Peugeot Boxer Dag 2005 Workshop Manual

3839
02-08-2004
Map optionsIf you select "Map options" from the
main menu, by pressing the knob,
you will gain access to a new page
with the following sub-menu:
F Draw map
F Zoom intersection
F Draw icon
F Draw wording
F Draw RDS-TMC
F Draw areas
F OK "Draw map" function
This enables you to choose the di-
rection of the map on the display.
The options available are
"Directed
north" and "Directed automati-
cally" .
To validate the option, select "OK".
"Zoom intersection" function
This enables you to activate or de-
activate the map enlargement func-
tion when the vehicle approaches an
intersection.
To validate the option, select "OK".
"Draw icon" function
This enables you to activate or deac-
tivate the representation on the map,
by means of icons, of the selected
centres of interest (hotels, service
stations, restaurants).
To validate the option, select "OK".
"Draw wording" function
This enables you to activate or de-
activate the representation of town
names on the map.
To validate the option, select "OK". "Draw RDS TMC" function
This function enables you to activate
or deactivate the representation
on the map, by means of icons, of
the categories of RDS TMC events
("NO", "Trafic", "Weather", "Info").
To validate the option, select
"OK".
"Draw areas" function
This enables you to access the map
representation options. The options
available are: F NO (representation with seg-
ments of road, rivers, ...)
F 2D (representation with segments
and coloured polygons)
F 3D (three-dimensional represen-
tation)
To validate the option, select "OK".
01-01 -200 5

38
02-08-2004
39
"Highway" function
This enables you to activate or de-
activate the system's authorisation to
include motorways when calculating
the route.
To validate the option, select "OK".
"Route type" function
This enables you to choose one of
the main criteria for calculation of
the route.
The options available are
"Shortest
time" to favour motorways and main
roads and "Shortest distance" to
choose the shortest route.
To validate the option, select "OK".
Route options
If you select "Route options" from
the main menu, by pressing the
knob, you gain access to a new page
which enables you to deine your
preferences for calculation of the
route, with the following sub-menu:
F Route type
F Highway
F OK
01-01 -200 5

40
01-01-200 5
REAR VIEW ASSISTANCE
When reversing, this system enables
you to display the images from the
video camera installed at the rear of
your vehicle. Adjusting the brightness
To adjust the brightness of the
display, turn knob
H clockwise to
increase the brightness or anti-clock-
wise to reduce it.
In bad or wintry weather,
ensure that the video
camera is not covered
with mud, frost or snow.
Activation
With the ignition key in the
"On" po-
sition, the system switches on when
reverse gear is engaged.
All of the controls are disarmed, with
the exception of:
- the "MAIN DARK" button (switch
the display on or to standby
mode),
- button L (PEUGEOT customer
contact centre),
- the "SRC" button (selection of the
audio source),
- button O (pick up-hang up),
- knob H "SEL" (adjustment of the
display brightness),
- knob B (volume adjustment).

18
01-01-2005
19
01-01-2005
1 - Coolant temperature gauge.
2 - Coolant temperature warning
light.
3 - Speedometer.
4 - Left-hand direction indicator.
5 - Side lights and dipped beam
headlamps indicator light.
6 - Main beam headlamps indicator
light.
7 - Right-hand direction indicator.
8 - Rev counter. 9 -
Low fuel level warning light.
10 - Fuel gauge.
11 - Brake luid level warning light.
12 - Traction control (ASR) warning
light.
13 - Passenger air bag disarmed
warning light.
14 - Trip distance recorder display
control and zero reset button. 15 -
Front air bags warning light.
16 - Anti-lock braking system (ABS)
warning light.
17 - Automatic gearbox temperature
or fault warning light.
18 - Low coolant level warning light.
19 - Service indicator, oil level
gauge, automatic gearbox
display, clock and total distance
recorder.
20 - Diesel engine pre-heating
warning light.
21 - Engine oil pressure warning
light.
22 - Battery charge warning light.
23 - Clock setting button.
24 - Engine diagnostics warning
light.
25 - Front brake pad wear warning
light.
26 - Handbrake warning light.
27 - Water in diesel ilter warning light.
28 - Electronic immobiliser key
warning light.
PETROL-DIESEL MANUAL AND AUTOMATIC GEARBOX
INSTRUMENT PANELS
INSTRUMENTS AND CONTROLS

18
01-01-2005
19
01-01-2005
INSTRUMENTS AND
CONTROLS
A permanently lit warning light or
one that lashes while the engine
is running indicates an operating
fault. The illumination of certain
warning lights may be accompa-
nied by a bleep and a message
on the multi-function display. Do
not ignore this warning: contact
your PEUGEOT dealer as soon as
possible.
Engine oil pressure
warning light
This comes on for a few
seconds when the ignition is
switched on.
Illumination of this warning light while
the engine is running indicates that
the oil pressure or level is too low.
Stop immediately.
If there is a lack of oil in the lubrica-
tion circuit, top it up.
Contact a PEUGEOT dealer as soon
as possible.
Low coolant level
warning light
Illumination of this warning
light indicates that the coolant level
is too low.
Stop immediately.
Warning: allow the engine to cool
before topping up.
The cooling circuit is pressurised.
To avoid any risk of scalding, un-
screw the cap by two turns to allow
the pressure to drop.
When the pressure has dropped, re-
move the cap and top up the level.
Contact a PEUGEOT dealer.
Coolant temperature
warning light
This comes on for a few sec-
onds when the ignition is switched on.
Illumination of this warning light in-
dicates an abnormal increase in the
coolant temperature.
Stop immediately.
Contact a PEUGEOT dealer.
Low brake fluid level
warning light
Illumination of this warning
light while the engine is running indi-
cates that the handbrake is applied
or has not been released correctly, or
that the brake luid level is too low.
Simultaneous illumination of the ABS
warning light and the low brake luid
level warning light indicates a brake
force distribution system fault.
Stop immediately.
Contact a PEUGEOT dealer.
Handbrake warning
light
This comes on for a few
seconds when the ignition is
switched on.
Illumination of this warning light indi-
cates that the handbrake is applied
or has not been released correctly.
INSTRUMENTS AND CONTROLS

20
01-01-2005
21
01-01-2005
Battery charge warning
light
This comes on when the
ignition is switched on.
If it comes on while the engine is
running, it may indicate:
- faulty operation of the charging circuit,
- slack battery or starter terminals,
- a cut or slack alternator belt,
- an alternator failure.
Contact a PEUGEOT dealer.
Anti-lock braking
system (ABS) warning
light
If the warning light remains on or
comes on above 7 mph (12 km/h),
this indicates an ABS system fault.
Nevertheless, the vehicle retains
conventional assisted braking.
Contact a PEUGEOT dealer.
Traction control (ASR)
warning light
If the warning light remains
on or comes on while the engine is
running and the vehicle is moving,
contact a PEUGEOT dealer.
It lashes when the system comes
into operation and comes on perma-
nently when the system is disarmed.
Water in diesel filter
warning light
This comes on for a few sec-
onds when the ignition is switched on.
Illumination of this warning light indi-
cates that there is water in the diesel
ilter.
There is a risk of damage to the
injection system.
Contact a PEUGEOT dealer as soon
as possible.Engine autodiagnostics
warning light
This comes on when the
ignition is switched on.
If it comes on while the engine is
running, it indicates:
- an emission control system fault,
or
- a particulate emission ilter fault.
If it lashes while the engine is run-
ning, this indicates an injection or ig-
nition system fault. There is a risk of
destruction of the catalytic converter
(petrol engine only).
Contact a PEUGEOT dealer as soon
as possible.
Passenger air bag
disarmed warning light
This comes on for a few seconds
when the ignition is switched on.
If the passenger air bag is disarmed,
the warning light comes on when the
ignition is switched on and stays on.
In all cases, if the warning light lash-
es, contact a PEUGEOT dealer.
Diesel engine
pre-heating warning
light
This comes on when the ignition is
switched on.
Wait until it goes out before operating
the starter.
INSTRUMENTS AND CONTROLS

20
01-01-2005
21
01-01-2005
Air bag warning light
The warning light comes on
for a few seconds when the
ignition is switched on.
Illumination of this warning light while
the engine is running indicates:
- a front air bag fault,
or
- a side air bag fault.
Contact a PEUGEOT dealer.
Low fuel level warning
light
The warning light comes on
for a few seconds when the ignition
is switched on.
Illumination of this warning light while
the engine is running indicates that
the fuel level is low.
When the warning comes on, you
have at least 8 litres of fuel left.
Front brake pad wear
warning light
Lighting of this warning light while
the engine is running and the vehicle
is moving and when you press the
brake pedal indicates extreme wear
of the front brake pads.
Contact a PEUGEOT dealer as soon
as possible.
Electronic immobiliser
key warning light
This comes on for a few
seconds when the ignition is
switched on.
Flashing of this warning light, after
the ignition has been switched on,
indicates an operating anomaly.
If this warning light comes on (perma-
nently) after the ignition is switched
on, check the identiication of the key.
Contact a PEUGEOT dealer as soon
as possible.
Automatic gearbox
temperature or fault
warning light
This comes on for a few seconds
when the ignition is switched on.
Illumination or lashing of this warn-
ing light while the engine is running
and the vehicle is moving indicates
an automatic gearbox fault or an
excessive automatic gearbox tem-
perature.
Stop immediately.
Allow the engine to run at idle (lever
in position N or P) until the warning
light switches off.
Contact a PEUGEOT dealer as soon
as possible.
Coolant temperature gauge
When the needle is in zone A, the
temperature is correct.
When the needle is in zone B, the
temperature is too high.
Stop immediately.
Warning: allow the engine to cool
before topping up.
The cooling circuit is pressurised.
To avoid any risk of scalding, un-
screw the cap by two turns to allow
the pressure to drop.
When the pressure has dropped, re-
move the cap and top up the level.
Contact a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS

20
01-01-2005
21
01-01-2005
Air bag warning light
The warning light comes on
for a few seconds when the
ignition is switched on.
Illumination of this warning light while
the engine is running indicates:
- a front air bag fault,
or
- a side air bag fault.
Contact a PEUGEOT dealer.
Low fuel level warning
light
The warning light comes on
for a few seconds when the ignition
is switched on.
Illumination of this warning light while
the engine is running indicates that
the fuel level is low.
When the warning comes on, you
have at least 8 litres of fuel left.
Front brake pad wear
warning light
Lighting of this warning light while
the engine is running and the vehicle
is moving and when you press the
brake pedal indicates extreme wear
of the front brake pads.
Contact a PEUGEOT dealer as soon
as possible.
Electronic immobiliser
key warning light
This comes on for a few
seconds when the ignition is
switched on.
Flashing of this warning light, after
the ignition has been switched on,
indicates an operating anomaly.
If this warning light comes on (perma-
nently) after the ignition is switched
on, check the identiication of the key.
Contact a PEUGEOT dealer as soon
as possible.
Automatic gearbox
temperature or fault
warning light
This comes on for a few seconds
when the ignition is switched on.
Illumination or lashing of this warn-
ing light while the engine is running
and the vehicle is moving indicates
an automatic gearbox fault or an
excessive automatic gearbox tem-
perature.
Stop immediately.
Allow the engine to run at idle (lever
in position N or P) until the warning
light switches off.
Contact a PEUGEOT dealer as soon
as possible.
Coolant temperature gauge
When the needle is in zone A, the
temperature is correct.
When the needle is in zone B, the
temperature is too high.
Stop immediately.
Warning: allow the engine to cool
before topping up.
The cooling circuit is pressurised.
To avoid any risk of scalding, un-
screw the cap by two turns to allow
the pressure to drop.
When the pressure has dropped, re-
move the cap and top up the level.
Contact a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS

22
01-01-2005
23
01-01-2005
INSTRUMENT PANEL
DISPLAY
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder/total and trip distances.
Service indicator
This informs you of the distance
remaining to the service in conform-
ity with the manufacturer's servicing
schedule.
Operation
For a few seconds after the ignition
has been switched on, the spanner
symbolising a service lights up; the
display for the total distance recorder
tells you the distance remaining be-
fore your next service.
The values displayed by the service
indicator before the next service are
the following: 30 000 km, 2 000 km,
200 km, 100 km and 50 km. Consult
the servicing booklet.
Example: 2 000 km remain before
the next service is due. When the
ignition is switched on and for a few
seconds, the display shows:
Zero re-set
Your PEUGEOT dealer carries out
this operation after each service.
However, if you carry out the service
yourself, the re-set procedure is as
follows:
F Place the ignition key in the MAR
position (1st notch) and wait until
the spanner stops lashing,
F Press the trip recorder re-set but-
ton for ive seconds.
The distance remaining to the next
service is displayed.
F Press the trip distance recorder
zero reset button for ive seconds to
store the operation in the memory.
Important: after this operation, if you
wish to disconnect the battery, lock
the vehicle and wait for at least ive
minutes, otherwise the zero re-set
will not be registered.
INSTRUMENTS AND CONTROLS

22
01-01-2005
23
01-01-2005
Engine oil level indicator
When the ignition is switched on, the
engine oil level is indicated for a few
seconds, after the servicing informa-
tion.
Maximum
Check the level using the dipstick to
conirm whether the display is cor-
rect; a surplus of oil can cause dam-
age to the engine.
Contact a PEUGEOT dealer without
delay.
Minimum
Check the level with the dipstick and
top it up. The igure shown is only
correct if the vehicle has been on lev-
el ground, with the engine stopped,
for 10 minutes.Minimum oil level gauge fault
Flashing of the segments indicates a
fault in the oil level gauge
or a lack
of oil.
There is a risk the engine will be
damaged.
Contact a PEUGEOT dealer.
Maximum oil level gauge fault
Flashing of the squares indicates a
fault in the oil level gauge or a sur-
plus of oil.
There is a risk the engine will be
damaged.
Contact a PEUGEOT dealer. Excessive oil level
Check the level using the dipstick to
conirm whether the display is cor-
rect, a surplus of oil can cause dam-
age to the engine.
Contact a PEUGEOT dealer without
delay.
Trip recorder zero reset
button
With the ignition on, press the button
until the zeros appear.
INSTRUMENTS AND CONTROLS