PEUGEOT 807 2007 Manual Online

80
04 TRIP COMPUTER
Each press of the button, located at the end of the wipers stalk, permits displaying of the different trip computer data in succession, depending on the displ ay.
- the "vehicle" tab with:• the range, the current consumption and the distance remaining to the destination,- the "1" tab (route 1) with:•the average speed, the average consumption and the distance travelled calculated over route "1",- the "2" tab (route 2) with the same characteristics for a second route.
A few definitions
Range: Displays the distance which can be travelled with t he remaining fuel detected in the tank, in relation to the average consumption over the last few miles (kilometres).This displayed value may vary significantly followin g a change in the vehicle speed or the relief of the route.When the range falls below 20 miles (30 km), dashes are displayed. After filling with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).If, whilst driving, dashes are displayed continuous ly in place of digits, contact a PEUGEOT dealer.
Current consumption: only calculated and displayed above 20 mph (30 km/h).
Average consumption: this is the average quantity of fuel consumed since the last trip recorder zero reset.
Distance travelled: calculated since the last trip computer zero reset.
Distance remaining to the destination: calculated with reference to the final destination, entered by the user. If guidance is activated, the navigation system calculates it as a current value.
Average speed: this is the average speed calculated since the last trip computer zero reset (ignition on).Zero resetWhen the required route is displayed, press the con trol for more than two seconds.

81
RADIO: selection of a higher stored station.CD CHANGER: selection of the next CD.Selection of the next item on a menu.Forwards scrolling of the RADIO and CD lists.MP3: selection of the next directory.
RADIO: selection of a lower stored station.CD CHANGER: selection of the previous CD.Selection of the previous item on a menu.Backwards scrolling of the RADIO and CD lists.MP3: selection of the previous directory.
RADIO: automatic search for a higher frequency.CD/CD CHANGER/MP3: selection of the next track.Continuous press: fast forwards play.Selection of the previous item.
RADIO: automatic search for a lower frequency.CD/CD CHANGER/MP3: selection of the previous track. Continuous press: fast backwards play.Selection of the next item.
Volume increase.
Volume decrease.
05 CONTROL SHORT-CUTS
Mute: press the volume increase and decrease buttons simultaneously.
Restore the sound by pressing one of the two volume buttons.
- Change of sound source.- Confirmation of a selection.
STEERING WHEEL CONTROLS

55
66
77
88
11
22
33
44
82
06 CONFIGURATION
ADJUSTING THE DATE
AND TIME
Press the MENU button.
Using the arrows, select the PERSONALISATION CONFIGURATION function.
Press to confirm the selection.
Using the arrows, select the DISPLAY CONFIGURATION function.
Press to confirm the selection.
Press to confirm the selection.
Using the arrows, select the ADJUST DATE AND TIME function.
Adjust the parameters one by one confirming by pressing the OK button. Next select the OK tab on the display then confirm.
DISPLAY CONFIGURATION
ADJUST DATE AND TIME
OK
PERSONALISATION CONFIGURATION

123
2312
4
34
34
2
4
34
4
4
4
34
4
4
34
1234343423434
1232323
233333333
83
AUDIO FUNCTIONSFM BAND PREFERENCESalternative frequencies (RDS)activate/deactivateregional mode (REG)activate/deactivateradio-text information (RDTXT)activate/deactivateAUDIO CD PREFERENCEScd changer repeat (RPT)activate/deactivatetrack random play (RDM)activate/deactivate
07 DISPLAY FLOW CHART
PERSONALISATION-CONFIGURATIONDEFINE THE VEHICLE PARAMETERSparking assistanceparking assistanceactivation of rear wiper in reverse gearlighting and signallingautomatic lighting of headlampsguide-me-home headlamps (duration: x seconds)DISPLAY CONFIGURATIONvideo brightness adjustmentnormal videoinverse videobrightness (- +) adjustmentdate and time adjustmentday/month/year adjustmenthour/minute adjustmentchoice of 12 h/24 h modechoice of unitsl/100 km - mpg - km/l°Celsius/°FahrenheitCHOICE OF LANGUAGEDeutschEnglishEspanolFrancaisItalianoNederlandsPortuguesPortugues brasil
MAIN FUNCTIONCHOICE Achoice A1choice A2CHOICE B...
TRIP COMPUTERENTER DISTANCE TO DESTINATIONdistance: x kmWARNING LOGdiagnosticsSTATUS OF FUNCTIONSfunctions activated or deactivated

84
RT3
AUDIO EQUIPMENT/TELEPHONE/GPS
CONTENTS
• 01 First steps pg. 85
• 02 Display and general menu pg. 86
• 03 GPS pg. 88
• 04 Audio pg. 95
• 05 Telephone pg. 97
• 06 Trip computer pg. 100
• 07 Control short-cuts pg. 102
• 08 Configuration pg. 105
• 09 Display flow charts pg. 107
The RT3 GPS audio/telephone is coded in such a way that it will only operate in your vehicle. If it is to be installed in another vehicle, contact your PEUGEOT dealer for configuration of the system.
For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary.
The INFOTEC internet site provides additional anima ted information on the RT3. It can be consulted at the following address: http://public.infotec.peugeot.comSimple registration permits access and free consult ation of the handbook.
84

85
01 FIRST STEPS01 FIRST STEPS
Selection of the source: radio, CD, CD changer and auxiliary (AUX).
Long press on the SOS button: emergency call.
On/Off.Volume adjustment.
Selection of the FM1, FM2, FMast, AM wavebands.
Keypad for entering descriptions by means of successive presses.
Access to the "PEUGEOT" services menu.Displaying of the general menu.
SIM card flap.
Cancellation of the current operation.
- Selection of a lower/higher frequency.- Selection of the previous/next CD.- Selection of the previous/next MP3 directory.
- Automatic search for a lower/higher frequency.- Selection of the previous/next track on CD or MP3.
Selection and confirmation.
Selection of the screen display mode.

86
02 DISPLAY AND GENERAL MENU
> COLOUR DISPLAY DT
This displays the following information, via the RT3 audio/telephone control pad:- the time,- the date,- the exterior temperature (if there is a risk of ice, you are warned by a message),- the audio source displays (radio, CD, ...),- the telematic system displays (telephone, service s, ...),- the accesses check (doors, boot, ...),- the warning messages (e.g.: "Fuel level low") and vehicle function status messages (e.g.: "Auto lighting activated") displayed temporarily,- the trip computer display,- the satellite navigation system displays.
In order to be able to use all of the functions of your system, you have two CD-ROMs:- one, "Configuration", contains the software and th e various display and vocal information languages,- the other, "Navigation", contains the satellite navigation system map data.

87
02 DISPLAY AND GENERAL MENU
AUDIO FUNCTIONS: radio, CD, parameters, options.
TELEPHONE functions: services, telephone functions, SMS.
CONFIGURATION: vehicle parameters, display, time, languages.
MAP: GPS, details, orientation.
VIDEO: activation, parameters.
DIRECTORY: telephone and GPS.NAVIGATION: GPS, traffic information, options.
> GENERAL MENU COLOUR DTTRIP COMPUTER: speed, consumption, distance.

11
22
33
55
77
44
66
88
88
03 GPS
ENTERING AN ADDRESS AND
ACTIVATING GUIDANCE
Press the MENU button.
Turn the dial and select the NAVIGATION function.
Press the dial to confirm the selection.
Turn the dial and select the DESTINATION CHOICE function.
Press the dial to confirm the selection.
Press the dial to confirm the selection.
Turn the dial and select the ENTER AN ADDRESS function.
Turn the dial and select the TOWN function.
TOWN
ENTER AN ADDRESS
The navigation CD ROM:Insert the navigation CD ROM in the drive on the control panel and leave it there in order to use the Navigation functions.
DESTINATION CHOICE

99
1111
1212
1313
1515
10101414
89
Press the dial to confirm the selection.
Turn the dial and select the letters of the town one by one confirming each time by pressing the dial.
Turn the dial and select the OK function.
Press the dial to confirm the selection.
Use the alphanumeric keypad to enter the letters and digits and * to correct.Press the dial to confirm the selection.
Select the OK function on the ENTER AN ADDRESS page.
Repeat steps 8 to 12 for the ROAD and N° functions.
PARISOK
OKSelect the STORE function to record the address ent ered in a directory record and press the dial to confirm the selection.
STORE