can be displayed in two ways:
– full screen map**,
– reduced size map on the right-hand side and zoom image of the junction on the left-hand side.
To switch from one to the other,press the dial for more than two seconds. The 828 application has two ope-
rating modes: – 8&& + &'&  '28 mode,
– 8&)& 65$  '28mode.
A 8D'8 function enables you to
enlarge the map, in accordance withthe eleven preset levels relating tothe following scales:
– 100 m/cm, 200 m/cm, 500 m/cm,
– 1 km/cm, 2 km/cm, 5 km/cm,
– 10 km/cm, 20 km/cm, 50 km/cm,
– 100 km/cm, 200 km/cm. This is achieved by turning the dial.


 
.
8
$+&8
&E'&
8&&+&'&'28'& This mode permits:
– selection of any point on the map
to obtain guidance towards it or to obtain information about it (postal
address if available or, if it is not,GPS co-ordinates),
– lateral movement on the map by means of the four directionalarrows, representing the four cardi-nal points (North, East, South,
West),
– zooming in on the map in accor- dance with the eleven preset levels,
– displaying of the 828contextual
menu.

Page 84 of 184

12-05-2003


 0
This mode permits:
– displaying of the vehicle on the map with the route proposed by the navigation if the guidance isactive,
– zooming in on the map in accor- dance with the eleven preset levels,
– displaying of the 8
$ +
&8 contextual menu.
8&)&65$'28'&
From the
$&& '& , the main
828 menu offers various options
for guidance management:
– switching to "Selection - Movement on map" mode,
– direction of the map towards the North or in the direction of the vehicle,
– recentering of the map around the vehicle,
– opening of the services selection window visible on the map, suchas hotels, service stations, etc.
– displaying of the window for enter- ing the description for recordingthe current position of the vehiclein a directory file.
2CThe contextual menu associated with the
828application and with
the 8&& + &'& 
'28 mode appears as a superim-
posed display, when these are in use
in the main screen window. This menu is limited to the following functions:
– displaying of the information on the location selected on the map,
– selection of a location on the map as a destination,
– storing of the location selected (postal address if available or, if it is not, GPS co-ordinates, so thatthey can be recorded in a directoryfile),
– switching to "Vehicle following on map" mode.
* DT colour screen only.
** During the year.
828&E'&

Page 170 of 184

12-05-2003
 
 

    

 !"#$%
&!'%' Less than a minute after switching
off the ignition, operate the wipersstalk to position the wiper bladesalong the windscreen uprights(maintenance position).
("' !"#$  Lift the wiper arm, then disconnectthe windscreen-wash pipe.
 Unclip the blade and remove it.
 Fit the new blade.
 Reconnect the windscreen-washpipe and push back the wiper arm.
' ")"  $%" !"%
'"'"&!'%'*% '
 ' $ '!" 
!"%%+,
"" !"#$  Lift the wiper arm, then unclip the blade and remove it.
 Fit the new blade and push backthe wiper arm.  - 
.  After the engine has stopped, with the key in the accessories position,
certain functions (windscreen wiper,electric windows, courtesy lights,audio equipment etc.) can only beused for thirty minutes, to prevent
discharging the battery.
Once the thirty minutes are over, the message
/''&0 &'$ 1/
appears on the multifunction displayand the active functions are put on
standby.
A flat battery will prevent the engine from starting.

Page:   < prev 1-10 11-20