Peugeot iOn 2011 Owner's Manual
Page 101 of 164
8
Practical information
99
Slacken fixing screw D , while holding the
bumper away. )Slacken fixing screw E.
) Pull the lamp towards you, and disengage
the tab Fto remove it completely.
Page 102 of 164
i
Practical information
100
Changing a sidelamp bulb
)
Turn the bulb holder to the left and
pull it out. ) Pull the bulb out and replace it.
To r efit, carry out these operations in reverseorder.
Changing a main beam headlampbulb
)Turn the bulb holder to the left andpull it out. )Pull the bulb out, pressing its tab. )Replace the bulb.
To r efit, carry out these operations in reverse order.
Changing a direction indicator
bulb
)Turn the bulb holder to the left andremove it. )Pull the bulb and change it.
To r e f i t , c a r ry out these operations in reverse order.
Coloured bulbs must be replaced with bulbs of identical specification andcolour.
Page 103 of 164
8
Practical information
101
Changing a dipped beamheadlamp bulb
)Turn the bulb holder to the left andpull it out. )Remove the bulb by pressing its tab. )Replace the bulb.
To r efit, carry out these operations in reverse order.
Changing a foglamp/daytime running lamp bulb
)
Turn the wheels onto full lock to improveaccess. )
Remove the clips holding the protective cover over the bulb holder. )
Pull the cover away.
)
Turn the bulb holder ( Afor the foglamp, Bfor the daytime running lamps) to the left
and pull it out.
) Pull the bulb out and replace it.
To r e f i t , c a r ry out these operations in reverseorder.
Page 104 of 164
i
i
Practical information
102
1.Brake lamps/Sidelamps (LEDs).2. Direction indicators (W Y21W - 21 W).3.Reversing lamps (W21W - 21 W).
Rear lamps
Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specification and colour.
In some weather conditions (e.g. lowtemperature or humidity), the presenceof misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lampshave been on for a few minutes.
Changing an integrated direction
indicator side repeater (WY5W - 5 W)
)Push the repeater towards the rear anddetach it. )Turn the bulb holder to the left andpull it out. )Pull the bulb out and replace it.
To r e f i t , c a r ry out these operations in reverse order.
Page 105 of 164
8
Practical information
103
Changing a direction indicator bulb
) Turn the bulb holder to the left and
pull it out. ) Pull the bulb out and replace it.
To r efit, carry out these operations in reverse order.
Access to bulbs
)Remove the two screws. )Disengage the lamp unit by pulling it
towards you.
Changing a brake/sidelamp bulb
All work on the LED lamps must be carried out
by a PEUGEOT dealer or a qualified workshop.
Changing a reversing lamp bulb
)
Turn the bulb holder to the left and pull it out. )
Pull the bulb out and replace it.
To r efit, carry out these operations in reverseorder.
Page 106 of 164
Practical information
104
Changing a foglamp bulb (W21W - 21 W)
)Remove the cover. )Turn the bulb holder to the left andpull it out. )Pull the bulb out and replace it.
To r e f i t , c a r r
y out these operations in reverse order.
Changing the third brake lamp(W5W 5W)
)
Remove the two screws. )
Remove the bulb holder. )
Pull the bulb out and replace it.
To r efit, carry out these operations in reverse
order.
Changing a number plate lamp
bulb (W5W 5W)
)Push the cover inwards. )Turn the bulb holder and pull it out. )Pull the bulb out and replace it.
To r efit, carry out these operations in reverse
order.
Page 107 of 164
8
i
!
Practical information
105
Changing a fuse
The extraction tweezer is fitted to the back of
the fusebox cover in the dashboard (left handside).
For access: )Unclip the cover and remove it completely by pulling it towards you. )Remove the tweezer.
Access to tools
Before changing a fuse, the cause of the failure
must be identified and rectified. ) Check that the ignition switch is in
the "LOCK " position. )
Identify the faulty fuse by checking
the condition of its filament.
Changing a fuse
Good Failed
)
Use the special tweezer to extract the fuse from its location. )
Always replace the faulty fuse with a fuse
of the same rating. ) Check that the number etched on the box,
the rating etched on the top and the tablesbelow all agree.
PEUGEOT will not accept responsibilityfor the cost incurred in repairing your vehicle or for rectifying the malfunctionsresulting from the installation of accessories not supplied and not recommended by PEUGEOT andnot installed in accordance with itsinstructions, in par ticular when the consumption of all of the additional equipment connected exceeds 10 milliamperes.
Your vehicle's electrical system isdesigned to operate with standard or optional equipment.
Before installing other electrical equipment or accessories in your vehicle, contact a PEUGEOT dealer or a qualified workshop.
Page 108 of 164
Practical information
106
Dashboard fuses
The fusebox is placed in the lower dashboard (left-hand side).
Fuse N°RatingFunctions
1
7. 5 A
Left hand front and rear sidelamps.
2
15 A
Accessor
y socket.
3
-
N
ot used
.
4
7.5 A
Starter motor.
5
20 A
Audio system .
6
-
Not used.
7
7.5 A
Vehicle equipment, ri
ght hand front and rear sidelamps.
8
7.5 A
Electric door mirrors.
9
7. 5
A Supervisory controller.
10
7.5 A
Air conditionin
g.
11
10 A
Rear fo
glamp.
12
15 A
Door lockin
g.
13
10 A
Courtesy lamp.
Page 109 of 164
8
Practical information
107
Fuse N°RatingFunctions
14
15
A Rear wiper.
15
7.5 A
Instrument panel.
16
7.5 A
Heatin
g.
17 20 A
H
eated seat.
18
10 A
Option.
19
7.5 A
Door mirror heatin
g.
20
20 A
Windscreen wiper.
21
7.5 A
Airbags.
22
30 A Heated rear screen.
23
30 A
Heatin
g.
24
-
Non used.
25
10 A
R
adio.
26
15 A
Passen
ger compar tment fuse.
Access to the fuses
See "Access to tools".
Page 110 of 164
i
Practical information
108
Fuse N°RatingFunctions
1
-
Not used.
2
30 A
Int
ernal fuse.
3
40 A
Electric motor.
440 A
Radiator fan.
5
40 A
El
ectric windows.
6
30 A
Vacuum pump.
7
15 A
Main battery E
CU.
8
15 A
Third brake lamp.
9
15 A
Front fo
glamps.
10
15 A
Water pump.
Front compartment fuses
The fusebox is placed in the front compar tment
under the heating system reservoir. Only these
fuses can be replaced.
The replacement of fuses for other units (vacuum pump and battery accessories) requires the involvement of a PEUGEOT dealer or a qualifiedworkshop.